Accuform
Safety and Welding Products
View:
Active Filters :
- Main Category: Safety and Welding Products
- Brand: Accuform Klein Ninja Roxell
Part #:303050
- Lock out machinery and inform readers not to operate the related device.
Properly lock out equipment and machinery in the workplace or facility to ensure safety of all personnel
Traditional OSHA-style signs, tags and labels are the most widely recognized design format in the industry
Danger header indicates a hazardous situation that, if not avoided, will result in death or serious injury
Qty:
Part #:506505
- Floor Stripe&trade High Performance Message Marking Tapes Identify and call attention to hazards throughout your facility. Printed 1-mil polyester tapes have 1-mil gloss over-laminate. Acrylic adhesive backing provides high tack and bond to a variety of smooth and rough surfaces. Available 3" wide x 50-ft. roll. Tapes can be custom printed with your message, graphic, or logo. Contact us with part number PTP155.
Part #:806845
- Clearly mark an exit in your warehouse, office, or facility. Clearly marked exits can make evacuating in an emergency easier.
Material Details
Plastic with protected surface coating (see details above)
Impact resistant with slight flexibility
Service temperature range -90°F to 168°
Lightweight indoor/outdoor use
Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes
Recycle code 6
$
13.60
Qty:
Part #:805103
- Fall-Arrest Harness, Medium
&bull Designed to arrest free falls and distribute impact forces over thighs, pelvis, chest and shoulders as required by OSHA&bull For workers who also need positioning in addition to fall arrest, this harness allows insertion of an existing positioning belt through 5-Inch (127 mm) backstrap loops on the harness&bull Easily adjusts for proper fit and function&bull Waist strap has friction-style buckle for adjustments over a continuous range of sizes&bull Friction slide adjusters hold shoulder straps in place so the user does not need to readjust for each use&bull Seat strap adds extra comfort and support&bull Tongue buckles with grommeted leg straps provide comfortable fit over a range of sizes&bull Durable 1-3/4'' (44 mm) Type 13, or equivalent, nylon webbing harness construction&bull Drop-forged circle D-ring with roller has corrosion-resistant finish, wear-minimizing roller and is proof-loaded to meet OSHA regulations&bull Identity and warning tags and/or labels are reminders of proper application and inspection procedures. The Klein name, model, date of manufacture and OPE-system application symbol(s) are permanently and clearly inscribed on these tags and labels&bull Certified and compliant with ANSI and CSA requirements
Qty:
Part #:501013
- Lightweight Fall-Arrest Harness, Large
&bull Designed to arrest free falls and distribute impact forces over thighs, pelvis, chest and shoulders as required by OSHA&bull For workers who also need positioning in addition to fall arrest, this harness allows insertion of an existing positioning belt through 5-Inch (127 mm) backstrap loops on the harness&bull Easily adjusts for proper fit and function&bull Waist strap has friction-style buckle for adjustments over a continuous range of sizes&bull Friction slide adjusters hold shoulder straps in place so the user does not need to readjust for each use&bull Seat strap adds extra comfort and support&bull Tongue buckles with grommeted leg straps provide comfortable fit over a range of sizes&bull Drop-forged circle D-ring has corrosion-resistant finish, wear-minimizing roller and is proof-loaded to meet OSHA regulations&bull Identity and warning tags and/or labels are reminders of proper application and inspection procedures. The Klein name, model, date of manufacture and OPE-system application symbol(s) are permanently and clearly inscribed on these tags and labels&bull Certified and compliant with ANSI and CSA requirements&bull Durable 1-3/4'' (44 mm) Type 13, or equivalent, nylon webbing harness construction
Qty:
Part #:521006
- Lightweight Fall-Arrest Harness, X-Large
&bull Designed to arrest free falls and distribute impact forces over thighs, pelvis, chest and shoulders as required by OSHA&bull For workers who also need positioning, this harness allows insertion of an existing positioning belt through 5-Inch (127 mm) backstrap loops on the harness&bull Easily adjusts for proper fit and function&bull Waist strap has friction-style buckle for adjustments over a continuous range of sizes&bull Seat strap adds extra comfort and support&bull Friction slide adjusters hold shoulder straps in place so the user does not need to readjust for each use&bull Drop-forged circle D-ring has corrosion-resistant finish, wear-minimizing roller and is proof-loaded to meet OSHA regulations&bull Durable 1-3/4'' (44 mm) Type 13, or equivalent, nylon webbing harness construction&bull Tongue buckles with grommeted leg straps provide comfortable fit over a range of sizes&bull Identity and warning tags and/or labels are reminders of proper application and inspection procedures. The Klein name, model, date of manufacture and OPE-system application symbol(s) are permanently and clearly inscribed on these tags and labels&bull Certified and compliant with ANSI and CSA requirements
Qty:
Part #:521007
- Deceleration Unit with Rope Lanyard
&bull Designed solely for use in fall-arrest systems&bull Equipped with two drop-forged steel, corrosion-resistant Klein-Lok locking snap-hooks with 11/16-Inch (17 mm) throat opening&bull Attached to a 1/2-Inch (13 mm) diameter nylon-filament rope lanyard&bull Long-strand nylon filament lanyard construction provides high tensile strength and good abrasion resistance&bull Overlapped nylon webbing is heavily cross-stitched together with nylon thread and sewn into a protective break-away jacket for optimal fall-arrest impact reduction&bull A fully released deceleration unit extends the original length of a lanyard by a total of 3.5 ft (1.07 m) and virtually eliminates rebound&bull Red warning label stitched to the overlapped nylon webbing inside the protective break-away jacket will identify a used lanyard and direct the disposal of the unit&bull Certified and compliant with ANSI and CSA requirements&bull Deceleration units are available separately or with permanently attached lanyards made of nylon rope, aircraft cable or nylon webbing
Qty:
Part #:504330
- Nylon Webbing Lanyard, 1/2-Inch by 6-Foot
&bull Long-strand nylon-filament construction provides very high tensile strength and excellent elasticity&bull Equipped with two drop-forged steel, corrosion-resistant Klein-Lok locking snap hooks with 11/16-Inch (17 mm) throat opening&bull For use in positioning, suspension, or retrieval systems. Can also be used with a deceleration unit for fall-arrest&bull U.S.-made for greater durability and excellent quality
Qty:
Part #:805447
- Nylon-Webbing Lanyard Adjustable 6.5 to 10-Foot
&bull Convenient adjustable length&bull Nylon-webbing lanyards are ideal for positioning and in situations where the worker is often turning or moving around (webbing will not reverse-twist [hockle])&bull Equipped with two drop-forged steel, corrosion-resistant Klein-Lok locking snap hooks with 11/16-Inch (17 mm) throat opening&bull 1-Inch (25 mm) wide orange nylon webbing impregnated with resin for greater durability and abrasion resistance&bull For use in positioning, suspension, or retrieval systems. Can also be used with a deceleration unit for fall-arrest
Qty:
Part #:521047
Qty:
Part #:841-127-N9690L
- MCR Safety Ninja® Ice GlovesProduct DetailsDesigned with HPT coating (Hydropellent Technology)Nylon outer shell with an acrylic terry interior linerRepels liquids while retaining strong gripSuitable for cold weather/storage applicationsCoating remains soft in temperatures as low as -58 F°Lining treated with Actifresh to reduce bacteria buildup
$
9.10
Qty:
Part #:803342
- Heavy-Duty Snap Hook for Block and Tackle
&bull Snaps on with one hand&bull Forged hook may be used on many conventional steel blocks, 4-Inches (102 mm) or smaller&bull Maximum safe load 8000-pounds (3629 kg)&bull Hook fits under insulator and engage pin on cross arm&bull These are NOT occupational protective devices. NOT for human support
Qty:
Part #:506257
- Holds tight onto circuit breaker for a secure and solid lockout to avoid hazards.
Easily applied by standard flathead screwdriver
Red octagon shape reinforces lockout status
Fits most 120/240 circuit breakers
Accommodates up to 9/32-inch diameter padlock shackles (sold separately)
Single pole 13/16-inch W x 3-inch L x 3/4-inch H
Qty:
Part #:5020-CXB631
- Block access to a confined space, while indicating a permit only entry.
Use the crossbucks to physically block the entryway of a confined space
Restrict access by posting permit only entry
Traditional OSHA-style signs, tags and labels are the most widely recognized design format in the industry
Danger header indicates a hazardous situation that, if not avoided, will result in death or serious injury
Selected Material Details
Manufactured with 50% Post-Consumer Recycled plastic and is recyclable &ndash code 2
Polyethylene plastic with matte surface
Impact resistant with slight flexibility
Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes
Service temperature range -90°F to 168°
Qty:
Part #:5020-FBW555
$
78.00
Qty:
Part #:5020-FBW555 30IN X 30IN
$
56.00
Qty:
Part #:5020-TRF1218
$
46.00
Qty:
$
11.85
Qty:
Part #:5020-PRC202RD
- Set up a barrier quickly and economically with plastic chain and stanchion posts.
Use these chain links to corral or direct pedestrian traffic
Also can be used to designate an area that should not be entered
Lightweight, yet remarkably strong, polyethylene plastic
Available in solid colors and alternating color chain that changes color every two feet
Chain can be cut to your required length (maximum continuous length is 500 feet)
$
0.88
FT
Qty:
Part #:5020-FRMGT207CTP
Qty:
$
18.98
Qty:
$
3.45
Qty:
Part #:5020-TRM105CTP
$
14.13
PACK
Qty:
Displaying: 1 - 24 of 24 Matching Items