Product Description
Advanced Full Synthetic Engine Oil
Advanced Full Synthetic Engine Oil
Features and Benefits
Mobil 1 advanced full-synthetic motor oil 5W-20 utilizes Mobil 1's signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness.
Helps protect critical engine parts for up to 10,000 miles between oil changes,* controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
Helps extend engine life by working to prevent damaging deposits and sludge buildup
Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)
Mobil 1™ 5W-20 is recommended by ExxonMobil for all types of modern gasoline-powered vehicles, including high-performance turbocharged, supercharged, multi-valve fuel injected engines found in passenger cars, SUVs, light vans and light trucks.
• Mobil 1 5W-20 is a high-performance motor oil for all types of cars where this viscosity is recommended.
• Mobil 1 5W-20 is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.
Always check your owner's manual for the manufacturer's recommended oil viscosity grade, API service classification and any builder approval.
*Potential fuel economy improvement obtained by switching from higher-viscosity oils to a lower-viscosity grade. Actual savings are dependent upon vehicle/engine type, outside temperature, driving conditions, and your current engine oil viscosity.
**Protects for up to 10,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US.
***Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ PCMO full-synthetic/ 52 weeks ending May 28, 2022.
This product is recommended for use in applications requiring: |
Ford WSS-M2C930-A |
Ford WSS-M2C945-A |
FORDWSS-M2C945-B1 |
GM6094M |
This product meets or exceeds the requirements of: |
FORDWSS-M2C960-A1 |
APISJ |
APISL |
APISM |
APISN |
APISN PLUS |
APISN PLUS RESOURCE CONSERVING |
API SN Resource Conserving |
APISP |
API SP Resource Conserving |
ILSACGF-6A |
Chrysler MS-6395 |
Property |
|
Grade |
SAE 5W-20 |
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
46.28 |
Pour Point, °C, ASTM D97 |
-45 |
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
8.418 |
Density @ 15.6 C, g/ml, ASTM D4052 |
0.8453 |
Flash Point, Cleveland Open Cup, °C, ASTM D92 |
233 |