Square D
Smith-Blair Inc
View:
Active Filters :
- Brand: Smith-Blair Inc Square D
- Sub Category: Bell Joint Clamp Repair Clamp Double Band Tapping Sleeve
Part #:202935
- 227 Full Circle Clamp DI Lug - Double Band - For repairing complete breaks, splits, holes in pipe or joining pipe
Description These clamps provide fast, economical means for repairing full circumferential breaks,holes, cracks and other types of damage.Application Works on Cast and Ductile Iron, Steel, Asbestos Cement, Copper, Aluminum, PVC, HDPE,Fiberglass and other pipe types.Key Features
&bullWorking pressure up to 175 PSI
&bullNominal temperature range -20°F to 180°F
&bullRemovable lugs to allow installation in tight spaces
&bullMay be used to join plain end pipe of the same diameter
&bullStandard widths through 30" (221 standard is 5")&bull360° gasket seal
&bullFlexi-Coat® Epoxy Finish for corrosion resistance
&bullRange up to .80" in double band
&bullDrop-in bolts for easier installation
Qty:
Part #:202263
- 227 Full Circle Clamp DI Lug - Double Band - For repairing complete breaks, splits, holes in pipe or joining pipe
Description These clamps provide fast, economical means for repairing full circumferential breaks,holes, cracks and other types of damage.Application Works on Cast and Ductile Iron, Steel, Asbestos Cement, Copper, Aluminum, PVC, HDPE,Fiberglass and other pipe types.Key Features
&bullWorking pressure up to 175 PSI
&bullNominal temperature range -20°F to 180°F
&bullRemovable lugs to allow installation in tight spaces
&bullMay be used to join plain end pipe of the same diameter
&bullStandard widths through 30" (221 standard is 5")&bull360° gasket seal
&bullFlexi-Coat® Epoxy Finish for corrosion resistance
&bullRange up to .80" in double band
&bullDrop-in bolts for easier installation
Qty:
Part #:203056
- 227 Full Circle Clamp DI Lug - Double Band - For repairing complete breaks, splits, holes in pipe or joining pipe
Description These clamps provide fast, economical means for repairing full circumferential breaks,holes, cracks and other types of damage.Application Works on Cast and Ductile Iron, Steel, Asbestos Cement, Copper, Aluminum, PVC, HDPE,Fiberglass and other pipe types.Key Features
&bullWorking pressure up to 175 PSI
&bullNominal temperature range -20°F to 180°F
&bullRemovable lugs to allow installation in tight spaces
&bullMay be used to join plain end pipe of the same diameter
&bullStandard widths through 30" (221 standard is 5")&bull360° gasket seal
&bullFlexi-Coat® Epoxy Finish for corrosion resistance
&bullRange up to .80" in double band
&bullDrop-in bolts for easier installation
Qty:
Part #:200192
- 274 Bell-Joint Leak Clamp Bell Joint Leak Clamps for sealing and repairing bell and spigot joints.
Description Bell Joint Leak Clamp.Application Sealing and/or preventing leaks on Cast Iron bell and spigot caulked or rubber ring joints.Key Features
&bullDesigned to fit both caulked or rubber ring joints in virtually all classes and brands of Cast Iron or DuctileIron pipe within same nominal size
&bullSuitable for use on C900 and C905 PVC through 24" with the use of longer bolts-DR 18 minimum
&bullKee-Lok gasket design eliminates need for field cutting gaskets&mdashthe ends are easily joined&mdashno need ofstaples, tongs, tape or other gadgets to hold the gasket ends together (not available in 14", 30" or 36")
&bullFlexi-Coat® Fusion-Bonded Epoxy finish standard for great corrosion resistance
&bullCan be used to prevent leaking bell gaskets as well as repairing them
&bullCan be installed without interrupting the flow of the pipeline&bullFront and back pieces are interchangable
&bullAll Bell-Spigot pieces are identical, making installation easier
Qty:
Part #:200132
- 274 Bell-Joint Leak Clamp Bell Joint Leak Clamps for sealing and repairing bell and spigot joints.
Description Bell Joint Leak Clamp.Application Sealing and/or preventing leaks on Cast Iron bell and spigot caulked or rubber ring joints.Key Features
&bullDesigned to fit both caulked or rubber ring joints in virtually all classes and brands of Cast Iron or DuctileIron pipe within same nominal size
&bullSuitable for use on C900 and C905 PVC through 24" with the use of longer bolts-DR 18 minimum
&bullKee-Lok gasket design eliminates need for field cutting gaskets&mdashthe ends are easily joined&mdashno need ofstaples, tongs, tape or other gadgets to hold the gasket ends together (not available in 14", 30" or 36")
&bullFlexi-Coat® Fusion-Bonded Epoxy finish standard for great corrosion resistance
&bullCan be used to prevent leaking bell gaskets as well as repairing them
&bullCan be installed without interrupting the flow of the pipeline&bullFront and back pieces are interchangable
&bullAll Bell-Spigot pieces are identical, making installation easier
Qty:
Part #:204840
- 274 Bell-Joint Leak Clamp Bell Joint Leak Clamps for sealing and repairing bell and spigot joints.
Description Bell Joint Leak Clamp.Application Sealing and/or preventing leaks on Cast Iron bell and spigot caulked or rubber ring joints.Key Features
&bullDesigned to fit both caulked or rubber ring joints in virtually all classes and brands of Cast Iron or DuctileIron pipe within same nominal size
&bullSuitable for use on C900 and C905 PVC through 24" with the use of longer bolts-DR 18 minimum
&bullKee-Lok gasket design eliminates need for field cutting gaskets&mdashthe ends are easily joined&mdashno need ofstaples, tongs, tape or other gadgets to hold the gasket ends together (not available in 14", 30" or 36")
&bullFlexi-Coat® Fusion-Bonded Epoxy finish standard for great corrosion resistance
&bullCan be used to prevent leaking bell gaskets as well as repairing them
&bullCan be installed without interrupting the flow of the pipeline&bullFront and back pieces are interchangable
&bullAll Bell-Spigot pieces are identical, making installation easier
Qty:
Part #:204841
- 274 Bell-Joint Leak Clamp Bell Joint Leak Clamps for sealing and repairing bell and spigot joints.
Description Bell Joint Leak Clamp.Application Sealing and/or preventing leaks on Cast Iron bell and spigot caulked or rubber ring joints.Key Features
&bullDesigned to fit both caulked or rubber ring joints in virtually all classes and brands of Cast Iron or DuctileIron pipe within same nominal size
&bullSuitable for use on C900 and C905 PVC through 24" with the use of longer bolts-DR 18 minimum
&bullKee-Lok gasket design eliminates need for field cutting gaskets&mdashthe ends are easily joined&mdashno need ofstaples, tongs, tape or other gadgets to hold the gasket ends together (not available in 14", 30" or 36")
&bullFlexi-Coat® Fusion-Bonded Epoxy finish standard for great corrosion resistance
&bullCan be used to prevent leaking bell gaskets as well as repairing them
&bullCan be installed without interrupting the flow of the pipeline&bullFront and back pieces are interchangable
&bullAll Bell-Spigot pieces are identical, making installation easier
Qty:
Part #:200434
- 622 Tapping Sleeve, Fabricated Steel, Neck Seal - For tapping size-on-size or reducing branch connections on new or existing pipe
Description Tapping sleeve.Application For 4" pipe and larger reducing and size-on-size flanged outlets. Available with ¾"-6"threaded outlets.Key Features
&bullEasy to install&bullHas range to reduce inventory
&bullMeets AWWA C223 Standards&bullEpoxy Finish meets AWWA C213 Standards
&bullVirtually 360º support of the pipe
&bullRoll-resistant gasket will not bind
&bullGasket seal increases with line pressure
&bullNo special tools required to install the sleeve
&bullFlanged outlets are recessed to accept tapping valves
&bullFlexi-Coat® Fusion-Bonded Epoxy Finish is standard for superior corrosion resistance
&bull¾" test outlet to allow hydrostatic pressure test before tapping the pipe (not available in standard 4" x 4")
Qty:
Part #:204941
- 622 Tapping Sleeve, Fabricated Steel, Neck Seal - For tapping size-on-size or reducing branch connections on new or existing pipe
Description Tapping sleeve.Application For 4" pipe and larger reducing and size-on-size flanged outlets. Available with ¾"-6"threaded outlets.Key Features
&bullEasy to install&bullHas range to reduce inventory
&bullMeets AWWA C223 Standards&bullEpoxy Finish meets AWWA C213 Standards
&bullVirtually 360º support of the pipe
&bullRoll-resistant gasket will not bind
&bullGasket seal increases with line pressure
&bullNo special tools required to install the sleeve
&bullFlanged outlets are recessed to accept tapping valves
&bullFlexi-Coat® Fusion-Bonded Epoxy Finish is standard for superior corrosion resistance
&bull¾" test outlet to allow hydrostatic pressure test before tapping the pipe (not available in standard 4" x 4")
Qty:
Part #:202496
- 622 Tapping Sleeve, Fabricated Steel, Neck Seal - For tapping size-on-size or reducing branch connections on new or existing pipe
Description Tapping sleeve.Application For 4" pipe and larger reducing and size-on-size flanged outlets. Available with ¾"-6"threaded outlets.Key Features
&bullEasy to install&bullHas range to reduce inventory
&bullMeets AWWA C223 Standards&bullEpoxy Finish meets AWWA C213 Standards
&bullVirtually 360º support of the pipe
&bullRoll-resistant gasket will not bind
&bullGasket seal increases with line pressure
&bullNo special tools required to install the sleeve
&bullFlanged outlets are recessed to accept tapping valves
&bullFlexi-Coat® Fusion-Bonded Epoxy Finish is standard for superior corrosion resistance
&bull¾" test outlet to allow hydrostatic pressure test before tapping the pipe (not available in standard 4" x 4")
Qty:
Part #:204942
- 622 Tapping Sleeve, Fabricated Steel, Neck Seal - For tapping size-on-size or reducing branch connections on new or existing pipe
Description Tapping sleeve.Application For 4" pipe and larger reducing and size-on-size flanged outlets. Available with ¾"-6"threaded outlets.Key Features
&bullEasy to install&bullHas range to reduce inventory
&bullMeets AWWA C223 Standards&bullEpoxy Finish meets AWWA C213 Standards
&bullVirtually 360º support of the pipe
&bullRoll-resistant gasket will not bind
&bullGasket seal increases with line pressure
&bullNo special tools required to install the sleeve
&bullFlanged outlets are recessed to accept tapping valves
&bullFlexi-Coat® Fusion-Bonded Epoxy Finish is standard for superior corrosion resistance
&bull¾" test outlet to allow hydrostatic pressure test before tapping the pipe (not available in standard 4" x 4")
Qty:
Part #:204950
- 622 Tapping Sleeve, Fabricated Steel, Neck Seal - For tapping size-on-size or reducing branch connections on new or existing pipe
Description Tapping sleeve.Application For 4" pipe and larger reducing and size-on-size flanged outlets. Available with ¾"-6"threaded outlets.Key Features
&bullEasy to install&bullHas range to reduce inventory
&bullMeets AWWA C223 Standards&bullEpoxy Finish meets AWWA C213 Standards
&bullVirtually 360º support of the pipe
&bullRoll-resistant gasket will not bind
&bullGasket seal increases with line pressure
&bullNo special tools required to install the sleeve
&bullFlanged outlets are recessed to accept tapping valves
&bullFlexi-Coat® Fusion-Bonded Epoxy Finish is standard for superior corrosion resistance
&bull¾" test outlet to allow hydrostatic pressure test before tapping the pipe (not available in standard 4" x 4")
Qty:
Part #:204952
- 622 Tapping Sleeve, Fabricated Steel, Neck Seal - For tapping size-on-size or reducing branch connections on new or existing pipe
Description Tapping sleeve.Application For 4" pipe and larger reducing and size-on-size flanged outlets. Available with ¾"-6"threaded outlets.Key Features
&bullEasy to install&bullHas range to reduce inventory
&bullMeets AWWA C223 Standards&bullEpoxy Finish meets AWWA C213 Standards
&bullVirtually 360º support of the pipe
&bullRoll-resistant gasket will not bind
&bullGasket seal increases with line pressure
&bullNo special tools required to install the sleeve
&bullFlanged outlets are recessed to accept tapping valves
&bullFlexi-Coat® Fusion-Bonded Epoxy Finish is standard for superior corrosion resistance
&bull¾" test outlet to allow hydrostatic pressure test before tapping the pipe (not available in standard 4" x 4")
Qty:
Part #:205235
-
663 Tapping Sleeve, Stainless Steel, Finger Lug Style, Full Gasket - For tapping size-on-size or reducing branch connections on new or existing pipe
Description All stainless steel tapping sleeve with 360º gasket seal.Application For tapping size-on-size or reducing branch connections on new or existing pipe.Key Features&bull Easy to install&bull Range helps reduce inventory&bull Meets applicable AWWA C223 Standards&bull Molded-in ring in the gasket to ensure effective sealing&bull Nylon washers provided to improve bolt torque capability&bull Heavy gauge, all-Stainless Steel body for rugged performance&bull Fully chemically passivated for maximum corrosion protection&bull ¾" test outlet to allow hydrostatic pressure test before tapping the pipe&bull 360º seal provides maximum support and reinforcement around the pipe in case of pipe break&bull Body drawn out to accept the outlet neck adding to the overall strength of the area under the most stress
$
1,841.06
Qty:
Part #:417-22820178230001
- 228 Full Circle Clamp DI Lug - Multi-Band - For repairing complete breaks, splits, holes in pipe or joining pipe
Description These clamps provide fast, economical means for repairing full circumferential breaks,holes, cracks, and other types of breaks.Application Works on Cast Iron, Ductile Iron, Steel, Asbestos Cement, Copper, Aluminum, PVC,Fiberglass and other pipe types.Description These clamps provide fast, economical means for repairing full circumferential breaks,holes, cracks, and other types of breaks.Application Works on Cast Iron, Ductile Iron, Steel, Asbestos Cement, Copper, Aluminum, PVC,Fiberglass and other pipe types.Key Features&bull Stainless Steel bands&bull Removable lugs to allow installation in tight spaces&bull 18-8 Type 304 Stainless Steel band for corrosion resistance&bull 360° gasket seal&bull Flexi-Coat® Epoxy Finish for corrosion resistance&bull Drop-in bolts for easier installation&bull Stainless Steel bands&bull Removable lugs to allow installation in tight spaces&bull 18-8 Type 304 Stainless Steel band for corrosion resistance&bull 360° gasket seal&bull Flexi-Coat® Epoxy Finish for corrosion resistance&bull Drop-in bolts for easier installation
Qty:
Displaying: 1 - 15 of 15 Matching Items