True Temper
Armstrong
View:
Active Filters :
- Brand: Armstrong True Temper
Part #:504872
- 18 Inch Aluminum Snow Shovel with D-Grip Snow Shovels #1641000This aluminum shovel is a must-have! It&rsquos a classic snow shovel with a sturdy handle and a wear strip that&rsquos great for chipping at packed snow. The aluminum blade is rust-proof and durable and much lighter than a steel blade.
Qty:
Part #:801044
- #14 Poly Scoop with D-Grip on Hardwood Handle Poly Scoops #1680700This True Temper lightweight poly scoop is perfect for moving and scooping grain, seed, feed, fertilizers, and other granulated materials. It&rsquos also a useful and versatile garden tool. It&rsquos sturdy enough for general clean-up or for moving mulch, soil or even snow.
Qty:
Part #:505011
- 6.25 Inch Garden Hoe, Forged, with Wood Handle Specialty Hoes #71113
The Razor-Back garden hoe is for chopping and weeding in the toughest soils. Its 6.25-inch by 4.25-inch Forged, shank pattern steel blade has ultimate strength and durability. It also features a 54-inch hardwood handle for longer reach that allows the user to reduce stress in back, muscles, and joints while performing outdoor chores.
Qty:
Part #:509400
- Square Point Shovel with Tab Socket and Forward Turned Step, Wood Handle Transfer Shovels #44124
Description
Strength and durability make Razor-Back tools the choice of professionals. This sturdy square point shovel is an essential part of any tool assortment. It's perfect for moving loose garden material, sand, top soil or debris. It can also be used to shape beds, mix concrete, level off areas that need to be flat or to scrape stubborn material off driveways or other hard surfaces.
Qty:
Part #:706624
- Inverted Bucket Steam TrapsEnergy efficient because it's so reliable The inverted bucket is the most reliable steam trap operating principle known. The heart of its simple design is a unique leverage system that multiplies the force provided by the bucket to open the valve against pressure. Since the bucket is open at the bottom, it resists damage from water hammer, and wear points are heavily reinforced for long life. The inverted bucket has only two moving parts-the valve lever assembly and the bucket. That means no fixed points, no complicated linkage. Nothing to stick, bind or clog. Conserves energy even in the presence of wear Armstrong inverted bucket steam traps open and close based on the difference in density between condensate and steam-the inverted bucket principle. They open and close gently, minimizing wear. This simple fact means that inverted buckets are subject to less wear than some other types of traps. In fact, as an Armstrong inverted bucket trap wears, its tight seal actually improves. The valve and seat of the Armstrong trap provide essentially line contact-resulting in a tight seal because the entire closing force is concentrated on one narrow seating ring. An Armstrong inverted bucket steam trap continues to operate efficiently with use. Gradual wear slightly increases the diameter of the seat and alters the shape and diameter of the valve. But, as this occurs, a tight seal is still preserved-the ball merely seats itself more deeply. Corrosion-resistant parts The stainless steel valve and seat of the Armstrong inverted bucket steam trap are individually ground and lapped together in matched sets. All other working parts are wear- and corrosion-resistant stainless steel. Venting of air and CO2 The Armstrong inverted bucket provides continuous automatic air and CO2 venting with no cooling lag or threat of air binding. Operation against back pressure The Armstrong inverted bucket has excellent performance against back pressure. It has no adverse effect on inverted bucket operation other than to reduce its capacity by the low differential. The bucket simply requires less force to pull the valve open and cycle the trap. Freedom from dirt problems Armstrong designed its inverted bucket to be virtually free of dirt problems. The valve and seat are at the top of the trap, far away from the larger particles of dirt, which fall to the bottom. Here, the up-and-down action of the bucket pulverizes them. Since the valve of an inverted bucket is either fully closed or open, dirt particles pass freely. And the swift flow of condensate from under the bucket's edge creates a unique self-scrubbing action that sweeps dirt out of the trap.
Qty:
Part #:706681
- Steam Trap ConnectorsBesides 2000 Series stainless steel inverted bucket traps, the standard 360° connector or IS-2 connector with integral strainer can also be used on many Armstrong thermostatic, disc, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos two-bolt steam traps can use Armstrong connectors. IS-2 Stainless Steel Connector with Integral Strainer &bull A full line stainless steel strainer in the connector eliminates leak points and reduces installation time &bull A strainer that is not discarded when the trap is replaced &bull Easy strainer screen replacement &bull Optional blowdown valve &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos S-2 connector. Standard 360° Stainless Steel Connector &bull A compact, lightweight assembly &bull Standardization, reducing inventory &bull A compact design, simplifying piping &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer and bimetallic steam traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos standard connector.
Qty:
Part #:708464
- Steam Trap ConnectorsBesides 2000 Series stainless steel inverted bucket traps, the standard 360° connector or IS-2 connector with integral strainer can also be used on many Armstrong thermostatic, disc, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos two-bolt steam traps can use Armstrong connectors. IS-2 Stainless Steel Connector with Integral Strainer &bull A full line stainless steel strainer in the connector eliminates leak points and reduces installation time &bull A strainer that is not discarded when the trap is replaced &bull Easy strainer screen replacement &bull Optional blowdown valve &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos S-2 connector. Standard 360° Stainless Steel Connector &bull A compact, lightweight assembly &bull Standardization, reducing inventory &bull A compact design, simplifying piping &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer and bimetallic steam traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos standard connector.
Qty:
Part #:713360
-
Y-Type Cast Iron Strainers
250 lb Screwed 1/2"-3" Class 125 Flanged 2"-6" Class 250 Flanged 2"-6"
Screen chambers won't leak or crush
Both ends of the chambers are precisely machined. This means perfectly round and smooth seating surfaces, as well as a fixed chamber length. Since the screen seats snugly on the machined surface, no particle bigger than the screen opening can escape around the end of the screen.
Screwed retainers easy in, easy out
Straight threads mean it takes less torque to achieve a tight seal with proper gasket compression. Less torque is also required to remove the retainer. For you, that means less danger of "freezing in" than with hard-to-break tapered pipe threads.
Off-center blowdown connections for better dirt removal
Off-center drains on 2-1/2" and 3" strainers allow you to remove liquid and dirt nearly completely when blowing down the strainer. Also, less liquid will spill when the screen retainer is removed.
Many screen choices
Many screen materials, meshes and perforations are available.
Qty:
Part #:713363
-
Y-Type Cast Iron Strainers
250 lb Screwed 1/2"-3" Class 125 Flanged 2"-6" Class 250 Flanged 2"-6"
Screen chambers won't leak or crush
Both ends of the chambers are precisely machined. This means perfectly round and smooth seating surfaces, as well as a fixed chamber length. Since the screen seats snugly on the machined surface, no particle bigger than the screen opening can escape around the end of the screen.
Screwed retainers easy in, easy out
Straight threads mean it takes less torque to achieve a tight seal with proper gasket compression. Less torque is also required to remove the retainer. For you, that means less danger of "freezing in" than with hard-to-break tapered pipe threads.
Off-center blowdown connections for better dirt removal
Off-center drains on 2-1/2" and 3" strainers allow you to remove liquid and dirt nearly completely when blowing down the strainer. Also, less liquid will spill when the screen retainer is removed.
Many screen choices
Many screen materials, meshes and perforations are available.
Qty:
Part #:713364
-
Y-Type Cast Iron Strainers
250 lb Screwed 1/2"-3" Class 125 Flanged 2"-6" Class 250 Flanged 2"-6"
Screen chambers won't leak or crush
Both ends of the chambers are precisely machined. This means perfectly round and smooth seating surfaces, as well as a fixed chamber length. Since the screen seats snugly on the machined surface, no particle bigger than the screen opening can escape around the end of the screen.
Screwed retainers easy in, easy out
Straight threads mean it takes less torque to achieve a tight seal with proper gasket compression. Less torque is also required to remove the retainer. For you, that means less danger of "freezing in" than with hard-to-break tapered pipe threads.
Off-center blowdown connections for better dirt removal
Off-center drains on 2-1/2" and 3" strainers allow you to remove liquid and dirt nearly completely when blowing down the strainer. Also, less liquid will spill when the screen retainer is removed.
Many screen choices
Many screen materials, meshes and perforations are available.
Qty:
Part #:713365
Qty:
Part #:713366
-
Y-Type Cast Iron Strainers
250 lb Screwed 1/2"-3" Class 125 Flanged 2"-6" Class 250 Flanged 2"-6"
Screen chambers won't leak or crush
Both ends of the chambers are precisely machined. This means perfectly round and smooth seating surfaces, as well as a fixed chamber length. Since the screen seats snugly on the machined surface, no particle bigger than the screen opening can escape around the end of the screen.
Screwed retainers easy in, easy out
Straight threads mean it takes less torque to achieve a tight seal with proper gasket compression. Less torque is also required to remove the retainer. For you, that means less danger of "freezing in" than with hard-to-break tapered pipe threads.
Off-center blowdown connections for better dirt removal
Off-center drains on 2-1/2" and 3" strainers allow you to remove liquid and dirt nearly completely when blowing down the strainer. Also, less liquid will spill when the screen retainer is removed.
Many screen choices
Many screen materials, meshes and perforations are available.
Qty:
Qty:
Part #:507515
- 5 lb Wood Splitting Wedge #1132600
The wood splitting wedge is drop-forged steel that is used to split wood logs. This tool features square heads for striking and driving into logs. The 5-pound wedge is durable and painted black
Qty:
Part #:521260
- 10-inch x 10-inch Tamper with Hardwood Handle Tampers #1133700
This tamper is ideal for tamping asphalt, gravel, stone, and dirt. The high quality hardwood handle is flexible and durable. The heavy 10.6-pound steel head makes a great tool for heavy duty construction, industrial, and commercial applications.
Qty:
Part #:504983
- 71-in Post Hole Digging/ Tamper Bar #1160000
The Post Hole Digging Bar is used for digging and prying of dirt and large rocks and tamping soil. The tamper head is used to level ground around fence posts and deck supports. This tool has a durable design and is heat treated with quality carbon steel to withstand industrial use.
Qty:
Part #:504991
- 60-in Wedge Point Crow Bar Prying Bars #1160200The wedge point crow bar is 60-inch long straight heat treated carbon steel bar. This long handle is utilized to pry and move heavy objects with its wedge point. The typical uses for an 18-pound wedge point bar include breaking up clay, concrete, and other hard materials
Qty:
Part #:511972
- J-450, Pony Round Point Shovel with Solid Shank
The Jackson Professionals Tools round point shovel is the industry standard when it comes to digging. It is a commercial grade shovel featuring a solid shank blade. The overall construction is made to withstand repeated use in the toughest of conditions.
Features
Tough Solid Shank Blade
Strong Forward Turned-Step
Heavy-Duty Hardwood Handle
Enhanced Socket Design
Qty:
Part #:809645
- J-450, Pony Square Point Shovel with Solid Shank
The Jackson line is designed for consumers and professionals who expect high-quality features and durability. This sturdy square point shovel is perfect for moving loose garden material, sand, top soil or debris. It can also be used to shape beds, mix concrete, level off areas that need to be flat or to scrape stubborn material off driveways or other hard surfaces.
About This Product
The Jackson line is designed for consumers and professionals who expect high-quality features and durability. This sturdy square point shovel is perfect for moving loose garden material, sand, top soil or debris. It can also be used to shape beds, mix concrete, level off areas that need to be flat or to scrape stubborn material off driveways or other hard surfaces.
Length
3.5 in
Width
9.25 in
Height
58 in
Product #
1250300
Warranty
Ltd. Lifetime
UPC #
049206125032
Features
Tough Solid Shank Blade
Strong Forward Turned-Step
Heavy-Duty North American Hardwood Handle
Extended Blade Socket Design
Tough Solid Shank Blade
Strong Forward Turned-Step
Heavy-Duty North American Hardwood Handle
Extended Blade Socket Design
Tough Solid Shank Blade
Solid shank blade provides optimal strength while preventing soil buildup. Buy Online
Strong Forward Turned-Step
The forward-turned step provide secure foot placement for improved comfort and ease of use. Buy Online
Heavy-Duty Hardwood Handle
The heavy-duty hardwood handle on this shovel provides a comfortable grip and long lasting durability. Buy Online
Extended Blade Socket Design
The extended blade socket on this shovel creates a stronger connection between handle and blade. Buy Online
Tough Solid Shank Blade
Solid shank blade provides optimal strength while preventing soil buildup. Buy Online
Strong Forward Turned-Step
The forward-turned step provide secure foot placement for improved comfort and ease of use. Buy Online
Heavy-Duty Hardwood Handle
The heavy-duty hardwood handle on this shovel provides a comfortable grip and long lasting durability. Buy Online
Extended Blade Socket Design
The extended blade socket on this shovel creates a stronger connection between handle and blade. Buy Online
Other Jackson® Tools You May Like See All Long Handled Shovels
J-450, Pony Square Point Shovel with Solid Shank and Armor D-grip
1248800
See Product Details
J-450, Pony Round Point Shovel with Solid Shank
1201900
See Product Details
© 2022 The Ames Companies, Inc.
Contact Us
Tools
Wheelbarrows
Shovels & Scoops
Hammers & Sledges
Find The Right Wheelbarrow
About Jackson®
Why Choose Jackson®
Read About Our American Manufacturing
Sign Up for the latest News From Jackson® Professional Tools
Sign Up for the latest News From Jackson® Professional Tools
Visit Our Other Websites
Griffon Corporation
Careers@AMES
The AMES Companies
Privacy Policy
Terms of Use
Sitemap
Qty:
Part #:188-1603400
- This top of the line combo shovel is ideal for shoveling or pushing snow, thanks to its 18-inch combination blade. The nylon wear strip extends the life of the blade and prevents the gouging of decks and other surfaces. It also features an ergonomic handle and an oversized D-grip that easily accommodates a gloved hand.
Qty:
Part #:800126
- 24 Inch Poly Snow Pusher with D-Grip Snow Pushers #1603500
This pusher is ideal for clearing light to medium accumulations of snow. It is designed for easy use and fast snow removal. Clear driveways and walkways in just a few passes!
Qty:
Part #:801440
- 18 Inch Poly Combo Snow Shovel with D-Grip Snow Shovels #1627200This shovel blade is lightweight and ideal for both shoveling and pushing snow. Its steel wear strip extends the life of the blade and helps remove stubborn patches of snow and ice.
Qty:
Part #:713381
- Float and Thermostatic (F&T) Steam TrapsThe More Your Steam Pressure Varies, The More You Need Armstrong F&T TrapsWhen steam pressure may vary from maximum steam supply pressure to vacuum, Armstrong F&Ts are your most energy-efficient choice. Our line of F&Ts brings Armstrong performance, dependability and long life to trapping services requiring continuous drainage with high air venting capacity. Thanks to separate orifices for condensate and air, they provide continuous condensate drainage and air venting-even under conditions of zero pressure. All the benefits detailed here have been designed into Armstrong F&Ts through long experience in the manufacture of pressure float-type traps. They assure you of optimum operating efficiency for long periods with minimum trouble. How they work Float and thermostatic traps are mechanical units that operate on both density and temperature principles. The float valve operates on the density principle. A level connects the ball float to the valve and seat. Once condensate reaches a certain level in the trap, the float rises, opening the orifice and draining condensate. A water seal formed by the condensate prevents live steam loss. Since the discharge valve is under water, it is not capable of venting air and non-condensables. When the accumulation of air and con-condensable gases causes a significant temperature drop, a thermostatic air vent in the top of the trap discharges them. The thermostatic vent opens at a temperature a few degrees below saturation, so it's able to handle a large volume of air-through an entirely separate orifice-but at a slightly reduced temperature. Built as tough as the jobs they do Armstrong float and thermostatic traps are unique in their super heavy duty construction. Armstrong uses high quality ASTM A48 Class 30 cast iron or ASTM A216 WCB cast steel-normally found in pressure vessels rated to 250 psi (17 bar) or 465 psi (32 bar). Internal mechanisms are made from stainless steel and are heavily reinforced. No brass cotter pins here. Valves and seats are stainless steel, hardened, ground and lapped to withstand the erosive forces of flashing condensate. Why go to all this trouble for traps normally recommended for low-pressure, modulating service? The operative word here is modulating. Modulating pressures mean widely varying loads, thermal cycling and high air and non-condensable gas loads. In other words tough service. Inferior, lightweight construction in this kind of service is a mistake waiting to happen. Trap failures on modulating pressure may lead to water hammer, corrosion and even damage to heat exchangers. Armstrong's published capacities are based on actual measurements of traps handling hot, flashing condensate. Competitive F&Ts may utilize theoretical calculated capacities. Armstrong uses its own steam lab to give you actual capacity-especially important on high-capacity traps such as those in our ultra-capacity line. Not only does Armstrong offer super heavy duty construction for long life and reliability, but we also supply the data to back up performance. Here's a simple, easy-to-remember summary The more your pressure varies, the more you need Armstrong F&Ts.
Qty:
Part #:511973
- The Jackson Professionals Tools round point shovel is the industry standard when it comes to digging. It is a commercial grade shovel featuring a solid shank blade. The overall construction is made to withstand repeated use in the toughest of conditions.
Qty:
Displaying: 1 - 24 of 2,008 Matching Items