1/2in
Underground Utility Supplies
View:
Active Filters :
- Main Category: Underground Utility Supplies
- Size: 1/2in 2in x 1/2in 2in 12in x 8in
Part #:203955
- Straight Couplings SAME CONNECTIONS ON BOTH ENDS - NO INTERNAL PIPE STOP ON STRAIGHT SIZES -22 CTS x -22 CTS
A.Y. McDonald Service Fittings are manufactured to meet or exceed the AWWA C800 (latest revision) standard. Our service fittings arerated to withstand the same pressures as the tubing they are designed to fit. They are designed and tested for cold potable water only.EPDM rubber gaskets are used in our Compression fittings.
Qty:
Part #:206860
- Straight Ball Valves - Compression 90º DEGREE ON/OFF TEE OPERATING HEAD -22 CTS x -22 CTS
A.Y. McDonald Ball Curb Stops maintain a low turning torque and bubble-tight 300 PSIG water pressure rating due to the PTFE coated brassball that is supported by two blow-out proof EPDM seals. The end piece joint is sealed with an EPDM O-ring and thread locker. McDonaldBall Curb Stops offer positive shut-off from either direction and are available with a wide variety of end connections.
$
896.90
Qty:
Part #:204010
- Plug Style AWWA x Flare
A.Y. McDonald Plug Style Corporation Stops come standard with a 360º operating head. The one piece body and plug are precisionmachined to assure a perfect match between the plug and the body to allow operating pressures of 100 PSI on 1/2&rdquo, 3/4&rdquo and 1&rdquo valvesand 80 PSI on 1 1/4&rdquo, 1 1/2&rdquo and 2&rdquo valves. This same machining precision carries over to the threads to assure A.Y. McDonald&rsquos highquality and compatibility with direct taps and saddle applications.
$
689.63
Qty:
Part #:204024
- Plug Style - AWWA Inlets AWWA x -22 CTS
A.Y. McDonald Plug Style Corporation Stops come standard with a 360º operating head. The one piece body and plug are precisionmachined to assure a perfect match between the plug and the body to allow operating pressures of 100 PSI on 1/2&rdquo, 3/4&rdquo and 1&rdquo valvesand 80 PSI on 1 1/4&rdquo, 1 1/2&rdquo and 2&rdquo valves. This same machining precision carries over to the threads to assure A.Y. McDonald&rsquos highquality and compatibility with direct taps and saddle applications.
$
952.41
Qty:
Part #:205235
-
663 Tapping Sleeve, Stainless Steel, Finger Lug Style, Full Gasket - For tapping size-on-size or reducing branch connections on new or existing pipe
Description All stainless steel tapping sleeve with 360º gasket seal.Application For tapping size-on-size or reducing branch connections on new or existing pipe.Key Features&bull Easy to install&bull Range helps reduce inventory&bull Meets applicable AWWA C223 Standards&bull Molded-in ring in the gasket to ensure effective sealing&bull Nylon washers provided to improve bolt torque capability&bull Heavy gauge, all-Stainless Steel body for rugged performance&bull Fully chemically passivated for maximum corrosion protection&bull ¾" test outlet to allow hydrostatic pressure test before tapping the pipe&bull 360º seal provides maximum support and reinforcement around the pipe in case of pipe break&bull Body drawn out to accept the outlet neck adding to the overall strength of the area under the most stress
$
1,841.06
Qty:
Part #:211455
- Oval Meter Flange 1 1/2&rdquo & 2&rdquo METERS. Meter Flange Kit, Includes 2 each offlanges, gaskets, 4 bolts & 4 nuts
EPDM rubber gaskets are supplied and are standard. Oval meter flanges are faced and drilled per AWWA C700. All 7610 model ovalflanges in 2&rdquo have bolt holes for 2&rdquo meter only unless otherwise indicate
Insert stiffeners are required on all flexible plastic connections, see page 10 for stiffeners.- Stainless steel meter support brackets not included.- Bolt hole diameters on 1 1/2&rdquo oval flange = .72, 2&rdquo oval flange = .81.
$
348.97
Qty:
Part #:100367
- Aqua Jet I.D. Controlled PE-4710:
$
0.31
Qty:
Part #:100383
- Aqua Jet I.D. Controlled PE-4710:
$
0.30
Qty:
Part #:100456
- Aqua Jet I.D. Controlled PE-4710:
$
2.04
Qty:
Part #:201534
- Aqua Jet O.D. Controlled PE-4710:
$
2.83
Qty:
Part #:201535
- Aqua Jet O.D. Controlled PE-4710:
$
2.83
Qty:
Part #:201584
- Aqua Jet O.D. Controlled PE-4710:
$
283.00
Qty:
Part #:204187
-
All Fittings Meet or Exceed
&bull Materials ASTM D-1784, NSF Approved for potable water, NSF 61 &bull Joints ASTM D-3139 &bull Gaskets ASTM F-477 &bull Wall Thickness SDR-21 &bull Pressure Rating 200psi
Qty:
Part #:204213
-
All Fittings Meet or Exceed
&bull Materials ASTM D-1784, NSF Approved for potable water, NSF 61 &bull Joints ASTM D-3139 &bull Gaskets ASTM F-477 &bull Wall Thickness SDR-21 &bull Pressure Rating 200psi
Qty:
Part #:204220
-
All Fittings Meet or Exceed
&bull Materials ASTM D-1784, NSF Approved for potable water, NSF 61 &bull Joints ASTM D-3139 &bull Gaskets ASTM F-477 &bull Wall Thickness SDR-21 &bull Pressure Rating 200psi
Qty:
Part #:204237
-
All Fittings Meet or Exceed
&bull Materials ASTM D-1784, NSF Approved for potable water, NSF 61 &bull Joints ASTM D-3139 &bull Gaskets ASTM F-477 &bull Wall Thickness SDR-21 &bull Pressure Rating 200psi
Qty:
Part #:204244
-
All Fittings Meet or Exceed
&bull Materials ASTM D-1784, NSF Approved for potable water, NSF 61 &bull Joints ASTM D-3139 &bull Gaskets ASTM F-477 &bull Wall Thickness SDR-21 &bull Pressure Rating 200psi
Qty:
Part #:206264
- Aqua Jet O.D. Controlled PE-4710:
$
2.83
Qty:
Part #:210121
- All Fittings Meet or Exceed &bull Materials ASTM A-536 &bull Joints AWWA C-111 &bull Gaskets ASTM F-477 &bull Coating AWWA C-153
Qty:
Part #:203541
- 245 Redi-Clamp - For repairing punctures, splits, or holes in pipe.
Description A repair clamp designed to repair pin holes, punctures or splits. Application Works on Steel, PVC, HDPE, and Copper tube.
Key Features
Built to a specific pipe O.D.
Drop-in bolts help ease installation
Standard widths are 3", 6", 9" and 12"
Available in IPS, Copper tube, Ductile Iron and other sizes
Lugs are epoxy coated for great corrosion resistance&bullProvides 360º coverage, covering the full pipe surface
18-8 Type 304 Stainless Steel band for corrosion resistance
Economical means of repairing pin hole leaks, punctures and splits in pipe
Qty:
Part #:203316
- Shielded Rubber Coupling NO HUB 2" Cast Iron/Plastic x 2" Cast Iron/Plastic
Qty:
Part #:200222
- 226 Full Circle Clamp DI Lug Single Band - For repairing complete breaks, splits, holes in pipe or joining pipe
Description These clamps provide fast, economical means for repairing full circumferential breaks,holes, cracks and other types of damage.Application Works on Cast Iron, Ductile Iron, Steel, Asbestos Cement, Copper, Aluminum, PVC, HDPE,Fiberglass and other pipe types.Key Features
&bullStainless Steel bands&bullWorking pressure up to 300 PSI
&bullNominal temperature range -20°F to 180°F
&bullRemovable lugs to allow installation in tight spaces
&bullMay be used to join plain end pipe of the same diameter
&bullStandard widths through 30"
&bull360° gasket seal&bullFlexi-Coat® Epoxy Finish for corrosion resistance
&bullRange up to .40" in single band
&bullDrop-in bolts for easier installation
Qty:
Part #:203057
- 245 Redi-Clamp - For repairing punctures, splits, or holes in pipe.
Description A repair clamp designed to repair pin holes, punctures or splits. Application Works on Steel, PVC, HDPE, and Copper tube.
Key Features
Built to a specific pipe O.D.
Drop-in bolts help ease installation
Standard widths are 3", 6", 9" and 12"
Available in IPS, Copper tube, Ductile Iron and other sizes
Lugs are epoxy coated for great corrosion resistance&bullProvides 360º coverage, covering the full pipe surface
18-8 Type 304 Stainless Steel band for corrosion resistance
Economical means of repairing pin hole leaks, punctures and splits in pipe
Qty:
Part #:204930
- 525 Compression Coupling - For joining plain-end pipe of same outside diameters or replacing split or excessively damaged pipe
Description A ductile or malleable iron coupling with threaded ends that seal to the pipe when turned.Application Joining plain end pipe of the same diameter.Key Features
&bullStab fit for easier installation
&bullGalvanized finish for additional corrosion resistance
&bullDuctile or malleable iron metal parts for strength and corrosion resistance
&bullMay be used in most water, wastewater and industrial applications&bullWrench flats on the nuts and sleeve help with holding the coupling during tightening
&bullThe retainer cup holds the gasket in place and concentrates gasket compression where it is needed most
&bullThe compression coupling may be used in conjunction with Smith-Blair adapter gaskets to join Copper pipe
&bull Protected gasket extends the life of the gasket and provides electrical continuity between the pipe and the coupling
&bullDeflection of 2º per end allows for pipe movement and installation on pipe that is not perfectly aligned
Qty:
Displaying: 25 - 48 of 60 Matching Items