2-1/2in x 2in
Underground Utility Supplies
View:
Active Filters :
- Main Category: Underground Utility Supplies
- Size: 2-1/2in x 2in 2in 5/8in x 3/4in 6ft
Part #:203955
- Straight Couplings SAME CONNECTIONS ON BOTH ENDS - NO INTERNAL PIPE STOP ON STRAIGHT SIZES -22 CTS x -22 CTS
A.Y. McDonald Service Fittings are manufactured to meet or exceed the AWWA C800 (latest revision) standard. Our service fittings arerated to withstand the same pressures as the tubing they are designed to fit. They are designed and tested for cold potable water only.EPDM rubber gaskets are used in our Compression fittings.
Qty:
Part #:206860
- Straight Ball Valves - Compression 90º DEGREE ON/OFF TEE OPERATING HEAD -22 CTS x -22 CTS
A.Y. McDonald Ball Curb Stops maintain a low turning torque and bubble-tight 300 PSIG water pressure rating due to the PTFE coated brassball that is supported by two blow-out proof EPDM seals. The end piece joint is sealed with an EPDM O-ring and thread locker. McDonaldBall Curb Stops offer positive shut-off from either direction and are available with a wide variety of end connections.
$
896.90
Qty:
Part #:204010
- Plug Style AWWA x Flare
A.Y. McDonald Plug Style Corporation Stops come standard with a 360º operating head. The one piece body and plug are precisionmachined to assure a perfect match between the plug and the body to allow operating pressures of 100 PSI on 1/2&rdquo, 3/4&rdquo and 1&rdquo valvesand 80 PSI on 1 1/4&rdquo, 1 1/2&rdquo and 2&rdquo valves. This same machining precision carries over to the threads to assure A.Y. McDonald&rsquos highquality and compatibility with direct taps and saddle applications.
$
689.63
Qty:
Part #:204024
- Plug Style - AWWA Inlets AWWA x -22 CTS
A.Y. McDonald Plug Style Corporation Stops come standard with a 360º operating head. The one piece body and plug are precisionmachined to assure a perfect match between the plug and the body to allow operating pressures of 100 PSI on 1/2&rdquo, 3/4&rdquo and 1&rdquo valvesand 80 PSI on 1 1/4&rdquo, 1 1/2&rdquo and 2&rdquo valves. This same machining precision carries over to the threads to assure A.Y. McDonald&rsquos highquality and compatibility with direct taps and saddle applications.
$
952.41
Qty:
Part #:211455
- Oval Meter Flange 1 1/2&rdquo & 2&rdquo METERS. Meter Flange Kit, Includes 2 each offlanges, gaskets, 4 bolts & 4 nuts
EPDM rubber gaskets are supplied and are standard. Oval meter flanges are faced and drilled per AWWA C700. All 7610 model ovalflanges in 2&rdquo have bolt holes for 2&rdquo meter only unless otherwise indicate
Insert stiffeners are required on all flexible plastic connections, see page 10 for stiffeners.- Stainless steel meter support brackets not included.- Bolt hole diameters on 1 1/2&rdquo oval flange = .72, 2&rdquo oval flange = .81.
$
348.97
Qty:
Part #:100456
- Aqua Jet I.D. Controlled PE-4710:
$
2.04
Qty:
Qty:
Part #:201534
- Aqua Jet O.D. Controlled PE-4710:
$
2.83
Qty:
Part #:201535
- Aqua Jet O.D. Controlled PE-4710:
$
2.83
Qty:
Part #:201584
- Aqua Jet O.D. Controlled PE-4710:
$
283.00
Qty:
Part #:204187
-
All Fittings Meet or Exceed
&bull Materials ASTM D-1784, NSF Approved for potable water, NSF 61 &bull Joints ASTM D-3139 &bull Gaskets ASTM F-477 &bull Wall Thickness SDR-21 &bull Pressure Rating 200psi
Qty:
Part #:204213
-
All Fittings Meet or Exceed
&bull Materials ASTM D-1784, NSF Approved for potable water, NSF 61 &bull Joints ASTM D-3139 &bull Gaskets ASTM F-477 &bull Wall Thickness SDR-21 &bull Pressure Rating 200psi
Qty:
Part #:204220
-
All Fittings Meet or Exceed
&bull Materials ASTM D-1784, NSF Approved for potable water, NSF 61 &bull Joints ASTM D-3139 &bull Gaskets ASTM F-477 &bull Wall Thickness SDR-21 &bull Pressure Rating 200psi
Qty:
Part #:204237
-
All Fittings Meet or Exceed
&bull Materials ASTM D-1784, NSF Approved for potable water, NSF 61 &bull Joints ASTM D-3139 &bull Gaskets ASTM F-477 &bull Wall Thickness SDR-21 &bull Pressure Rating 200psi
Qty:
Part #:204244
-
All Fittings Meet or Exceed
&bull Materials ASTM D-1784, NSF Approved for potable water, NSF 61 &bull Joints ASTM D-3139 &bull Gaskets ASTM F-477 &bull Wall Thickness SDR-21 &bull Pressure Rating 200psi
Qty:
Part #:206264
- Aqua Jet O.D. Controlled PE-4710:
$
2.83
Qty:
Part #:210121
- All Fittings Meet or Exceed &bull Materials ASTM A-536 &bull Joints AWWA C-111 &bull Gaskets ASTM F-477 &bull Coating AWWA C-153
Qty:
Part #:200432
- Meter Bushings Changes thread size only. Converts 5/8&rdquo meter spud to 5/8&rdquo x 3/4&rdquo meter spud .- one bushing, .50 long
Female Meter x Male Meter
$
8.96
Qty:
Part #:203541
- 245 Redi-Clamp - For repairing punctures, splits, or holes in pipe.
Description A repair clamp designed to repair pin holes, punctures or splits. Application Works on Steel, PVC, HDPE, and Copper tube.
Key Features
Built to a specific pipe O.D.
Drop-in bolts help ease installation
Standard widths are 3", 6", 9" and 12"
Available in IPS, Copper tube, Ductile Iron and other sizes
Lugs are epoxy coated for great corrosion resistance&bullProvides 360º coverage, covering the full pipe surface
18-8 Type 304 Stainless Steel band for corrosion resistance
Economical means of repairing pin hole leaks, punctures and splits in pipe
Qty:
Part #:203316
- Shielded Rubber Coupling NO HUB 2" Cast Iron/Plastic x 2" Cast Iron/Plastic
Qty:
Part #:200222
- 226 Full Circle Clamp DI Lug Single Band - For repairing complete breaks, splits, holes in pipe or joining pipe
Description These clamps provide fast, economical means for repairing full circumferential breaks,holes, cracks and other types of damage.Application Works on Cast Iron, Ductile Iron, Steel, Asbestos Cement, Copper, Aluminum, PVC, HDPE,Fiberglass and other pipe types.Key Features
&bullStainless Steel bands&bullWorking pressure up to 300 PSI
&bullNominal temperature range -20°F to 180°F
&bullRemovable lugs to allow installation in tight spaces
&bullMay be used to join plain end pipe of the same diameter
&bullStandard widths through 30"
&bull360° gasket seal&bullFlexi-Coat® Epoxy Finish for corrosion resistance
&bullRange up to .40" in single band
&bullDrop-in bolts for easier installation
Qty:
Part #:204584
- 441 OMNI Cast Coupling - For joining plain-end pipe of same outside diameters or outside diameters within same nominal pipe size
Description Cast CouplingsApplication To join plain end pipes with the same or different O.D.s by changing followers and gaskets.Key Features&bull Heavy cast Ductile Iron parts for long life&bull Meets applicable AWWA C219 Standards&bull Flanges and gaskets can be mixed and matched on the same size nominal sleeve&bull Most couplings are stab fit, making installation a b eeze. No disassembly is required&bull Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories&bull One sleeve per nominal pipe size takes the guess work out of deciding which sleeve size to choose&bull Flanges are color coded by pipe type Red for iron pipe size O.D. Blue for Ductile O.D. and gray forAsbestos Cement O.D.&bull Gaskets and flanges a e permanently marked with a part number and range to facilitate proper selection&bull Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications
Qty:
Qty:
Qty:
Displaying: 25 - 48 of 55 Matching Items