3.80in-3.96in
Underground Utility Supplies
View:
Active Filters :
- Main Category: Underground Utility Supplies
- Range: 3.80in-3.96in 5.00in-5.63in 8.63in-9.05in 9.05in-9.40in
Part #:200192
- 274 Bell-Joint Leak Clamp Bell Joint Leak Clamps for sealing and repairing bell and spigot joints.
Description Bell Joint Leak Clamp.Application Sealing and/or preventing leaks on Cast Iron bell and spigot caulked or rubber ring joints.Key Features
&bullDesigned to fit both caulked or rubber ring joints in virtually all classes and brands of Cast Iron or DuctileIron pipe within same nominal size
&bullSuitable for use on C900 and C905 PVC through 24" with the use of longer bolts-DR 18 minimum
&bullKee-Lok gasket design eliminates need for field cutting gaskets&mdashthe ends are easily joined&mdashno need ofstaples, tongs, tape or other gadgets to hold the gasket ends together (not available in 14", 30" or 36")
&bullFlexi-Coat® Fusion-Bonded Epoxy finish standard for great corrosion resistance
&bullCan be used to prevent leaking bell gaskets as well as repairing them
&bullCan be installed without interrupting the flow of the pipeline&bullFront and back pieces are interchangable
&bullAll Bell-Spigot pieces are identical, making installation easier
Qty:
Part #:200193
- 372 Service Saddle, All Stainless Steel, Double Bolt - For repairing and restoring damaged branch connections, tapping branch connections on new or existing pipe
Description Stainless Steel service saddle with double bolt specifically designed for PVC pipe, but canbe used on other pipe types.Application Uniform sealing to provide uniform pipe support, without crushing action.Key Features&bullProvides maximum support and reinforcement&bullStandard width is 7½"
&bullAll 304 Stainless Steel construction for great corrosion resistance
&bullOutlet gasket is bonded into the band to provide optimum sealing efficiency
&bullCan be manufactured to odd size pipe O.D.s, not restricted to catalog sizes
&bullA wide variety of outlet sizes and thread types are available to meet demand up to 2"
&bullKeeper bar helps pull clamp around the pipe and helps close the clamp during installation
&bullOne saddle covers both iron pipe size and Ductile Iron O.D. pipe within the same nominal size
&bullOutlet Gasket has a hydro-mechanical lip to improve sealing as the pipeline pressure increases
Qty:
Part #:200191
- 372 Service Saddle, All Stainless Steel, Double Bolt - For repairing and restoring damaged branch connections, tapping branch connections on new or existing pipe
Description Stainless Steel service saddle with double bolt specifically designed for PVC pipe, but canbe used on other pipe types.Application Uniform sealing to provide uniform pipe support, without crushing action.Key Features&bullProvides maximum support and reinforcement&bullStandard width is 7½"
&bullAll 304 Stainless Steel construction for great corrosion resistance
&bullOutlet gasket is bonded into the band to provide optimum sealing efficiency
&bullCan be manufactured to odd size pipe O.D.s, not restricted to catalog sizes
&bullA wide variety of outlet sizes and thread types are available to meet demand up to 2"
&bullKeeper bar helps pull clamp around the pipe and helps close the clamp during installation
&bullOne saddle covers both iron pipe size and Ductile Iron O.D. pipe within the same nominal size
&bullOutlet Gasket has a hydro-mechanical lip to improve sealing as the pipeline pressure increases
Qty:
Part #:200434
- 622 Tapping Sleeve, Fabricated Steel, Neck Seal - For tapping size-on-size or reducing branch connections on new or existing pipe
Description Tapping sleeve.Application For 4" pipe and larger reducing and size-on-size flanged outlets. Available with ¾"-6"threaded outlets.Key Features
&bullEasy to install&bullHas range to reduce inventory
&bullMeets AWWA C223 Standards&bullEpoxy Finish meets AWWA C213 Standards
&bullVirtually 360º support of the pipe
&bullRoll-resistant gasket will not bind
&bullGasket seal increases with line pressure
&bullNo special tools required to install the sleeve
&bullFlanged outlets are recessed to accept tapping valves
&bullFlexi-Coat® Fusion-Bonded Epoxy Finish is standard for superior corrosion resistance
&bull¾" test outlet to allow hydrostatic pressure test before tapping the pipe (not available in standard 4" x 4")
Qty:
Part #:204941
- 622 Tapping Sleeve, Fabricated Steel, Neck Seal - For tapping size-on-size or reducing branch connections on new or existing pipe
Description Tapping sleeve.Application For 4" pipe and larger reducing and size-on-size flanged outlets. Available with ¾"-6"threaded outlets.Key Features
&bullEasy to install&bullHas range to reduce inventory
&bullMeets AWWA C223 Standards&bullEpoxy Finish meets AWWA C213 Standards
&bullVirtually 360º support of the pipe
&bullRoll-resistant gasket will not bind
&bullGasket seal increases with line pressure
&bullNo special tools required to install the sleeve
&bullFlanged outlets are recessed to accept tapping valves
&bullFlexi-Coat® Fusion-Bonded Epoxy Finish is standard for superior corrosion resistance
&bull¾" test outlet to allow hydrostatic pressure test before tapping the pipe (not available in standard 4" x 4")
Qty:
Part #:202496
- 622 Tapping Sleeve, Fabricated Steel, Neck Seal - For tapping size-on-size or reducing branch connections on new or existing pipe
Description Tapping sleeve.Application For 4" pipe and larger reducing and size-on-size flanged outlets. Available with ¾"-6"threaded outlets.Key Features
&bullEasy to install&bullHas range to reduce inventory
&bullMeets AWWA C223 Standards&bullEpoxy Finish meets AWWA C213 Standards
&bullVirtually 360º support of the pipe
&bullRoll-resistant gasket will not bind
&bullGasket seal increases with line pressure
&bullNo special tools required to install the sleeve
&bullFlanged outlets are recessed to accept tapping valves
&bullFlexi-Coat® Fusion-Bonded Epoxy Finish is standard for superior corrosion resistance
&bull¾" test outlet to allow hydrostatic pressure test before tapping the pipe (not available in standard 4" x 4")
Qty:
Part #:203065
- 313 Service Saddle, Double Bale - For tapping branch connections on new or existing pipe, installing line appurtenances
Description Double bale Ductile Iron service saddle with TaperSeal&trade gasket and wraparound bales toconnect branch lines, instruments, and other appurtenances to pipe.Application Tapping pipe for branch connections and to install service connections, air and vacuum valves.Key Features
&bullMeets applicable AWWA C800 Standards
&bullThe wide saddle body provides stability on the pipe
&bullThe gasket is fully bonded to the cavity to hold it in place
&bullNPT, CC and other threaded outlets available in sizes " thru 4"&bullA closed lug on one side, combined with the bale, acts as a hinge for easier installation
Qty:
Part #:203066
- 313 Service Saddle, Double Bale - For tapping branch connections on new or existing pipe, installing line appurtenances
Description Double bale Ductile Iron service saddle with TaperSeal&trade gasket and wraparound bales toconnect branch lines, instruments, and other appurtenances to pipe.Application Tapping pipe for branch connections and to install service connections, air and vacuum valves.Key Features
&bullMeets applicable AWWA C800 Standards
&bullThe wide saddle body provides stability on the pipe
&bullThe gasket is fully bonded to the cavity to hold it in place
&bullNPT, CC and other threaded outlets available in sizes " thru 4"&bullA closed lug on one side, combined with the bale, acts as a hinge for easier installation
Qty:
Part #:204846
- 313 Service Saddle, Double Bale - For tapping branch connections on new or existing pipe, installing line appurtenances
Description Double bale Ductile Iron service saddle with TaperSeal&trade gasket and wraparound bales toconnect branch lines, instruments, and other appurtenances to pipe.Application Tapping pipe for branch connections and to install service connections, air and vacuum valves.Key Features
&bullMeets applicable AWWA C800 Standards
&bullThe wide saddle body provides stability on the pipe
&bullThe gasket is fully bonded to the cavity to hold it in place
&bullNPT, CC and other threaded outlets available in sizes " thru 4"&bullA closed lug on one side, combined with the bale, acts as a hinge for easier installation
Qty:
Part #:204850
- 313 Service Saddle, Double Bale - For tapping branch connections on new or existing pipe, installing line appurtenances
Description Double bale Ductile Iron service saddle with TaperSeal&trade gasket and wraparound bales toconnect branch lines, instruments, and other appurtenances to pipe.Application Tapping pipe for branch connections and to install service connections, air and vacuum valves.Key Features
&bullMeets applicable AWWA C800 Standards
&bullThe wide saddle body provides stability on the pipe
&bullThe gasket is fully bonded to the cavity to hold it in place
&bullNPT, CC and other threaded outlets available in sizes " thru 4"&bullA closed lug on one side, combined with the bale, acts as a hinge for easier installation
Qty:
Qty:
Part #:417-44103960350900
Qty:
Displaying: 1 - 12 of 12 Matching Items