4.22in-4.50in
Underground Utility Supplies
View:
Active Filters :
- Main Category: Underground Utility Supplies
- Range: 4.22in-4.50in 4.44in-5.24in 4.80in-5.00in 9.05in-9.40in
Part #:203086
- 229 Full Circle Collar Leak Clamp DI Lug - For repairing leaking PVC solvent weld belled end pipe joints or threaded couplings
DescriptionA tapped clamp to repair damaged pipe at broken or torn out service connections or branch lines.Application Service connection or branch line connections.Key Features
&bullStainless Steel outlet welded to band
&bullSelect from outlets with NPT, CC or BSP (AWWA) threads
&bullRemovable lugs allow installation in tight spaces&bullMaximum support and reinforcement with 360º coverage
&bullDrop-in bolts in the joint to be opened help ease installation
&bull18-8 Type 304 Stainless Steel band for corrosion resistance
&bullA wide variety of outlet sizes and thread types available to meet demand
&bullAll closed lugs on the multi-band, except the joint, which is opened for installation
&bullLugs have a Fusion-Bonded Flexi-Coat® Epoxy Finish for great corrosion resistance
&bullOne starter (longer) bolt minimum per clamp thru 4.5" O.D. size to help with installation
&bullWidths up to 30"
&bullPressure rating up to 175 PSI
Qty:
Part #:200132
- 274 Bell-Joint Leak Clamp Bell Joint Leak Clamps for sealing and repairing bell and spigot joints.
Description Bell Joint Leak Clamp.Application Sealing and/or preventing leaks on Cast Iron bell and spigot caulked or rubber ring joints.Key Features
&bullDesigned to fit both caulked or rubber ring joints in virtually all classes and brands of Cast Iron or DuctileIron pipe within same nominal size
&bullSuitable for use on C900 and C905 PVC through 24" with the use of longer bolts-DR 18 minimum
&bullKee-Lok gasket design eliminates need for field cutting gaskets&mdashthe ends are easily joined&mdashno need ofstaples, tongs, tape or other gadgets to hold the gasket ends together (not available in 14", 30" or 36")
&bullFlexi-Coat® Fusion-Bonded Epoxy finish standard for great corrosion resistance
&bullCan be used to prevent leaking bell gaskets as well as repairing them
&bullCan be installed without interrupting the flow of the pipeline&bullFront and back pieces are interchangable
&bullAll Bell-Spigot pieces are identical, making installation easier
Qty:
Part #:203103
- 441 OMNI Cast Coupling - For joining plain-end pipe of same outside diameters or outside diameters within same nominal pipe size
Description Cast CouplingsApplication To join plain end pipes with the same or different O.D.s by changing followers and gaskets.Key Features&bull Heavy cast Ductile Iron parts for long life&bull Meets applicable AWWA C219 Standards&bull Flanges and gaskets can be mixed and matched on the same size nominal sleeve&bull Most couplings are stab fit, making installation a b eeze. No disassembly is required&bull Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories&bull One sleeve per nominal pipe size takes the guess work out of deciding which sleeve size to choose&bull Flanges are color coded by pipe type Red for iron pipe size O.D. Blue for Ductile O.D. and gray forAsbestos Cement O.D.&bull Gaskets and flanges a e permanently marked with a part number and range to facilitate proper selection&bull Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications
Qty:
Part #:200434
- 622 Tapping Sleeve, Fabricated Steel, Neck Seal - For tapping size-on-size or reducing branch connections on new or existing pipe
Description Tapping sleeve.Application For 4" pipe and larger reducing and size-on-size flanged outlets. Available with ¾"-6"threaded outlets.Key Features
&bullEasy to install&bullHas range to reduce inventory
&bullMeets AWWA C223 Standards&bullEpoxy Finish meets AWWA C213 Standards
&bullVirtually 360º support of the pipe
&bullRoll-resistant gasket will not bind
&bullGasket seal increases with line pressure
&bullNo special tools required to install the sleeve
&bullFlanged outlets are recessed to accept tapping valves
&bullFlexi-Coat® Fusion-Bonded Epoxy Finish is standard for superior corrosion resistance
&bull¾" test outlet to allow hydrostatic pressure test before tapping the pipe (not available in standard 4" x 4")
Qty:
Part #:204941
- 622 Tapping Sleeve, Fabricated Steel, Neck Seal - For tapping size-on-size or reducing branch connections on new or existing pipe
Description Tapping sleeve.Application For 4" pipe and larger reducing and size-on-size flanged outlets. Available with ¾"-6"threaded outlets.Key Features
&bullEasy to install&bullHas range to reduce inventory
&bullMeets AWWA C223 Standards&bullEpoxy Finish meets AWWA C213 Standards
&bullVirtually 360º support of the pipe
&bullRoll-resistant gasket will not bind
&bullGasket seal increases with line pressure
&bullNo special tools required to install the sleeve
&bullFlanged outlets are recessed to accept tapping valves
&bullFlexi-Coat® Fusion-Bonded Epoxy Finish is standard for superior corrosion resistance
&bull¾" test outlet to allow hydrostatic pressure test before tapping the pipe (not available in standard 4" x 4")
Qty:
Part #:202496
- 622 Tapping Sleeve, Fabricated Steel, Neck Seal - For tapping size-on-size or reducing branch connections on new or existing pipe
Description Tapping sleeve.Application For 4" pipe and larger reducing and size-on-size flanged outlets. Available with ¾"-6"threaded outlets.Key Features
&bullEasy to install&bullHas range to reduce inventory
&bullMeets AWWA C223 Standards&bullEpoxy Finish meets AWWA C213 Standards
&bullVirtually 360º support of the pipe
&bullRoll-resistant gasket will not bind
&bullGasket seal increases with line pressure
&bullNo special tools required to install the sleeve
&bullFlanged outlets are recessed to accept tapping valves
&bullFlexi-Coat® Fusion-Bonded Epoxy Finish is standard for superior corrosion resistance
&bull¾" test outlet to allow hydrostatic pressure test before tapping the pipe (not available in standard 4" x 4")
Qty:
Displaying: 1 - 6 of 6 Matching Items