Bell Joint Clamp
Underground Utility Supplies
View:
Active Filters :
- Main Category: Underground Utility Supplies
- Sub Category: Bell Joint Clamp Dresser Coupling Parts IPS Fittings
Part #:204387
- Straight Adaptors ONE END MALE NATIONAL PIPE THREAD -33 PEP-7 x MNPT
A.Y. McDonald Service Fittings are manufactured to meet or exceed the AWWA C800 (latest revision) standard. Our service fittings arerated to withstand the same pressures as the tubing they are designed to fit. They are designed and tested for cold potable water only.EPDM rubber gaskets are used in our Compression fittings.
Qty:
Part #:204386
- Straight Couplings SAME CONNECTIONS ON BOTH ENDS - NO INTERNAL PIPE STOP ON STRAIGHT SIZES -33 PEP-7 x -33 PEP-7
A.Y. McDonald Service Fittings are manufactured to meet or exceed the AWWA C800 (latest revision) standard. Our service fittings arerated to withstand the same pressures as the tubing they are designed to fit. They are designed and tested for cold potable water only.EPDM rubber gaskets are used in our Compression fittings.
Qty:
Part #:204385
- Straight Couplings SAME CONNECTIONS ON BOTH ENDS - NO INTERNAL PIPE STOP ON STRAIGHT SIZES -33 PEP-7 x -33 PEP-7
A.Y. McDonald Service Fittings are manufactured to meet or exceed the AWWA C800 (latest revision) standard. Our service fittings arerated to withstand the same pressures as the tubing they are designed to fit. They are designed and tested for cold potable water only.EPDM rubber gaskets are used in our Compression fittings.
Qty:
Part #:204403
- Tees SAME END CONNECTIONS ON ALL THREE SIDES -22 CTS x -22 CTS x -22 CTS
A.Y. McDonald Service Fittings are manufactured to meet or exceed the AWWA C800 (latest revision) standard. Our service fittings arerated to withstand the same pressures as the tubing they are designed to fit. They are designed and tested for cold potable water only.EPDM rubber gaskets are used in our Compression fittings.
Qty:
Part #:201394
- Straight Adaptors ONE END MALE NATIONAL PIPE THREAD -33 PEP-7 x MNPT
A.Y. McDonald Service Fittings are manufactured to meet or exceed the AWWA C800 (latest revision) standard. Our service fittings arerated to withstand the same pressures as the tubing they are designed to fit. They are designed and tested for cold potable water only.EPDM rubber gaskets are used in our Compression fittings.
Qty:
Qty:
Part #:204390
- Straight Adaptors ONE END MALE NATIONAL PIPE THREAD -33 PEP-7 x MNPT
A.Y. McDonald Service Fittings are manufactured to meet or exceed the AWWA C800 (latest revision) standard. Our service fittings arerated to withstand the same pressures as the tubing they are designed to fit. They are designed and tested for cold potable water only.EPDM rubber gaskets are used in our Compression fittings.
Qty:
Part #:200084
- Tees SAME END CONNECTIONS ON ALL THREE SIDES -33 PEP-7 x -33 PEP-7 x -33 PEP-7
A.Y. McDonald Service Fittings are manufactured to meet or exceed the AWWA C800 (latest revision) standard. Our service fittings arerated to withstand the same pressures as the tubing they are designed to fit. They are designed and tested for cold potable water only.EPDM rubber gaskets are used in our Compression fittings.
Qty:
Part #:200192
- 274 Bell-Joint Leak Clamp Bell Joint Leak Clamps for sealing and repairing bell and spigot joints.
Description Bell Joint Leak Clamp.Application Sealing and/or preventing leaks on Cast Iron bell and spigot caulked or rubber ring joints.Key Features
&bullDesigned to fit both caulked or rubber ring joints in virtually all classes and brands of Cast Iron or DuctileIron pipe within same nominal size
&bullSuitable for use on C900 and C905 PVC through 24" with the use of longer bolts-DR 18 minimum
&bullKee-Lok gasket design eliminates need for field cutting gaskets&mdashthe ends are easily joined&mdashno need ofstaples, tongs, tape or other gadgets to hold the gasket ends together (not available in 14", 30" or 36")
&bullFlexi-Coat® Fusion-Bonded Epoxy finish standard for great corrosion resistance
&bullCan be used to prevent leaking bell gaskets as well as repairing them
&bullCan be installed without interrupting the flow of the pipeline&bullFront and back pieces are interchangable
&bullAll Bell-Spigot pieces are identical, making installation easier
Qty:
Part #:200132
- 274 Bell-Joint Leak Clamp Bell Joint Leak Clamps for sealing and repairing bell and spigot joints.
Description Bell Joint Leak Clamp.Application Sealing and/or preventing leaks on Cast Iron bell and spigot caulked or rubber ring joints.Key Features
&bullDesigned to fit both caulked or rubber ring joints in virtually all classes and brands of Cast Iron or DuctileIron pipe within same nominal size
&bullSuitable for use on C900 and C905 PVC through 24" with the use of longer bolts-DR 18 minimum
&bullKee-Lok gasket design eliminates need for field cutting gaskets&mdashthe ends are easily joined&mdashno need ofstaples, tongs, tape or other gadgets to hold the gasket ends together (not available in 14", 30" or 36")
&bullFlexi-Coat® Fusion-Bonded Epoxy finish standard for great corrosion resistance
&bullCan be used to prevent leaking bell gaskets as well as repairing them
&bullCan be installed without interrupting the flow of the pipeline&bullFront and back pieces are interchangable
&bullAll Bell-Spigot pieces are identical, making installation easier
Qty:
Part #:204840
- 274 Bell-Joint Leak Clamp Bell Joint Leak Clamps for sealing and repairing bell and spigot joints.
Description Bell Joint Leak Clamp.Application Sealing and/or preventing leaks on Cast Iron bell and spigot caulked or rubber ring joints.Key Features
&bullDesigned to fit both caulked or rubber ring joints in virtually all classes and brands of Cast Iron or DuctileIron pipe within same nominal size
&bullSuitable for use on C900 and C905 PVC through 24" with the use of longer bolts-DR 18 minimum
&bullKee-Lok gasket design eliminates need for field cutting gaskets&mdashthe ends are easily joined&mdashno need ofstaples, tongs, tape or other gadgets to hold the gasket ends together (not available in 14", 30" or 36")
&bullFlexi-Coat® Fusion-Bonded Epoxy finish standard for great corrosion resistance
&bullCan be used to prevent leaking bell gaskets as well as repairing them
&bullCan be installed without interrupting the flow of the pipeline&bullFront and back pieces are interchangable
&bullAll Bell-Spigot pieces are identical, making installation easier
Qty:
Part #:204841
- 274 Bell-Joint Leak Clamp Bell Joint Leak Clamps for sealing and repairing bell and spigot joints.
Description Bell Joint Leak Clamp.Application Sealing and/or preventing leaks on Cast Iron bell and spigot caulked or rubber ring joints.Key Features
&bullDesigned to fit both caulked or rubber ring joints in virtually all classes and brands of Cast Iron or DuctileIron pipe within same nominal size
&bullSuitable for use on C900 and C905 PVC through 24" with the use of longer bolts-DR 18 minimum
&bullKee-Lok gasket design eliminates need for field cutting gaskets&mdashthe ends are easily joined&mdashno need ofstaples, tongs, tape or other gadgets to hold the gasket ends together (not available in 14", 30" or 36")
&bullFlexi-Coat® Fusion-Bonded Epoxy finish standard for great corrosion resistance
&bullCan be used to prevent leaking bell gaskets as well as repairing them
&bullCan be installed without interrupting the flow of the pipeline&bullFront and back pieces are interchangable
&bullAll Bell-Spigot pieces are identical, making installation easier
Qty:
Part #:201741
- Tees SAME END CONNECTIONS ON ALL THREE SIDES -33 PEP-7 x -33 PEP-7 x -33 PEP-7
A.Y. McDonald Service Fittings are manufactured to meet or exceed the AWWA C800 (latest revision) standard. Our service fittings arerated to withstand the same pressures as the tubing they are designed to fit. They are designed and tested for cold potable water only.EPDM rubber gaskets are used in our Compression fittings.
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Displaying: 1 - 24 of 33 Matching Items