Flare x IPS Fittings
Underground Utility Supplies
View:
Active Filters :
- Main Category: Underground Utility Supplies
- Sub Category: Flare x IPS Fittings Meter Fittings Service Saddle
Part #:130-5136-114
- SUBMITTAL INFORMATION • Manufactured in compliance with ANSI/AWWA C800 (latest revision)• Brass components in contact with potable water conform to ASTM B584, UNS C89833 (latestrevision) and identified with “NL”• Certified to NSF/ANSI 61 (reference height restrictions)• Brass components not in contact with potable water conform to ASTM B62 and ASTM B584, UNSC83600 -85-5-5-5 (latest revision)• Copper tubing made in complianc• Lead free solder joints• Designed to provide proper meter spacing for ease of installation• Padlock wings standard on all valves:
$
250.00
Qty:
Part #:207113
- Straight 1&rdquo METER SWIVEL FITS 1&rdquo METERS, Meter Swivel x MIP L/wire seal hole 2.63in Length
Meter swivel nuts are less saddle, have internal straight threads per AWWA C700 and include hole for wire seal unless otherwiseindicated. EPDM rubber gaskets are supplied and are standard.(For Meter Dimensions see page 263)
$
37.56
Qty:
Part #:200194
- 372 Service Saddle, All Stainless Steel, Double Bolt - For repairing and restoring damaged branch connections, tapping branch connections on new or existing pipe
Description Stainless Steel service saddle with double bolt specifically designed for PVC pipe, but canbe used on other pipe types.Application Uniform sealing to provide uniform pipe support, without crushing action.Key Features&bullProvides maximum support and reinforcement&bullStandard width is 7½"
&bullAll 304 Stainless Steel construction for great corrosion resistance
&bullOutlet gasket is bonded into the band to provide optimum sealing efficiency
&bullCan be manufactured to odd size pipe O.D.s, not restricted to catalog sizes
&bullA wide variety of outlet sizes and thread types are available to meet demand up to 2"
&bullKeeper bar helps pull clamp around the pipe and helps close the clamp during installation
&bullOne saddle covers both iron pipe size and Ductile Iron O.D. pipe within the same nominal size
&bullOutlet Gasket has a hydro-mechanical lip to improve sealing as the pipeline pressure increases
Qty:
Part #:200195
- 372 Service Saddle, All Stainless Steel, Double Bolt - For repairing and restoring damaged branch connections, tapping branch connections on new or existing pipe
Description Stainless Steel service saddle with double bolt specifically designed for PVC pipe, but canbe used on other pipe types.Application Uniform sealing to provide uniform pipe support, without crushing action.Key Features&bullProvides maximum support and reinforcement&bullStandard width is 7½"
&bullAll 304 Stainless Steel construction for great corrosion resistance
&bullOutlet gasket is bonded into the band to provide optimum sealing efficiency
&bullCan be manufactured to odd size pipe O.D.s, not restricted to catalog sizes
&bullA wide variety of outlet sizes and thread types are available to meet demand up to 2"
&bullKeeper bar helps pull clamp around the pipe and helps close the clamp during installation
&bullOne saddle covers both iron pipe size and Ductile Iron O.D. pipe within the same nominal size
&bullOutlet Gasket has a hydro-mechanical lip to improve sealing as the pipeline pressure increases
Qty:
Part #:200193
- 372 Service Saddle, All Stainless Steel, Double Bolt - For repairing and restoring damaged branch connections, tapping branch connections on new or existing pipe
Description Stainless Steel service saddle with double bolt specifically designed for PVC pipe, but canbe used on other pipe types.Application Uniform sealing to provide uniform pipe support, without crushing action.Key Features&bullProvides maximum support and reinforcement&bullStandard width is 7½"
&bullAll 304 Stainless Steel construction for great corrosion resistance
&bullOutlet gasket is bonded into the band to provide optimum sealing efficiency
&bullCan be manufactured to odd size pipe O.D.s, not restricted to catalog sizes
&bullA wide variety of outlet sizes and thread types are available to meet demand up to 2"
&bullKeeper bar helps pull clamp around the pipe and helps close the clamp during installation
&bullOne saddle covers both iron pipe size and Ductile Iron O.D. pipe within the same nominal size
&bullOutlet Gasket has a hydro-mechanical lip to improve sealing as the pipeline pressure increases
Qty:
Part #:200191
- 372 Service Saddle, All Stainless Steel, Double Bolt - For repairing and restoring damaged branch connections, tapping branch connections on new or existing pipe
Description Stainless Steel service saddle with double bolt specifically designed for PVC pipe, but canbe used on other pipe types.Application Uniform sealing to provide uniform pipe support, without crushing action.Key Features&bullProvides maximum support and reinforcement&bullStandard width is 7½"
&bullAll 304 Stainless Steel construction for great corrosion resistance
&bullOutlet gasket is bonded into the band to provide optimum sealing efficiency
&bullCan be manufactured to odd size pipe O.D.s, not restricted to catalog sizes
&bullA wide variety of outlet sizes and thread types are available to meet demand up to 2"
&bullKeeper bar helps pull clamp around the pipe and helps close the clamp during installation
&bullOne saddle covers both iron pipe size and Ductile Iron O.D. pipe within the same nominal size
&bullOutlet Gasket has a hydro-mechanical lip to improve sealing as the pipeline pressure increases
Qty:
Part #:211455
- Oval Meter Flange 1 1/2&rdquo & 2&rdquo METERS. Meter Flange Kit, Includes 2 each offlanges, gaskets, 4 bolts & 4 nuts
EPDM rubber gaskets are supplied and are standard. Oval meter flanges are faced and drilled per AWWA C700. All 7610 model ovalflanges in 2&rdquo have bolt holes for 2&rdquo meter only unless otherwise indicate
Insert stiffeners are required on all flexible plastic connections, see page 10 for stiffeners.- Stainless steel meter support brackets not included.- Bolt hole diameters on 1 1/2&rdquo oval flange = .72, 2&rdquo oval flange = .81.
$
348.97
Qty:
Part #:203475
- Straight Adaptors ONE END FEMALE COPPER FLARE -33 PEP-7 x Female Flare
A.Y. McDonald Service Fittings are manufactured to meet or exceed the AWWA C800 (latest revision) standard. Our service fittings arerated to withstand the same pressures as the tubing they are designed to fit. They are designed and tested for cold potable water only.EPDM rubber gaskets are used in our Compression fittings.The 74755 series fittings are designed to connect any A.Y. McDonald flare end to a different size or end connection.- Note 4755GSKT copper gasket included with all 74755 connections.
Qty:
Part #:200431
- SUBMITTAL INFORMATION • Manufactured in compliance with ANSI/AWWA C800 (latest revision)• Brass components in contact with potable water conform to ASTM B584, UNS C89833 (latestrevision) and identified with “NL”• Certified to NSF/ANSI 61 and NSF/ANSI 372• Brass components not in contact with potable water conform to ASTM B62 and ASTM B584, UNSC83600 -85-5-5-5 (latest revision)• Large wrench area provided for proper installation:
$
23.05
Qty:
Part #:130-5140-101
- SUBMITTAL INFORMATION • Manufactured in compliance with ANSI/AWWA C800 (latest revision)• Brass components in contact with potable water conform to ASTM B584, UNS C89833 (latestrevision) and identified with “NL”• Certified to NSF/ANSI 61 and NSF/ANSI 372• Brass components not in contact with potable water conform to ASTM B62 and ASTM B584, UNSC83600 -85-5-5-5 (latest revision)• Large wrench flats provided for proper installation• Rated for 100 PSIG water pressure• Insert stiffeners required on all flexible plastic connections:
$
106.58
Qty:
Part #:200121
- Meter Couplings -Straight Meter Couplings - Straight 1-5/8" Length, FNPT x Male Meter Thread
Meter swivel nuts are less saddle, have internal straight threads per AWWA C700 and include hole for wire seal unless otherwiseindicated. EPDM rubber gaskets are supplied and are standard.(For Meter Dimensions see page 263)
$
35.86
Qty:
Part #:203466
- Straight Adaptors ONE END FEMALE COPPER FLARE -33 PEP-7 x Female Flare
A.Y. McDonald Service Fittings are manufactured to meet or exceed the AWWA C800 (latest revision) standard. Our service fittings arerated to withstand the same pressures as the tubing they are designed to fit. They are designed and tested for cold potable water only.EPDM rubber gaskets are used in our Compression fittings.The 74755 series fittings are designed to connect any A.Y. McDonald flare end to a different size or end connection.- Note 4755GSKT copper gasket included with all 74755 connections.
Qty:
Part #:207101
- Meter Couplings - Straight 3/4&rdquo METER SWIVEL FITS 5/8" X 3/4" OR 3/4" METERS Meter Swivel x MNPT Smooth Barrel 2-1/2" Length
Meter swivel nuts are less saddle, have internal straight threads per AWWA C700 and include hole for wire seal unless otherwiseindicated. EPDM rubber gaskets are supplied and are standard.(For Meter Dimensions see page 263)
$
38.70
Qty:
Part #:205634
- Angle Yoke Valves - Plug Style PLUG STYLE - 100 PSI - LOCKWING FOR 1&rdquo METERS
A.Y. McDonald angle yoke plug valves include a meter star nut for connection to iron yoke bars and a wide variety of inlet configurations.These angle valves come standard with 180º &ldquoopen to close&rdquo operating head and are directional with an arrow to indicate the direction of flow.- Insert stiffeners are required on all flexible plastic connections.
$
142.64
Qty:
Part #:130-5123-003
- Meter Couplings -Straight Meter Couplings - Straight 1-5/8" Length, FNPT x Male Meter Thread
Meter swivel nuts are less saddle, have internal straight threads per AWWA C700 and include hole for wire seal unless otherwiseindicated. EPDM rubber gaskets are supplied and are standard.(For Meter Dimensions see page 263)
$
31.33
Qty:
$
101.11
Qty:
Part #:200432
- Meter Bushings Changes thread size only. Converts 5/8&rdquo meter spud to 5/8&rdquo x 3/4&rdquo meter spud .- one bushing, .50 long
Female Meter x Male Meter
$
8.96
Qty:
Part #:130-5124-046
- Angle Yoke Valves - Plug Style,100 PSI - LOCKWING, 3/4" CTS x 5/8"x3/4", or 3/4" Meter
A.Y. McDonald angle yoke plug valves include a meter star nut for connection to iron yoke bars and a wide variety of inlet configurations.These angle valves come standard with 180º &ldquoopen to close&rdquo operating head and are directional with an arrow to indicate the direction of flow.- Insert stiffeners are required on all flexible plastic connections.
$
90.25
Qty:
Part #:130-5139-274
- SUBMITTAL INFORMATION • Manufactured in compliance with ANSI/AWWA C800 (latest revision)• Brass components in contact with potable water conform to ASTM B584, UNS C89833 (latestrevision) and identified with “NL”• Certified to NSF/ANSI 61 and NSF/ANSI 372• Brass components not in contact with potable water conform to ASTM B62 and ASTM B584, UNSC83600 -85-5-5-5 (latest revision)• Large wrench flats provided for proper installation:
$
90.24
Qty:
Displaying: 1 - 19 of 19 Matching Items