1/2 in
1-1/4in
Part #:100423
- Aqua Jet I.D. Controlled PE-4710:
$
0.92
Qty:
Qty:
Part #:302655
- Appleton and O-Z/Gedney offer ETP 5000S Series steel EMT set screw couplings. They are used to ground and secure EMT raceway sections together
$
3.18
Qty:
Part #:302735
- Appleton EY 25% fill vertical and horizontal conduit sealing fittings prevent the passage of gases vapors or flames from one portion of a conduit system to another. They also restrict large amounts of ignitable gases or vapors from accumulating to confine explosive pressure. Appleton sealing fittings are explosionproof dust-ignitionproof and raintight. They are suitable for use in Class I and II locations.
$
55.45
Qty:
Part #:305735
- Appleton and O-Z/Gedney Hang-On hangers are designed secure rigid metal conduit IMC or EMT to threaded rod supports or directly to mounting surfaces.
$
1.76
Qty:
Part #:307122
- O-Z/Gedney threaded three piece couplings join two lengths of conduit when neither can be turned. Elbows provide a 90 change of direction in a conduit run. Gasket elbows also provide a compact wire pulling point.
$
26.95
Qty:
Part #:307975
- Appleton liquidtight STF Series connectors with threaded hubs are female ST Series connectors. They are designed to be used when making connection from liquidtight flexible metal conduit to threaded rigid conduit and IMC. The compact design results in a connector that offers a small turning radius.
$
24.89
Qty:
Part #:308001
- Appleton aluminum liquidtight ST Series connectors with plain throat provide a dependable connection for liquidtight flexible metal conduit. Their lightweight aluminum construction facilitates installation. The compact design results in a connector that offers a small turning radius. They seal out oil water dust dirt and fumes.
$
49.23
Qty:
$
3.38
Qty:
Part #:501574
- 4200 Pro Series 1 1/4" Stiff Putty Knife
The 4200 Professional Series of quality putty knives, wall scrapers, and taping knives. Black nylon solvent-resistant handle is designed for maximum safety and dependability. High-carbon, precision-ground steel blade is lacquered to prevent rust and extends through handle. The brass-plated, solid steel nail setting head can be used for setting drywall nails and other hammering jobs.
$
4.43
Qty:
Part #:504286
- Industrial Knit Firesleeve
Pyrotex Industrial Knit Firesleeve is a self-extinguishing thermal protection sleeve renowned for its ability to instantly shed molten material and resist direct flame impingement- ideal for use in industrial and foundry applications. Pyrotex Knit Firesleeve is a lightweight, expandable, and flexible composite sleeve which will not melt, burn, support combustion, or emit toxic smoke. Industrial-grade Pyrotex Knit Firesleeve is manufactured with a highly texturized E-glass insulating substrate and coated with Atlantex&rsquos high-temperature, fire-resistant Silicone coating.
Pyrotex Knit Firesleeve provides reliable system protection across a wide range of industries and applications. By minimizing thermal hazards and insulating lines, Pyrotex Firesleeve extends the service life of lines, increases uptime and efficiency, and provides personnel protection. Pyrotex Firesleeve is available in many colored coatings and can be custom printed for private brand development or line identification.
$
5.29
Qty:
Part #:505942
-
1/2" Grade 30 Proof Coil Chain, Zinc Plated, 40' per Round Pail
Excellent Low Carbon Steel Chain for General Purpose Applications
Frequently Used for Fabricating Tow Chains, Binding and Logging Chains, Marine and Other General Applications
Standard Finish Zinc Plated or Galvanized
Hallmarking "C3" and "USA" on 5/16" and Larger
Proof Tested
Design Factor 4 to 1
Packaged in Pails, Order Unit is "Each"
Made in the USA
Do Not Use for Overhead Lifting
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:509873
- Industrial Knit Firesleeve
Pyrotex Industrial Knit Firesleeve is a self-extinguishing thermal protection sleeve renowned for its ability to instantly shed molten material and resist direct flame impingement- ideal for use in industrial and foundry applications. Pyrotex Knit Firesleeve is a lightweight, expandable, and flexible composite sleeve which will not melt, burn, support combustion, or emit toxic smoke. Industrial-grade Pyrotex Knit Firesleeve is manufactured with a highly texturized E-glass insulating substrate and coated with Atlantex&rsquos high-temperature, fire-resistant Silicone coating.
Pyrotex Knit Firesleeve provides reliable system protection across a wide range of industries and applications. By minimizing thermal hazards and insulating lines, Pyrotex Firesleeve extends the service life of lines, increases uptime and efficiency, and provides personnel protection. Pyrotex Firesleeve is available in many colored coatings and can be custom printed for private brand development or line identification.
$
5.29
Qty:
closeout
$30.03 MSRP
$
17.63
Part #:511866
- CLOSEOUTS Only 6 Left!
-
1/2" Clevis Grab Hook, Forged Steel, Self Colored
Material is Drop-Forged Carbon Steel (Grade 30 & 43) or Heat-Treated Alloy Steel
Grade 30 & 43 Hooks Available Self-Colored or Zinc-Plated
Alloy Hooks Are Painted Orange and Stamped &rdquoAlloy&rdquo 3.5 to 1 Design Factor
Alloy Hook Sizes 1/4" to 3/8" are Supplied Individually Bagged and Unassembled
Self-Colored Finish Hooks Are Bulk Packed, Zinc Plated Hooks Are Packed 10 Per Box
Grab Hooks Are Designed to Grab a Chain Link and Hold it in Place
Hooks are Sized by the Material Diameter of the Chain That They Engage. Make Sure the Hook Size and Chain Diameter are Compatible Before Attaching to Load
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:511895
-
1/2" Anchor Shackle, Screw Pin, Forged Carbon Steel, Painted Blue
Shackle Bodies Are Drop-Forged Carbon Steel
Self Colored (Painted Blue)
C-419-S Shackles Meet the Design Requirements of Federal Specification RR-C-271, Type IVA, Grade A, Class 2
Working Load Limit, Size, Manufacture Name, Date Code and USA Permanently Marked on Each Shackle
Statistically Tested for Impact Resistance, Tensile Strength, Hardness, Ductility and Fatigue
419 Series Shackles Meet or Exceed All Manufacturing Requirements of the ASME B30.26 &rdquoRigging Hardware&rdquo. These Include the Material Ductility Requirement (Section 26-1.1.2), the Design Factor Requirement (Section 26.1.2), the Identification Requirement (Section 26-1.5.1), and the Effective Temperature Range (Section 26-1.6.1). the Shackles Can Be Proof Tested in Accordance with Section 26-1.4
Certification Available Upon Request
6 to 1 Design Factor
Pins and Bolts Are Heat-Treated and Made of Alloy Steel
Qty:
Qty:
Qty:
Part #:701133
- 1-1/4in Jamesbury 9F Series/Eliminator 2000 Fire-Tite Threaded Ball Valve. Carbon steel body with stainless steel ball and stem. Jamesbury Xtreme seats with TFM seals. Non-ANSI Class Jamesbury Part # MA00103779FB2236XTB
Qty:
Qty:
Qty:
Part #:702802
- 1-1/4in Jamesbury Clincher Series 2000 2-Piece Threaded Ball Valve. Brass body with brass ball and stem. Seats and seals are PTFE. Assembled dry, no silicone. Jamesbury Part # MA0016848 211100TTC061
Qty:
Qty:
Displaying: 1 - 24 of 448 Matching Items