16in
2-7/16in
$
1.27
FT
Qty:
$
1.79
FT
Qty:
$
1.75
FT
Qty:
$
60.26
Qty:
Part #:504747
- A 100% pure PTFE joint sealant used in virtually any gasketing applications. Adhesive backing allows for easy installation and material is soft and flexible so it handles curves and contours.
Installation takes only minutes and removal of the sealant is simple and involves no scraping or grinding. It is sold in continuous lengths so that it can be cut off in various lengths.
$
49.58
Qty:
Part #:506827
- Rubber Vinyl Garden Hose Attributes
Weight
7.75 lb
Size
5/8" x 50"
Material
Rubber & Vinyl
Color
Green
Working Pressure
400 PSI
Temperature Range
0°F to 140°F (-17.8°C to 60°C)
$
59.55
Qty:
Qty:
Part #:506832
- Contractors EPDM Water Hose Attributes
Weight
16.35 lb
Size
3/4" x 50"
Material
EPDM
Color
Black
Working Pressure
150 PSI
Temperature Range
-20°F to 180°F (-29°C to 82°C)
$
154.63
Qty:
Qty:
Part #:202770
- Superior Double Jacket Municipal Fire Hose800 PSI Test Pressure
Our 800 PSIG test all polyester double jacketed EPDM rubber lined fire hose is ideal for high-rise backpacks as well as other municipal firefighting applications. Designed for lightest weight with maximum strength, it meets NFPA requirements for attack, relay and supply line hoses. Available with our Steadfast Coating. Colors Orange, Red, Blue, Yellow, Green, Black, Tan, Brown and Purple
Available in 50, 75, and 100 foot lengths
$
4.27
Qty:
Part #:503696
- 1/4" Shank Diameter Eyebolts Shoulder Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially. A steel washer or spacer may be required for proper seating
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
Qty:
$
0.99
FT
Qty:
$
2.66
FT
Qty:
Part #:506505
- Floor Stripe&trade High Performance Message Marking Tapes Identify and call attention to hazards throughout your facility. Printed 1-mil polyester tapes have 1-mil gloss over-laminate. Acrylic adhesive backing provides high tack and bond to a variety of smooth and rough surfaces. Available 3" wide x 50-ft. roll. Tapes can be custom printed with your message, graphic, or logo. Contact us with part number PTP155.
Part #:503205
- Spline Bit 2-Cutter 1/2" x 16"
Milwaukee®'s Spline 2-Cutter Rotary Hammer drill bits are used for drilling intro brick, block, and concrete
Qty:
Part #:500551
- 3/4" Drive Extensions
&bull Chrome plating provides increased protection from rust and corrosion
&bull Ball and spring socket retention
Qty:
Qty:
Qty:
Qty:
Part #:503254
- Spline Bit 2-Cutter 1-1/8" x 16"
Milwaukee®'s Spline 2-Cutter Rotary Hammer drill bits are used for drilling intro brick, block, and concrete
Qty:
Part #:503256
- Spline Bit 2-Cutter 1-1/4" x 16"
Qty:
Part #:505115
- 1/2" x 50' Atlas® Chrome Clad® Oil Gauging Tape
Crescent Lufkin® offers a wide range of gauging tapes designed for a variety of measuring applications. With their reliable design and ease of use, Crescent Lufkin gauging tapes have withstood the test of time and proven why they are the best in the industry.
Qty:
Displaying: 1 - 24 of 55 Matching Items