16in
2-7/16in
Qty:
Part #:507581
- SUPERFLEX ROLL
The difference between SUPERFLEX and other shop rolls is the cloth backing. This enables SUPERFLEX to be stretched and twisted without fear of snapping or cracking. Each roll is triple flexed to provide the user with the highest degree of flexibility possible with a coated abrasive cloth. Applications include machine shops, tool & die, aviation maintenance, plumbing and general cleaning and degreasing of parts.
$
28.32
Qty:
Qty:
Part #:503696
- 1/4" Shank Diameter Eyebolts Shoulder Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially. A steel washer or spacer may be required for proper seating
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
Qty:
Part #:506512
-
Specifications
Abrasive Material
Aluminum Oxide
Applications
Deburring
Body Material
Cloth
Brand
CARBORUNDUM
Country of Origin
FR
Grit
P80
Hazmat
NO
Height [Nom]
2.6 in
Length [Nom]
50 yd
Quantity
1 per pack
Type
Rolls
Width [Nom]
2 in
Wt.
3.45 lb
Qty:
Part #:507575
- Item # R5690, Cleaning & Finishing Roll
Premium closed coat aluminum oxide grain, resin bonded to flexible cloth.
50-yard rolls packaged in convenient, see-through boxes for easy dispensing.
A40Flexovit shop rolls are intended for general purpose deburring, cleaning, polishing and fine finishing of metal surfaces. They are usable dry, or with water and water-based coolants.
Qty:
Part #:503205
- Spline Bit 2-Cutter 1/2" x 16"
Milwaukee®'s Spline 2-Cutter Rotary Hammer drill bits are used for drilling intro brick, block, and concrete
Qty:
Part #:500551
- 3/4" Drive Extensions
&bull Chrome plating provides increased protection from rust and corrosion
&bull Ball and spring socket retention
Qty:
Qty:
Part #:800614
- RESIN BOND SHOP ROLL (Replaces 481-05539529349)
Durable Aluminum Oxide Grain coated to a flexible &ldquoJ&rdquo wt. Cloth backing that tears easily and conforms to the workpiece. Resin Bonding System enables material to be used dry or in conjunction with oil, cutting fluids and lubricants. Water Resistant!
$
29.99
RL
Qty:
Qty:
Qty:
Part #:503254
- Spline Bit 2-Cutter 1-1/8" x 16"
Milwaukee®'s Spline 2-Cutter Rotary Hammer drill bits are used for drilling intro brick, block, and concrete
Qty:
Part #:503256
- Spline Bit 2-Cutter 1-1/4" x 16"
Qty:
Qty:
Qty:
Part #:501513
- Country of Origin US:
Qty:
Qty:
Part #:503210
- Spline Bit 2-Cutter 5/8" x 16"
Milwaukee®'s Spline 2-Cutter Rotary Hammer drill bits are used for drilling intro brick, block, and concrete
Qty:
Part #:503234
- Spline Bit 2-Cutter 1" x 16"
Milwaukee®'s Spline 2-Cutter Rotary Hammer drill bits are used for drilling intro brick, block, and concrete
Qty:
Qty:
Part #:503914
- 1" Drive Extension 16"
&bull Chrome plating provides increased protection from rust and corrosion
&bull Ball and spring socket retention
&bull Hole in wall of drive end accommodates plunger for firm tool retention
Qty:
Part #:503590
- 16" Long Taper Punches
Designed for aligning the holes in metal pieces through which rivets, bolts, or screws will be inserted
Not intended for driving pins as punch may become stuck in work
Also called line-up aligning or drift punches
Qty:
Displaying: 1 - 24 of 36 Matching Items