Pass & Seymour/legrand
Accuform


Displaying: 1 - 24 of 72 Matching Items
72 Items
View:
Active Filters :
Part #:303050

Lock out machinery and inform readers not to operate the related device. Properly lock out equipment and machinery in the workplace or facility to ensure safety of all personnel Traditional OSHA-style signs, tags and labels are the most widely recognized design format in the industry Danger header indicates a hazardous situation that, if not avoided, will result in death or serious injury
$19.96 MSRP $ 15.75 PACK
Part #:506505

Floor Stripe&trade High Performance Message Marking Tapes Identify and call attention to hazards throughout your facility. Printed 1-mil polyester tapes have 1-mil gloss over-laminate. Acrylic adhesive backing provides high tack and bond to a variety of smooth and rough surfaces. Available 3" wide x 50-ft. roll. Tapes can be custom printed with your message, graphic, or logo. Contact us with part number PTP155.
$33.75 MSRP $ 29.12 RL
RL
Part #:806845

Clearly mark an exit in your warehouse, office, or facility. Clearly marked exits can make evacuating in an emergency easier. Material Details Plastic with protected surface coating (see details above) Impact resistant with slight flexibility Service temperature range -90&degF to 168&deg Lightweight indoor/outdoor use Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes Recycle code 6
$ 13.60
Part #:506257

Holds tight onto circuit breaker for a secure and solid lockout to avoid hazards. Easily applied by standard flathead screwdriver Red octagon shape reinforces lockout status Fits most 120/240 circuit breakers Accommodates up to 9/32-inch diameter padlock shackles (sold separately) Single pole 13/16-inch W x 3-inch L x 3/4-inch H
$6.60 MSRP $ 5.60
Part #:5020-CXB631

Block access to a confined space, while indicating a permit only entry. Use the crossbucks to physically block the entryway of a confined space Restrict access by posting permit only entry Traditional OSHA-style signs, tags and labels are the most widely recognized design format in the industry Danger header indicates a hazardous situation that, if not avoided, will result in death or serious injury Selected Material Details Manufactured with 50% Post-Consumer Recycled plastic and is recyclable &ndash code 2 Polyethylene plastic with matte surface Impact resistant with slight flexibility Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes Service temperature range -90&degF to 168&deg
$132.44 MSRP $ 110.92
$19.18 MSRP $ 12.75
$14.28 MSRP $ 9.50
Part #:829-3796

Outdoor Heavy Cast Aluminum Multigang Cover, Gray Heavy-duty die-cast aluminum covers and plate. 3/32 inch gasket included. Stainless steel mounting screws.
$96.68 MSRP $ 51.43
Part #:829-3830

Power Outlets cULus ListingNumber 140596
$28.98 MSRP $ 17.34
Part #:829-FCSD40

Support Grips Service and Bus Drop Service drop grips provide support for utility distribution lines from service pole to building or from pole to pole. They can also be used for cable TV and fiber optic cable support. They are woven from tinned bronze wire to provide superior corrosion resistance, and are available in single eye and locking bale configurations.
$23.14 MSRP $ 18.46
Part #:829-CR6300

Industrial Extra Heavy Duty Spec Grade Receptacles, Corrosion-Resistant, Back and Side Wire, 20A, 125V, Yellow One-piece brass mounting strap with integral ground. Strap tabs wrap around and lock down on face to prevent strap from separating from face and back body. Two drive screws anchor strap to back body and face. Exclusive patented feature, circuit label on face allows permanent circuit identification. .036 inch thick, brass, triple-wipe power contacts for lasting retention. Easily accessed break-off, line-contact connecting tab for fast, easy split-circuit wiring. Impact-resistant nylon face and back body. Oversized #10 deep tri-drive head brass terminal and ground screws. Exclusive patented feature, external screw-pressure-plate back wire clamp on ground terminal for faster, easier installation. External screw-pressure-plate back wire clamps with #10 brass terminal screws for visual assurance of a good connection. Line terminals accept #14 -- #10 AWG stranded or solid copper clad conductors. Auto-ground clip assures positive ground. Corrosion-resistant models have nickel-plated straps and contacts. For covering patents, see www.legrand.us/patents. For compatible wall plate options, from our TradeMaster unbreakable plates to our radiant screwless plates to our metal wall plates, click here. cULus ListingNumber 140596
$101.94 MSRP $ 50.85
Part #:829-CS6365

California Standard Plug Product Line Pass &amp Seymour Color Black UPC Number 785007636505 Country Of Origin Mexico Application Sector Industrial Standard UL 498
$137.84 MSRP $ 128.29
Part #:829-FC150U

Support Grips Standard Duty, Closed Mesh Standard closed mesh support grips are designed for loads up to 600 lbs. Vertical runs of no more than 100 ft. They are available in a variety of eye styles and cable ranges for supporting electrical and fiber optic cable, metal rods, and tubing. Closed mesh support grips are used when the end of the cable is accessible. Support grips are woven of corrosion-resistant tinned-bronze wire. Most Flexcor products have UL and/or CSA approvals. Please contact factory for approval information. CSA File Number 67507
$76.62 MSRP $ 61.13
Part #:5020-PRC202RD

Set up a barrier quickly and economically with plastic chain and stanchion posts. Use these chain links to corral or direct pedestrian traffic Also can be used to designate an area that should not be entered Lightweight, yet remarkably strong, polyethylene plastic Available in solid colors and alternating color chain that changes color every two feet Chain can be cut to your required length (maximum continuous length is 500 feet)
$ 0.88 FT
Part #:829-3802

Power Outlets cULus ListingNumber 140596
$0.43 MSRP $ 0.21
 
Displaying: 1 - 24 of 72 Matching Items