Pennunion Corp
Accuform
View:
Active Filters :
- Brand: Accuform Pennunion Corp
Part #:309911
- Copper Mechanical Lug - One Hole Offset Tongue 8 Sol. to 2 Str. CU
$
1.31
Qty:
Part #:303050
- Lock out machinery and inform readers not to operate the related device.
Properly lock out equipment and machinery in the workplace or facility to ensure safety of all personnel
Traditional OSHA-style signs, tags and labels are the most widely recognized design format in the industry
Danger header indicates a hazardous situation that, if not avoided, will result in death or serious injury
Qty:
Part #:309877
- Copper Split Bolt Connector for Two Copper Conductors - 16 Str. to 8 Str. (Equal Main & Tap)
Qty:
Part #:309890
- Copper Split Bolt Connector for Two Copper Conductors - 2 Sol. to 2/0 Str. (Equal Main & Tap)
$
6.59
Qty:
Part #:309891
- Copper Split Bolt Connector for Two Copper Conductors - 2 Sol to 3/0 Str. (Equal Main & Tap)
$
8.96
Qty:
Part #:309892
- Copper Split Bolt Connector for Two Copper Conductors - 1/0 Sol. to 250 kcmil (Equal Main & Tap)
$
10.49
Qty:
Part #:309893
- Copper Split Bolt Connector for Two Copper Conductors - 4/0 Str. to 350 kcmil (Equal Main & Tap)
$
19.37
Qty:
Part #:309942
- Copper Compression Lug - Standard Barrel, One Hole Tongue with Inspection Window 4 AWG
$
0.89
Qty:
Part #:309943
- Copper Compression Lug - Standard Barrel, One Hole Tongue with Inspection Window 4 AWG
$
1.66
Qty:
Part #:309944
- Copper Compression Lug - Standard Barrel, One Hole Tongue with Inspection Window 2 AWG
$
1.71
Qty:
Part #:309945
- Copper Compression Lug - Standard Barrel, One Hole Tongue with Inspection Window 2 AWG
$
1.71
Qty:
Part #:309946
- Copper Compression Lug - Standard Barrel, One Hole Tongue with Inspection Window 2 AWG
$
1.71
Qty:
Part #:309950
- Copper Compression Lug - Standard Barrel, One Hole Tongue with Inspection Window 1/0 AWG
$
1.92
Qty:
Part #:309951
- Copper Compression Lug - Standard Barrel, One Hole Tongue with Inspection Window 1/0 AWG
$
1.92
Qty:
Part #:309952
- Copper Compression Lug - Standard Barrel, One Hole Tongue with Inspection Window 2/0 AWG
$
2.25
Qty:
Part #:506505
- Floor Stripe&trade High Performance Message Marking Tapes Identify and call attention to hazards throughout your facility. Printed 1-mil polyester tapes have 1-mil gloss over-laminate. Acrylic adhesive backing provides high tack and bond to a variety of smooth and rough surfaces. Available 3" wide x 50-ft. roll. Tapes can be custom printed with your message, graphic, or logo. Contact us with part number PTP155.
Part #:806845
- Clearly mark an exit in your warehouse, office, or facility. Clearly marked exits can make evacuating in an emergency easier.
Material Details
Plastic with protected surface coating (see details above)
Impact resistant with slight flexibility
Service temperature range -90°F to 168°
Lightweight indoor/outdoor use
Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes
Recycle code 6
$
13.60
Qty:
Part #:300122
- BCUA-4 - Aluminum Penn-Crimps® Splice
For copper or aluminum stranded wire
Seamless, one piece pure aluminum construction.
Tin plating assures maximum conductivity.
Generous entrance chamfer provides easy cable insertion.
The barrels are filled with Cual-Aid® and capped at factory to eliminate the need for separate application of oxide inhibitor to the conductor. Wire brushing of aluminum conductor is required. This assures a stable cool running joint.
Positive cable stops insure proper insertion
Catalog number and conductor size marked on every piece insures positve identification. Can be installed with existing crimping tools. Color coding conforms to industry requirements to insure proper connector/die selection and to provide for faster installation
BCUA LUGS ARE SUITABLE FOR USE AT VOLTAGES UP TO 35 KV provided connector is taped in accordance with accepted practices. 5KV is maximum voltage level in all bare splice applications.
EPDM rubber underground submersible cover available - see catlaog number SSI-500
Concentric, compressed and compact stranding
ConductorType
Conductor Range
Wire Diameter (in.)
Aluminum or Copper
4 Str.
.232
Qty:
closeout
$
38.42
Qty:
Part #:303636
-
Hand-Operated Dieless Mechanical Compression Tool - 8 AWG to 500 kcmil AL & CU
Qty:
Qty:
Qty:
Part #:304820
- Aluminum Service Wedge Clamp #6 to #2 ACSR #6 to #1 AAC #6 to #2 AAAC
$
11.04
Qty:
Part #:305362
- Aluminum Compression Splice - Standard Barrel 2/0 AWG
Qty:
Displaying: 1 - 24 of 72 Matching Items