Dykem
Adhesives, Sealants, and Tapes
View:
Active Filters :
- Main Category: Adhesives, Sealants, and Tapes
- Brand: Dykem Hilti Loctite Rust-Oleum
Part #:511262
-
HDM Manual adhesive dispenser Manual dispenser HDM 500 + black cartr #3498241
Manual hybrid/epoxy adhesive anchor dispenser
Dispenser typeManual
$
307.12
Qty:
Part #:511332
-
HIT-RE 500 V3 Epoxy anchor Epoxy adh RE 500-V3 11.1oz/330ml #2123401 Base materialsConcrete (cracked), Concrete (uncracked)Base material conditionDry, Submerged, Water-filled, WetApprovals / Test reportsICC-ES report (concrete)Seismic loadingYesPROFIS SoftwareYesClean-TecNoCleaning proceduresAutomatic Cleaning (SafeSet Hollow Drill Bit), Compressed-Air CleaningStorage and transportation temperature range41 - 77 °FIn-service temperature &ndash range-40 - 158 °FShelf life from date of manufacture (at 73°F/23°C and 50% relative humidity)12 monthsProduct informationThis product is subject to the Chemicals Prohibition Ordinance (ChemVerbotsV). It is to be used by professionals within the scope of their work and, in accordance with § 8 para. 3 no. 1 of the ChemVerbotsV, is to be used exclusively for its intended purpose as anchor adhesive, for rebar connections (typically steel-to-concrete and/or concrete-to-concrete connections), as well as for other intended fastening and uses within the scope of construction activities. Purchasers must comply with all existing legal requirements for the use of these products and may use them only as permitted. Information in the safety data sheets and operating instructions on the use of these products, the hazards associated with their use, the necessary safety measures during intended use and in the event of unforeseen spillage or release, and proper disposal must always be observed. The operating instructions and safety data sheets can be accessed in the detailed view of the products concerned at www.hilti.de in a format that can be saved and printed, and the operating instructions are enclosed with the products. Safety instructions Wear protective gloves/protective clothing/eye protection/face protection. Do not get in eyes, on skin or on clothing. In case of contact with eyes rinse thoroughly with water for several minutes. Remove contact lenses if possible, continue rinsing. If eye irritation, skin irritation or rash persist seek medical advice/attention. In case of contact with skin wash with plenty of soap and water. Disposal Completely emptied cartridges can be disposed of via the Dual System (yellow garbage can). Full/partially emptied containers are to be disposed of as special waste.Product ClassUltimate
$
85.86
Qty:
Part #:511731
-
HDM Manual adhesive dispenser Manual dispenser HDM 500 + red cartr #3498242
Manual hybrid/epoxy adhesive anchor dispenser
Dispenser typeManual
$
307.12
Qty:
$
47.15
Qty:
Part #:511740
-
Cartridge holder red HIT-CR 500 #2007059
$
48.09
Qty:
Part #:500993
- Makes replacement, high performance O-rings in less than a minute. This compact kit contains four 3-foot lengths of common diameters of Buna N (nitrile) cord, LOCTITE® 404® Quick Set&trade Instant Adhesive, O-ring fixture, blade, a waterproofing solution, and a cleanup solution. Cut and splice tool and standard size cord stock are available. Included Cord Sizes 3/32 in., 1/8 in., 3/16 in., 1/4 in.
1 oz. waterproofing solution
# 74126 1 oz. cleanup solvent,
# 75326 1/3 oz. 404® Quick Set&trade instant adhesive,
# 46551 Fixture and cutting blade
98613 Precision O-Ring Cut & Splice Tool
8900591 O-Ring Stock, Buna N, 1/4 in. x 3 ft.
8900589 O-Ring Stock, Buna N, 1/8 in. x 3 ft.
8900588 O-Ring Stock, Buna N, 3/32 in. x 3 ft.
8900590 O-Ring Stock, Buna N, 3/16 in. x 3 ft.
Qty:
Part #:507247
- Technical Information
Agency Approvals / Specifications
UL
Application Method
Dispense System, Manual
Applications
Pipe Sealing, Thread Sealing
Breakaway Torque, Steel M10
12.0 N·m (110.0 in./lb. )
Color
White Off White
Cure Type
Anaerobic Cure
Key Characteristics
Immediate Low Pressure Sealing, Oil Tolerant, Strength Low Strength, Temperature High Temperature, Thixotropic
Operating Temperature
-55.0 - 200.0 °C (-65.0 - 400.0 °F )
Physical Form
Paste
Substrates
Metal, Metal Aluminum, Metal Steel - Galvanized Steel, Metal Steel - Stainless Steel, Thread Type Coarse, Thread Type Tapered
Technology
Acrylic
Viscosity, 20 RPM
540000.0 mPa·s
$
100.98
Qty:
Part #:506000
- Technical Specs Item Gasket Sealant Type Slow Dry Flexible Cure Size 7 oz Color Black Temp. Range -65F to 400 Degrees F Specific Gravity 1.5 Viscosity Paste Full Cure Remains Tacky Begins to Harden 4 hr Substrates Excellent for Sealing Flexible Metal to Metal Assemblies Characteristics Oil Resistant Application Cover Plates, Hose Connections, Valve Cover and Oil Pan Gaskets
$
15.20
Qty:
Part #:508141
- Technical Specs Item Instant Adhesive Materials Bonded Metal, Plastic Begins to Harden - Adhesives 15 sec Viscosity - Adhesives 150 to 450 cPs Container Type - Adhesives Tube Container Size - Adhesives 3 g Adhesive Color Clear Series 454 Gap Fill 0.01 in Functional Cure Not Specified Full Cure 24 hr Temp. Range -65 Degrees to 250 Degrees F Specific Gravity 1.05 Chemical Type Cyanoacrylate VOC Content 20g/L Characteristics General purpose, bonds a variety of porous surfaces Tensile Strength 3200 psi Standards 29 CFR 1910.1200 Application For Difficult to Bond Surfaces, Irregular Rough and Acidic Surfaces, Use on Porous Substrates
$
8.22
Qty:
Part #:521246
- Technical Specs Item Instant Adhesive Materials Bonded Metal, Plastic, Rubber Begins to Harden - Adhesives 15 sec Viscosity - Adhesives 90 cPs Container Type - Adhesives Bottle Container Size - Adhesives 20 g Adhesive Color Clear Series 401 Gap Fill 0.005 in Functional Cure Not Specified Full Cure 24 hr Temp. Range -65 Degrees to 250 Degrees F Specific Gravity 1.05 Chemical Type Cyanoacrylate VOC Content 20g/L Characteristics Resealable Squeeze Package Tensile Strength 3200 psi Standards 29 CFR 1910.1200, CFIA Application Bonds A Wide Range Of Materials Including Metals, Plastics, and Elastomers
$
30.19
Qty:
Part #:521020
- Product details Legacy part 51005 10 oz Brush Top Can Exclusive Formula Suspends Copper and Graphite in a High-Quality Grease Protects Metal Parts From Corrosion, Galling and Seizing at Temps to 1800 °F Use On Metals, Plastics and Non-Metallic Gaskets description Exclusive formula suspends copper and graphite in a high-quality grease. applications Electrically conductive Aluminum Soft metals features Protects metal from rust and corrosion Resists seizing and galling Temperatures to 1,800 F (982 C) CARB Complies with VOC regulations as detailed by the California Air Resource Board OTC Complies with VOC regulations as detailed by the Ozone Transport Commission Mil-PRF907-F CFIA approved Equipment associated with petroleum chemicals, steel mills, paper plants, marine and foundries
$
31.92
Qty:
Part #:521212
- Technical Specs Item Pipe Thread Sealant Size 50 mL Container Type Tube Chemical Type Dimethacrylate Ester Strength Medium Color White Gas Pressure Range 10,000 psi Begins to Harden 24 hr Application Temp. Range 72 Degrees F Performance Temp. Range -65 Degrees to 400 Degrees F Flash Point 199.94 Degrees F Specific Gravity 1.21 @ 25 Degrees C Viscosity 350,000cP For Use With NF Application Thread sealing
$
24.92
Qty:
Part #:516691
- Technical Specs
Patching Application Mortars and Patching Cements Item Flooring/Grouting Concrete Repair Color Gray Number of Components 2 Container Size 1 gal Container Style Pail Coverage 4.8 sq ft VOC Less Than 1.0%, 10g/L Flash Point Greater Than 212 Degrees F Starts to Harden Not Specified Full Cure Time Not Specified For Use On Surface Material Concrete, Glass, Steel, Wood Application 000 PSI, Chemically Resistant, Compressive Strength 13, Rapid Setting, Summer and Winter Additives Also Available to Aid Cure Times Characteristics 2-Part, Rapid Set Time Meets OSHA Cured Color Family Grays
Qty:
Part #:504526
- Technical Specs Item RTV Silicone Sealant Type Shrink-Resistant for Precut Gaskets Size 300 mL Color Blue Temp. Range -65 to 500 Degrees F Specific Gravity 1.04 Flash Point 199.4 Degrees F Full Cure 24 hr Begins to Harden 10 min Application Coat Pre-cut Gaskets for Increased Reliability
Qty:
Part #:507497
- Technical Specs Item RTV Silicone Sealant Type High Temp. Size 80 mL Color Red Temp. Range -75 to 600 Degrees F Specific Gravity 1.01 Flash Point 199.4 Degrees F Full Cure 24 hr Begins to Harden 10 min Application Coat Pre-cut Gaskets for Increased Reliability
Qty:
Part #:505834
- Technical Specs
Item RTV Silicone Sealant Type High Temp. Size 300 mL Color Red Temp. Range -75 to 600 Degrees F Specific Gravity 1.01 Flash Point 199.4 Degrees F Full Cure 24 hr Begins to Harden Not Specified Application Fills Gaps to 0.25 in Between Parts that are Mated
$
50.09
Qty:
$
26.89
Qty:
Part #:503330
- Technical Specs Item Threadlocker Threadlocker Classification Threadlocker Threadlocker Strength Medium Threadlocker Color Blue Threadlocker Disassembly Removable Physical Form Liquid Threadlocker Container Bottle Size 10 mL Chemical Type Anaerobic For Fastener Dia. 1/4 in to 3/4 in Begins to Harden 5 min Series 242 Gap Fill 0.005 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Greater Than 93.3 Degrees C Specific Gravity 1.1 Viscosity 1,200 to 5,000 cP Removable With Hand Tools Application Locking Nuts and Bolts 1/4 in to 3/4 in . Removable With Hand Tools. Standards ASTM-D5363 Group 3 Class 2 Grade 1, CFIA, MIL-S-46163A Type II Grade N, NSF P1, OSHA Hazard Communication, RoHS Compliant Green Certification or Other Recognition NSF(R) Certified (Sustainability or Environmental Standard) Technical Specs Item Threadlocker Threadlocker Classification Threadlocker Threadlocker Strength Medium Threadlocker Color Blue Threadlocker Disassembly Removable Physical Form Liquid Threadlocker Container Bottle Size 10 mL Chemical Type Anaerobic For Fastener Dia. 1/4 in to 3/4 in Begins to Harden 5 min Series 242 Gap Fill 0.005 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Greater Than 93.3 Degrees C Specific Gravity 1.1 Viscosity 1,200 to 5,000 cP Removable With Hand Tools Application Locking Nuts and Bolts 1/4 in to 3/4 in . Removable With Hand Tools. Standards ASTM-D5363 Group 3 Class 2 Grade 1, CFIA, MIL-S-46163A Type II Grade N, NSF P1, OSHA Hazard Communication, RoHS Compliant Green Certification or Other Recognition NSF(R) Certified (Sustainability or Environmental Standard) Technical Specs Item Threadlocker Threadlocker Classification Threadlocker Threadlocker Strength Medium Threadlocker Color Blue Threadlocker Disassembly Removable Physical Form Liquid Threadlocker Container Bottle Size 10 mL Chemical Type Anaerobic For Fastener Dia. 1/4 in to 3/4 in Begins to Harden 5 min Series 242 Gap Fill 0.005 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Greater Than 93.3 Degrees C Specific Gravity 1.1 Viscosity 1,200 to 5,000 cP Removable With Hand Tools Application Locking Nuts and Bolts 1/4 in to 3/4 in . Removable With Hand Tools. Standards ASTM-D5363 Group 3 Class 2 Grade 1, CFIA, MIL-S-46163A Type II Grade N, NSF P1, OSHA Hazard Communication, RoHS Compliant Green Certification or Other Recognition NSF(R) Certified (Sustainability or Environmental Standard) Technical Specs Item Threadlocker Threadlocker Classification Threadlocker Threadlocker Strength Medium Threadlocker Color Blue Threadlocker Disassembly Removable Physical Form Liquid Threadlocker Container Bottle Size 10 mL Chemical Type Anaerobic For Fastener Dia. 1/4 in to 3/4 in Begins to Harden 5 min Series 242 Gap Fill 0.005 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Greater Than 93.3 Degrees C Specific Gravity 1.1 Viscosity 1,200 to 5,000 cP Removable With Hand Tools Application Locking Nuts and Bolts 1/4 in to 3/4 in . Removable With Hand Tools. Standards ASTM-D5363 Group 3 Class 2 Grade 1, CFIA, MIL-S-46163A Type II Grade N, NSF P1, OSHA Hazard Communication, RoHS Compliant Green Certification or Other Recognition NSF(R) Certified (Sustainability or Environmental Standard) Technical Specs Item Threadlocker Threadlocker Classification Threadlocker Threadlocker Strength Medium Threadlocker Color Blue Threadlocker Disassembly Removable Physical Form Liquid Threadlocker Container Bottle Size 10 mL Chemical Type Anaerobic For Fastener Dia. 1/4 in to 3/4 in Begins to Harden 5 min Series 242 Gap Fill 0.005 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Greater Than 93.3 Degrees C Specific Gravity 1.1 Viscosity 1,200 to 5,000 cP Removable With Hand Tools Application Locking Nuts and Bolts 1/4 in to 3/4 in . Removable With Hand Tools. Standards ASTM-D5363 Group 3 Class 2 Grade 1, CFIA, MIL-S-46163A Type II Grade N, NSF P1, OSHA Hazard Communication, RoHS Compliant Green Certification or Other Recognition NSF(R) Certified (Sustainability or Environmental Standard)
$
21.20
Qty:
Part #:506991
- Technical Specs Item Threadlocker Threadlocker Classification Threadlocker Threadlocker Strength Medium Threadlocker Color Blue Threadlocker Disassembly Removable Physical Form Liquid Threadlocker Container Bottle Size 50 mL Chemical Type Anaerobic For Fastener Dia. 1/4 in to 3/4 in Begins to Harden 5 min Series 242 Gap Fill 0.005 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Greater Than 93.3 Degrees C Specific Gravity 1.1 Viscosity 1,200 to 5,000 cP Removable With Hand Tools Application Locking Nuts and Bolts 1/4 in to 3/4 in . Removable With Hand Tools. Standards ASTM-D5363 Group 3 Class 2 Grade 1, CFIA, MIL-S-46163A Type II Grade N, NSF P1, OSHA Hazard Communication, RoHS Compliant Green Certification or Other Recognition NSF(R) Certified (Sustainability or Environmental Standard) Technical Specs Item Threadlocker Threadlocker Classification Threadlocker Threadlocker Strength Medium Threadlocker Color Blue Threadlocker Disassembly Removable Physical Form Liquid Threadlocker Container Bottle Size 50 mL Chemical Type Anaerobic For Fastener Dia. 1/4 in to 3/4 in Begins to Harden 5 min Series 242 Gap Fill 0.005 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Greater Than 93.3 Degrees C Specific Gravity 1.1 Viscosity 1,200 to 5,000 cP Removable With Hand Tools Application Locking Nuts and Bolts 1/4 in to 3/4 in . Removable With Hand Tools. Standards ASTM-D5363 Group 3 Class 2 Grade 1, CFIA, MIL-S-46163A Type II Grade N, NSF P1, OSHA Hazard Communication, RoHS Compliant Green Certification or Other Recognition NSF(R) Certified (Sustainability or Environmental Standard)
$
60.41
Qty:
Part #:506992
- Technical Specs
Item Threadlocker Threadlocker Classification Threadlocker Threadlocker Strength High Threadlocker Color Red Threadlocker Disassembly Permanent Physical Form Liquid Threadlocker Container Bottle Size 50 mL Chemical Type Anaerobic For Fastener Dia. Up to 3/4 in Begins to Harden 10 min Series 262 Gap Fill 0.005 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Greater Than 93.3 Degrees C Specific Gravity 1.05 Viscosity 1,800 to 5,000 cP Removable With Heat and Hand Tools Application Chemical Conditions, Heavy Shock and Vibration Applications. High Strength Requires Heat and/or Special Tools For Removal, Locking Bolts Up to 3/4 in . For Extreme Environmental Standards MIL-S-46163A Type II Grade 0, OSHA Hazard Communication, RoHS Compliant
$
60.41
Qty:
Part #:509136
- Technical Specs Item Wicking Grade Threadlocker Threadlocker Classification Wicking Grade Threadlocker Threadlocker Strength Medium Threadlocker Color Green Threadlocker Disassembly Removable Physical Form Liquid Threadlocker Container Bottle Size 50 mL Chemical Type Anaerobic For Fastener Dia. Up to 1/2 in Begins to Harden 20 min Series 290 Gap Fill 0.003 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Greater Than 93.3 Degrees C Specific Gravity 1.07 Viscosity 25 to 55 cP Removable With Hand Tools Application For Locking Preassembled Fasteners No. 2 to 1/2 in . Penetrates By Capillary Action Standards MIL-S-46163A Type III Grade R, NSF P1/ANSI 61 Certified, OSHA Hazard Communication, RoHS Certified
$
57.02
Qty:
Part #:502037
- Technical Specs
Item RTV Silicone Sealant
Type Shrink-Resistant for Precut Gaskets
Size 80 mL
Color Blue
Temp. Range -65 to 500 Degrees F
Specific Gravity 1.04
Flash Point 199.4 Degrees F
Full Cure 24 hr
Begins to Harden 10 min
Application Coat Pre-cut Gaskets for Increased Reliability
$
11.89
Qty:
Part #:509455
- Technical Specs Item Pipe Thread Sealant Size 50 mL Container Type Bottle Chemical Type Methacrylate Ester Color Purple Gas Pressure Range 10,000 psi Begins to Harden Not Specified Application Temp. Range 72 Degrees F Performance Temp. Range -65 Degrees to 300 Degrees F Flash Point 199.94 Degrees F Specific Gravity 1.02 @ 25 Degrees C Viscosity 14,000cP For Use With 7649, Primer 7088, or 7471 Application Locks and Seals Hydraulic and Pneumatic Fittings without Fouling the System, Suitable for Fittings Up to 50mm in Diameter Includes Pneumatic and Hydraulic Fittings
$
55.44
Qty:
Part #:505912
- Technical Specs
Item Rust Treatment Color Opaque Container Size 5 gal Dry Time 20 min Application Method Brush Or Commercial Sprayer
$
918.58
PAIL
Qty:
Displaying: 1 - 24 of 101 Matching Items