Federal Process
Adhesives, Sealants, and Tapes
View:
Active Filters :
- Main Category: Adhesives, Sealants, and Tapes
- Brand: Federal Process Hilti
Part #:510411
-
Designed for use on difficult service conditions associated with stainless steel, aluminum & brass threaded connections.
Helps prevent seizing & galling
UL® Listed thread sealant 561R
Meets Mil Spec MIL-T-27730A
Temperature Range -450deg F to 550deg F
Pressure Range 300psi max
High Density PTFE
NOT for oxygen.
$
9.10
Qty:
Part #:511262
-
HDM Manual adhesive dispenser Manual dispenser HDM 500 + black cartr #3498241
Manual hybrid/epoxy adhesive anchor dispenser
Dispenser typeManual
$
292.49
Qty:
Part #:511332
-
HIT-RE 500 V3 Epoxy anchor Epoxy adh RE 500-V3 11.1oz/330ml #2123401 Base materialsConcrete (cracked), Concrete (uncracked)Base material conditionDry, Submerged, Water-filled, WetApprovals / Test reportsICC-ES report (concrete)Seismic loadingYesPROFIS SoftwareYesClean-TecNoCleaning proceduresAutomatic Cleaning (SafeSet Hollow Drill Bit), Compressed-Air CleaningStorage and transportation temperature range41 - 77 °FIn-service temperature &ndash range-40 - 158 °FShelf life from date of manufacture (at 73°F/23°C and 50% relative humidity)12 monthsProduct informationThis product is subject to the Chemicals Prohibition Ordinance (ChemVerbotsV). It is to be used by professionals within the scope of their work and, in accordance with § 8 para. 3 no. 1 of the ChemVerbotsV, is to be used exclusively for its intended purpose as anchor adhesive, for rebar connections (typically steel-to-concrete and/or concrete-to-concrete connections), as well as for other intended fastening and uses within the scope of construction activities. Purchasers must comply with all existing legal requirements for the use of these products and may use them only as permitted. Information in the safety data sheets and operating instructions on the use of these products, the hazards associated with their use, the necessary safety measures during intended use and in the event of unforeseen spillage or release, and proper disposal must always be observed. The operating instructions and safety data sheets can be accessed in the detailed view of the products concerned at www.hilti.de in a format that can be saved and printed, and the operating instructions are enclosed with the products. Safety instructions Wear protective gloves/protective clothing/eye protection/face protection. Do not get in eyes, on skin or on clothing. In case of contact with eyes rinse thoroughly with water for several minutes. Remove contact lenses if possible, continue rinsing. If eye irritation, skin irritation or rash persist seek medical advice/attention. In case of contact with skin wash with plenty of soap and water. Disposal Completely emptied cartridges can be disposed of via the Dual System (yellow garbage can). Full/partially emptied containers are to be disposed of as special waste.Product ClassUltimate
$
81.77
Qty:
Part #:511731
-
HDM Manual adhesive dispenser Manual dispenser HDM 500 + red cartr #3498242
Manual hybrid/epoxy adhesive anchor dispenser
Dispenser typeManual
$
292.49
Qty:
$
44.92
Qty:
Part #:511740
-
Cartridge holder red HIT-CR 500 #2007059
$
45.81
Qty:
Part #:511331
-
HIT-HY 200-A V3 Adhesive anchor (New Verision)
Ultimate-performance injectable hybrid mortar with approvals for anchoring structural steel baseplate and post-installed rebar connections
Base materialsConcrete (cracked), Concrete (lightweight), Concrete (uncracked)
Approvals / Test reportsDOT approval (contact Hilti), ICC-ES report (concrete), ICC-ES report (masonry), LABC, Seismic
PROFIS SoftwareYes
Base materialsConcrete (cracked), Concrete (lightweight), Concrete (uncracked)Approvals / Test reportsDOT approval (contact Hilti), ICC-ES report (concrete), ICC-ES report (masonry), LABC, SeismicPROFIS SoftwareYesClean-TecNoCleaning proceduresAutomatic Cleaning (SafeSet Hollow Drill Bit), Compressed-Air Cleaning, Non CleaningStorage and transportation temperature range41 - 77 °FIn-service temperature &ndash range-40 - 248 °FShelf life from date of manufacture (at 73°F/23°C and 50% relative humidity)12 monthsProduct ClassUltimate
HIT-HY 200-A Adhesive anchor Hybrid adh HY 200-A 11.1oz/330ml #2022791 (Old Verision)Base materialsConcrete (cracked), Concrete (uncracked), Masonry (grout-filled CMU)Base material conditionDry, WetApprovals / Test reportsICC-ES report (concrete), SeismicSeismic loadingYesFatigue loadingNoFire resistanceNoPROFIS SoftwareYesClean-TecNoAnchoring elementsHAS threaded rods, HIS-N internally threaded sleeves, HIT-Z torque controlled bonded anchors, RebarCleaning proceduresAutomatic Cleaning (SafeSet Hollow Drill Bit), Compressed-Air Cleaning, Non CleaningStorage and transportation temperature range41 - 77 °FIn-service temperature &ndash range-40 - 248 °FShelf life from date of manufacture (at 73°F/23°C and 50% relative humidity)12 monthsProduct ClassUltimate
$
64.39
Qty:
Part #:511683
-
HIT-HY 200-R Adhesive anchor Hybrid adh HY 200-R 11.1oz/330ml #2022793 Replaced By
HIT-HY 200-R V3 Adhesive anchor
Ultimate-performance injectable hybrid mortar with approvals for post-installed rebar connections and anchoring structural steel baseplate
Base materials Concrete (cracked), Concrete (lightweight), Concrete (uncracked)
Approvals / Test reports DOT approval (contact Hilti), ICC-ES report (concrete), ICC-ES report (masonry), LABC, Seismic
PROFIS Software Yes
$
64.39
Qty:
Part #:507221
-
HVU2 Anchor capsule Adhesive capsule HVU2 1/2" x 4 1/4" #2234721
Ultimate-performance foil capsule for heavy-duty anchoring in concrete
PROFIS SoftwareYes
Tested/approved for diamond drillingYes
In-service temperature &ndash range-40 - 248 °F
PROFIS SoftwareYesTested/approved for diamond drillingYesIn-service temperature &ndash range-40 - 248 °FStorage and transportation temperature range-4 - 77 °FShelf life from date of manufacture (at 73°F/23°C and 50% relative humidity)24 monthsProduct ClassUltimate
Part #:800615
- Chemical Resistance Excellent resistance to gasoline, kerosene, petroleum solvents, diesel fuel, propane, butane, LPG, water, cutting oils. NOT oxygen. Set Time Depending on conditions, up to 24 hours. Dries to the touch. Packaging Available in 1/4 pint, 1 pint and pint cans with brush-top lids. Also available in gallons with friction top:
$
68.77
Qty:
Part #:804193
- &bull Provides protection against seizing, galling, rust and corrosion at three high-temperature levels. &bull Brush on nuts, bolts, screws, bushings, cam rollers, shafts, sleeves, couplings, con vey ers, motors, pumps, turbines and valves etc. &bull Speeds assembly and facilitates disassembly. &bull Industry applications include steelmills, forges, foundries, die casters, refining and chemical installations, marine services, farm and con struc tion equipment, power and utility plants, paper and pulp mills and gen er al plant main te nance. &bull Non-hardening, non-dripping.
$
20.93
Qty:
Part #:800123
- &bull Non-hardening, non-toxic, opaque, dark green paste designed specifically for ethanol blended gasoline including E10 and E85 (for 100% ethanol or 100% methanol applications &ndash use Gasoila 100). &bull Provides a positive seal on pipe threads, joints, fittings, hoses, nozzles, pump assemblies, oil burners, hydraulics, bolts, compressors, engines, motors, fuel lines and couplings.&bull For use on brass, copper, stainless steel, aluminum, black pipe, tin & galvanized pipe.&bull Excellent resistance to gasoline, ethanol blended gasoline such as E10 and E85, petroleum solvents, kerosene diesel oil, BioDiesel, propane, jet fuels, butane, LPG, cutting oils, ammonia, aliphatic solvents, acids, steam and potable water.&bull NOT for use with Oxygen.&bull Temperature Range -100°F to 600°F (-74°C to 318°C).&bull Pressure Range Up to 10,000 psi when sealing liquids & up to 3,000 psi with gases. &bull One year shelf life.
$
47.21
Qty:
Part #:800453
- · For Damaged, Irregular, Mis-cut and Straight Threads · Vegetable Oil Base · Thick Consistency, 10-15% more Solids than Conventional SealantsTYPE Oyster White Paste with PTFE
$
39.80
Qty:
Part #:801493
- &bull Soft-setting, non-toxic, PTFE paste. &bull Provides a positive seal on pipe threads, joints, fittings, hoses, noz zles, LPG cylinders, pump as sem blies, oil burners, hydraulics, compressors, engines, motors, hous ings, plugs, fuel lines, cou plings and more. &bull Use on brass, copper, stain less steel, aluminum, black pipe, tin, galvanized, ABS, CPVC, PVC plas tics, nylon, poly eth yl ene, polypro py lene, polybutylene and more. &bull Excellent resistance to gasoline (up to 20% alcohol and petroleum blends), petroleum solvents, ker o sene, diesel oil, propane, butane, LPG, cutting oils, ammonia, aliphatic solvents, acids, steam, potable water, com pressed air and more. NOT for use on oxygen. &bull Remains pliable in cold temperatures. &bull Temperature Range -100°F to 600°F (-74°C to 318°C). &bull Pressure Range To 10,000 psi sealing liquids to 3,000 psi sealing gases. &bull One year shelf life when stored at 40°F to 80°F (5°C to 27°C). &bull For alcohol blended gasoline ethanol see E-Seal.
$
18.10
Qty:
Part #:803041
- &bull Provides protection against seizing, galling, rust and corrosion at three high-temperature levels. &bull Brush on nuts, bolts, screws, bushings, cam rollers, shafts, sleeves, couplings, con vey ers, motors, pumps, turbines and valves etc. &bull Speeds assembly and facilitates disassembly. &bull Industry applications include steelmills, forges, foundries, die casters, refining and chemical installations, marine services, farm and con struc tion equipment, power and utility plants, paper and pulp mills and gen er al plant main te nance. &bull Non-hardening, non-dripping.
$
10.81
Qty:
Part #:521556
- Adhesive capsule HVU2 7/8" x 6 5/8" #2234724Ultimate-performance foil capsule for heavy-duty anchoring in concrete
PROFIS SoftwareYesTested/approved for diamond drillingYesIn-service temperature &ndash range-40 - 248 °FStorage and transportation temperature range-4 - 77 °FShelf life from date of manufacture (at 73°F/23°C and 50% relative humidity)24 monthsProduct ClassUltimate
Part #:507560
- Adhesive capsule HVU2 3/8" x 3 1/2" #2234720
Ultimate-performance foil capsule for heavy-duty anchoring in concrete
PROFIS SoftwareYes
Tested/approved for diamond drillingYes
In-service temperature &ndash range-40 - 248 °F
$
175.93
BOX
Qty:
Part #:507222
- Adhesive capsule HVU2 5/8" x 5" #2234722
Ultimate-performance foil capsule for heavy-duty anchoring in concrete
PROFIS SoftwareYes
Tested/approved for diamond drillingYes
In-service temperature &ndash range-40 - 248 °F
Part #:507223
- Adhesive capsule HVU2 3/4" x 6 5/8" #2234723
Ultimate-performance foil capsule for heavy-duty anchoring in concrete
PROFIS SoftwareYes
Tested/approved for diamond drillingYes
In-service temperature &ndash range-40 - 248 °F
Displaying: 1 - 19 of 19 Matching Items