Hilti
Adhesives, Sealants, and Tapes


Displaying: 1 - 23 of 23 Matching Items
23 Items
View:
Active Filters :
Part #:511262

HDM Manual adhesive dispenser Manual dispenser HDM 500 + black cartr #3498241 Manual hybrid/epoxy adhesive anchor dispenser Dispenser typeManual
$ 292.49
Part #:511332

HIT-RE 500 V3 Epoxy anchor Epoxy adh RE 500-V3 11.1oz/330ml #2123401 Base materialsConcrete (cracked), Concrete (uncracked)Base material conditionDry, Submerged, Water-filled, WetApprovals / Test reportsICC-ES report (concrete)Seismic loadingYesPROFIS SoftwareYesClean-TecNoCleaning proceduresAutomatic Cleaning (SafeSet Hollow Drill Bit), Compressed-Air CleaningStorage and transportation temperature range41 - 77 &degFIn-service temperature &ndash range-40 - 158 &degFShelf life from date of manufacture (at 73&degF/23&degC and 50% relative humidity)12 monthsProduct informationThis product is subject to the Chemicals Prohibition Ordinance (ChemVerbotsV). It is to be used by professionals within the scope of their work and, in accordance with &sect 8 para. 3 no. 1 of the ChemVerbotsV, is to be used exclusively for its intended purpose as anchor adhesive, for rebar connections (typically steel-to-concrete and/or concrete-to-concrete connections), as well as for other intended fastening and uses within the scope of construction activities. Purchasers must comply with all existing legal requirements for the use of these products and may use them only as permitted. Information in the safety data sheets and operating instructions on the use of these products, the hazards associated with their use, the necessary safety measures during intended use and in the event of unforeseen spillage or release, and proper disposal must always be observed. The operating instructions and safety data sheets can be accessed in the detailed view of the products concerned at www.hilti.de in a format that can be saved and printed, and the operating instructions are enclosed with the products. Safety instructions Wear protective gloves/protective clothing/eye protection/face protection. Do not get in eyes, on skin or on clothing. In case of contact with eyes rinse thoroughly with water for several minutes. Remove contact lenses if possible, continue rinsing. If eye irritation, skin irritation or rash persist seek medical advice/attention. In case of contact with skin wash with plenty of soap and water. Disposal Completely emptied cartridges can be disposed of via the Dual System (yellow garbage can). Full/partially emptied containers are to be disposed of as special waste.Product ClassUltimate
$ 81.77
Part #:511731

HDM Manual adhesive dispenser Manual dispenser HDM 500 + red cartr #3498242 Manual hybrid/epoxy adhesive anchor dispenser Dispenser typeManual
$ 292.49
Part #:511733

Black cartridge HIT-CB 500 #2007057
$ 44.92
Part #:511740

Cartridge holder red HIT-CR 500 #2007059
$ 45.81
Part #:511331

HIT-HY 200-A V3 Adhesive anchor (New Verision) Ultimate-performance injectable hybrid mortar with approvals for anchoring structural steel baseplate and post-installed rebar connections Base materialsConcrete (cracked), Concrete (lightweight), Concrete (uncracked) Approvals / Test reportsDOT approval (contact Hilti), ICC-ES report (concrete), ICC-ES report (masonry), LABC, Seismic PROFIS SoftwareYes Base materialsConcrete (cracked), Concrete (lightweight), Concrete (uncracked)Approvals / Test reportsDOT approval (contact Hilti), ICC-ES report (concrete), ICC-ES report (masonry), LABC, SeismicPROFIS SoftwareYesClean-TecNoCleaning proceduresAutomatic Cleaning (SafeSet Hollow Drill Bit), Compressed-Air Cleaning, Non CleaningStorage and transportation temperature range41 - 77 &degFIn-service temperature &ndash range-40 - 248 &degFShelf life from date of manufacture (at 73&degF/23&degC and 50% relative humidity)12 monthsProduct ClassUltimate HIT-HY 200-A Adhesive anchor Hybrid adh HY 200-A 11.1oz/330ml #2022791 (Old Verision)Base materialsConcrete (cracked), Concrete (uncracked), Masonry (grout-filled CMU)Base material conditionDry, WetApprovals / Test reportsICC-ES report (concrete), SeismicSeismic loadingYesFatigue loadingNoFire resistanceNoPROFIS SoftwareYesClean-TecNoAnchoring elementsHAS threaded rods, HIS-N internally threaded sleeves, HIT-Z torque controlled bonded anchors, RebarCleaning proceduresAutomatic Cleaning (SafeSet Hollow Drill Bit), Compressed-Air Cleaning, Non CleaningStorage and transportation temperature range41 - 77 &degFIn-service temperature &ndash range-40 - 248 &degFShelf life from date of manufacture (at 73&degF/23&degC and 50% relative humidity)12 monthsProduct ClassUltimate
$ 64.39
Part #:511683

HIT-HY 200-R Adhesive anchor Hybrid adh HY 200-R 11.1oz/330ml #2022793 Replaced By HIT-HY 200-R V3 Adhesive anchor Ultimate-performance injectable hybrid mortar with approvals for post-installed rebar connections and anchoring structural steel baseplate Base materials Concrete (cracked), Concrete (lightweight), Concrete (uncracked) Approvals / Test reports DOT approval (contact Hilti), ICC-ES report (concrete), ICC-ES report (masonry), LABC, Seismic PROFIS Software Yes
$ 64.39
Part #:507221

HVU2 Anchor capsule Adhesive capsule HVU2 1/2" x 4 1/4" #2234721 Ultimate-performance foil capsule for heavy-duty anchoring in concrete PROFIS SoftwareYes Tested/approved for diamond drillingYes In-service temperature &ndash range-40 - 248 &degF PROFIS SoftwareYesTested/approved for diamond drillingYesIn-service temperature &ndash range-40 - 248 &degFStorage and transportation temperature range-4 - 77 &degFShelf life from date of manufacture (at 73&degF/23&degC and 50% relative humidity)24 monthsProduct ClassUltimate
$ 201.02 BX
BX
Part #:841-442-1527514

Loctite&reg Thread Sealants w/ PTFEProduct DetailsA general purpose sealant with the added lubricity of PTFE for metal pipesWon't shred like tape and allows easy disassemblyTesting and ApprovalsCFIA
$24.66 MSRP $ 24.42
Part #:521556

Adhesive capsule HVU2 7/8" x 6 5/8" #2234724Ultimate-performance foil capsule for heavy-duty anchoring in concrete PROFIS SoftwareYesTested/approved for diamond drillingYesIn-service temperature &ndash range-40 - 248 &degFStorage and transportation temperature range-4 - 77 &degFShelf life from date of manufacture (at 73&degF/23&degC and 50% relative humidity)24 monthsProduct ClassUltimate
$ 194.36 BOX
BX
Part #:507560

Adhesive capsule HVU2 3/8" x 3 1/2" #2234720 Ultimate-performance foil capsule for heavy-duty anchoring in concrete PROFIS SoftwareYes Tested/approved for diamond drillingYes In-service temperature &ndash range-40 - 248 &degF
$ 175.93 BOX
Part #:507222

Adhesive capsule HVU2 5/8" x 5" #2234722 Ultimate-performance foil capsule for heavy-duty anchoring in concrete PROFIS SoftwareYes Tested/approved for diamond drillingYes In-service temperature &ndash range-40 - 248 &degF
$ 243.04 BX
BX
Part #:507223

Adhesive capsule HVU2 3/4" x 6 5/8" #2234723 Ultimate-performance foil capsule for heavy-duty anchoring in concrete PROFIS SoftwareYes Tested/approved for diamond drillingYes In-service temperature &ndash range-40 - 248 &degF
$ 192.73 BX
BX
Part #:841-442-135479

515 Gasket Eliminator Flange Sealants, 50 mL Tube, Purple Loctite&reg 515TM Gasket Eliminator&reg Flange SealantsProduct DetailsMakes flexible gaskets for rigid machined flanges with less than .050" gapFlexes with flanges that move in service
$ 26.76 TUBE
Part #:841-442-1690727

Product Category CHEMICALS LUBRICANTS &amp PAINTS Product Subcategory CHEMICALS LUBRICANTS &amp PAINTS OTHER UPC Code 793400031011
$ 53.38 KT
Part #:841-442-235573

Country of Origin UNITED STATES. HAZMAT Item NO. Special Order Item NO. State Restricted NO:
$ 243.52
Part #:841-442-209681

Country of Origin UNITED STATES. HAZMAT Item NO. Special Order Item NO. State Restricted NO:
$25.67 MSRP $ 25.41
Part #:841-442-209750

Technical Specs Item Corrosion Inhibitor NSF Rating Not Rated Lubricant Film Wet Max. Operating Temp. 200 Degrees F Lubricant Container Aerosol Can Container Size 12 oz Lubricant Color Brown Net Weight 12 oz Specific Gravity 0.73 VOC Content 69.6% Application Aerospace, Aviation
$223.56 MSRP $ 221.33 BOX
Part #:841-442-235487

Country of Origin UNITED STATES. HAZMAT Item NO. Special Order Item NO. State Restricted NO:
$25.61 MSRP $ 25.28
Part #:841-442-2087067

Product Category ADHESIVES SEALANTS &amp TAPES UPC Code 79340010352 Loctite&reg 567TM PST&reg Thread Sealants, High TemperatureProduct DetailsInstant thread sealant for taper/taper threads and fittingsGreat choice for high temperature and high pressure applicationsControlled strength for easy disassembly with hand toolsPrevents leaks, does not shrink, crack, creep, or shredProvides excellent solvent resistanceEliminates galling on stainless steelTesting and ApprovalsABS NSF/ANSI 61 UL Classified for U.S. ULC Classified for Canada CFIA Listed
$ 29.83
Part #:841-442-193996

Product Category ADHESIVES SEALANTS &amp TAPES Product Subcategory SEALING PRODUCTS Superflex&reg RTV, Silicone Adhesive Sealant, 80 mL Tube, Black UPC Code 79340593305 Loctite&reg Superflex&reg RTV, Silicone Adhesive SealantsProduct DetailsA neutral curing and non-corrosive sealantSuperior adhesion and flexibilityAdheres to a wide range of material surfacesTesting and ApprovalsUL Listed for US NSF/ANSI 51 CFIA
$10.55 MSRP $ 10.44 TUBE
 
Displaying: 1 - 23 of 23 Matching Items