Mitutoyo
Apex Tool Group
View:
Active Filters :
- Manufacturer: Apex Tool Group Mitutoyo
Part #:405675
- #72 "S" Hook, Zinc Plated
For Attaching Accessories to Chain
After Engaging Chain, Close the "S" Hook to Prevent Disengagement
Standard Material Low Carbon Steel
Packaging 50 Per Carton or 6 Per Bag (Except #120, 2 Per Bag). 10 Bags Per Carton
Order Unit is "Each"
DO NOT EXCEED THE WORKING LOAD LIMIT
Do Not Use for Overhead Lifting or Hoisting
Qty:
Part #:841-329-86996
- Extra Large Kneeling Pad
The GEARWRENCH® Kneeling Pad is the super convenient way to keep your knees comfortably off of a hard or rough floor. A built in grab handle makes it easy to position or hang up when not in use. Three layers of high-density solvent resistant foam provide an unmatched degree of cushioning so you can get the job done in comfort. A magnetized recess holds nuts, bolts, and spare parts.
Qty:
Part #:507066
- Full Flexible Steel Rules
The Mitutoyo Full Flexible Steel Rules provides highly accurate length and other linear measurements on a fully flexible steel ruler.
Graduations 1/8,1/16,1/32,1/64
Width 1/2"
Accuracy +.004 / &ndash.0035" / +0.1 / &ndash0.09(mm)
$
20.91
Qty:
Part #:507010
- Outside Micrometers
The Mitutoyo outside micrometer features either a ratchet stop or friction thimble that applies constant measuring force on a workpiece for exact repetitive readings. Available in metric and inches.
Series 103 Technical Data
Mechanical
No SPC Output
Carbide Measuring Tips
2" to 3"
Accuracy ±.0001"
Ratchet Stop
$
220.57
Qty:
Part #:507026
- Telescoping Gage Set
The Mitutoyo telescoping gage set features hardened steel plungers triggered by a balanced spring for smooth, reliable inside hole and opening measurements.
Range 0.315" to 2.125"
Set Includes
155-121
155-122
155-123
155-124
$
183.60
Qty:
Part #:507020
- Magnetic Stands
The Mitutoyo magnetic stand pertains to all dial indicators and dial test indicators and are available in many different sizes, styles and types.
Applicable holding stem diameter 8,9.53,6mm/3/8"
$
187.11
Qty:
Part #:507063
- Full Flexible Steel Rules
The Mitutoyo Full Flexible Steel Rules provides highly accurate length and other linear measurements on a fully flexible steel ruler.
Graduations 1/8,1/16,1/32,1/64
Width 1/2"
Accuracy +.004 / &ndash.0035" / +0.1 / &ndash0.09(mm)
$
20.91
Qty:
Part #:507065
- Full Flexible Steel Rules
The Mitutoyo Full Flexible Steel Rules provides highly accurate length and other linear measurements on a fully flexible steel ruler.
Graduations 1/8,1/16,1/32,1/64
Width 1/2"
Accuracy +.005 / &ndash.0035" / +0.13 / &ndash0.09(mm)
$
41.25
Qty:
Part #:811450
- 1/2" Drive 1/2" F x 3/8" M Impact Adapter (Replaces Williams BS-131-BA
GEARWRENCH offers a wide range of impact products in open stock & sets that are designed to deliver the performance and strength that the professional users require. They are made from chrome molybdenum alloy steel for exceptional strength and durability. Our sockets have a manganese phosphate coating to resist corrosion. The sockets also feature highly visible laser etched markings and a secondary size hard stamping. The sockets feature off-corner loading to reduce fastener rounding. The GEARWRENCH impact product family will allow the professional user to FORGE AHEAD.
Qty:
Part #:841-329-80430
- 3/8" Drive Hex Bit Metric Socket 9mm
GEARWRENCH bit sockets have heat treated alloy steel base sockets for durability and long tool life. Our bits are manufactured from S2 steel for maximum strength. The hex bit sockets help users loosen & tighten internal hex fasteners.
Qty:
Part #:841-185-WE1010NA
- For many reasons, the Weller WE 1010 soldering station is a smart soldering solution for several different types of jobs. If you want a powerful tool that gets the job done quickly and reliably, try the WE 1010. This unit has many advantages, but some of its main draws are its
Power With the WE1010NA digital soldering station, you'll have exceptional power to get the job done fast. As the most powerful soldering station in its class, the 120V, 70W power station helps you work efficiently, reliably and precisely. With 40 percent more power than the WES / WESD station, the WEP 70 soldering iron heats up faster and has a shorter recovery time, which helps you produce high-quality results and get more done every time.
Ease of use The WE 1010 is extraordinarily user-friendly. The controls are designed to be intuitive, and the iron features an ergonomic design that's easier to control. The power station features an easy-to-read LCD screen, three push buttons and a power switch on the front of the unit. The iron is lightweight and features a pencil design that makes for comfort and easy maneuvering.
Precision When you use this product, you'll be able to more easily deliver consistently high-quality results. The smooth handling and control that the WEP 70 soldering iron offers and its user-friendly controls contribute to this quality. The excellent temperature stability and accuracy of the unit have a significant impact as well. Additionally, you can use a range of tips and temperatures to reliably get the exact results you need.
Safety WE1010NA has numerous features that will reduce potential hazards throughout your workday. It features a reinforced safety rest that provides extra stability when storing the iron between uses. The cables of the iron are also heat-resistant and meet industry standards for mechanical strength. The unit is also ESD safe and UL and CE certified for electrical safety.
Cost efficiency Despite having all of these incredible features, the WE 1010 is an extremely cost-effective tool. It's an affordable soldering iron overall and also contains elements meant to help you save money as you use it. The ET tips that the iron uses have an extremely long life, which significantly reduces operational costs. It also has a standby mode that the iron automatically enters into when not in use, which helps reduce energy use and further extend the life of your tips.
$
269.59
Qty:
Part #:841-193-7679038
- 020418224010
Swaging Tools, 1/8 in - 3/16 in Rope
Campbell® Swaging ToolsProduct DetailsFor swaging ferrules onto wire rope or cableDo Not use on coated cableIf used on coated cable, remove the coating from the assembly area
Qty:
Qty:
Part #:841-504-293-348-30
-
0 - 1" X .00005"/0.001mm IP65 Digimatic Outside Micrometer, No SPC Output, Friction
IP65 Waterproof rated
Auto On/Off
Friction Thimble
Carbide measuring faces
Supplied in fitted plastic case
Product Specifications
STYLEGeneral Purpose
TYPEMicrometer
BATTERY TYPESR44
RESOLUTION/GRADUATION INCHES0.001
ANVIL SHAPESpherical
MINIMUM MEASUREMENT INCHES0
DATA OUTPUTNo
MEASURING FACE MATERIALCarbide
METRIC OR INCHInch,Metric
UPC603908585992
MECHANICAL OR DIGITALDigital
MINIMUM MEASUREMENT MM0
PARALLELISM.00004 In
MAXIMUM MEASUREMENT MM25.4
ACCURACY (+/- ) INCHES0.00005
INSIDE DIAMETER CONTACT POINT MATERIAL --
ACCURACY (+/-) MM0.001
SERIESDigimatic
THIMBLE TYPERatchet Friction
LONG FORM CALIBRATION CERTIFICATE INCLUDEDNo
IP RATINGIP65
MAXIMUM MEASUREMENT INCHES1
RESOLUTION/GRADUATION MM0.001
BRANDMitutoyo
CASEYes
DIAL FACE COLOR--
MINIMUM OUTSIDE DIAMETER - INCHIP65
FRACTION OPTIONNo
MANUFACTURERS PART NUMBER293-348-30
DIGITALYes
ROTATING SPINDLENo
POWER SOURCEBattery
$
289.05
Qty:
Part #:841-504-500-196-30
- Mitutoyo Series 500 Standard Type Digimatic Calipers with Thumb RollerProduct DetailsLarge and clear LCD readoutThe ZERO/ABS key allows the display to be Zero-Set at any slider position along the scale for incremental comparison measurementsThumb roller included
$
226.32
Qty:
Part #:841-182-PQR1316N
- Country of Origin PEOPLE'S REPUBLIC OF CHINA HAZMAT Item NO Special Order Item NO State Restricted NO:
Qty:
Part #:841-192-CDS12N
- Product Category HAND TOOLS/Product Subcategory SOCKETS RATCHETS ADAPTORS & EXTENSIONS
Qty:
Part #:841-403-30209
- Superchuck Ball Bearing Chucks, K30
Jacobs Chuck® Superchuck Ball Bearing ChucksProduct DetailsBall bearing construction maximizes gripping force and drilling accuracyJaws center-ground for straightness and alignmentOne-piece sleeve eliminates crack between driving teeth often found in other designsThrough-hardened sleeve teeth plus hardened nose and keyholes provide outstanding wear resistanceFluted sleeve standard
Qty:
Part #:841-403-30598
- Country of Origin PEOPLE'S REPUBLIC OF CHINA HAZMAT Item NO Special Order Item NO State Restricted NO:
Qty:
Part #:841-504-182-105
- Series 182 Steel Rulers, 6 in, Wide, Stainless Steel, Inch/Metric, Rigid
UPC 603908050759
Mitutoyo Series 182 Steel RulersProduct DetailsEasy to readClear graduations on satin-chrome finishStainless Tempered
$
22.32
Qty:
Part #:690-5413205
- 2" Anchor Shackle, Screw Pin, Forged Carbon Steel, Painted Blue
Shackle Bodies Are Drop-Forged Carbon Steel
Self Colored (Painted Blue)
C-419-S Shackles Meet the Design Requirements of Federal Specification RR-C-271, Type IVA, Grade A, Class 2
Working Load Limit, Size, Manufacture Name, Date Code and USA Permanently Marked on Each Shackle
Statistically Tested for Impact Resistance, Tensile Strength, Hardness, Ductility and Fatigue
419 Series Shackles Meet or Exceed All Manufacturing Requirements of the ASME B30.26 &rdquoRigging Hardware&rdquo. These Include the Material Ductility Requirement (Section 26-1.1.2), the Design Factor Requirement (Section 26.1.2), the Identification Requirement (Section 26-1.5.1), and the Effective Temperature Range (Section 26-1.6.1). The Shackles Can Be Proof Tested in Accordance with Section 26-1.4 Upon Request
Certification Available Upon Request
6 to 1 Design Factor
Pins and Bolts Are Heat-Treated and Made of Alloy Steel
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:690-5410895
- 1/2" Alloy Anchor Shackle, Screw Pin, Forged Alloy, Galvanized
Shackle Bodies Are Drop-Forged Alloy Steel
Galvanized to Meet ASTM A-153 Specifications
A-419-G Shackles Meet the Design Requirements of Federal Specification RR-C-271, Type IVA, Grade B, Class 2
Working Load Limit, Size, Manufacture Name, Date Code, "CE" Mark, and USA Permanently Marked on Each Shackle
Statistically Tested for Impact Resistance, Tensile Strength, Hardness, Ductility and Fatigue
419 Series Shackles Meet or Exceed All Manufacturing Requirements of the ASME B30.26 &rdquoRigging Hardware&rdquo. These Include the Material Ductility Requirement (Section 26-1.1.2), the Design Factor Requirement (Section 26.1.2), the Identification Requirement (Section 26-1.5.1), and the Effective Temperature Range (Section 26-1.6.1). The Shackles Can Be Proof Tested in Accordance with Section 26-1.4 Upon Request
Certification Available Upon Request
5 to 1 Design Factor
Pins and Bolts Are Heat-Treated and Made of Alloy Steel and Painted Orange
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:690-5411295
- 3/4" Alloy Anchor Shackle, Screw Pin, Forged Alloy, Galvanized
Shackle Bodies Are Drop-Forged Alloy Steel
Galvanized to Meet ASTM A-153 Specifications
A-419-G Shackles Meet the Design Requirements of Federal Specification RR-C-271, Type IVA, Grade B, Class 2
Working Load Limit, Size, Manufacture Name, Date Code, "CE" Mark, and USA Permanently Marked on Each Shackle
Statistically Tested for Impact Resistance, Tensile Strength, Hardness, Ductility and Fatigue
419 Series Shackles Meet or Exceed All Manufacturing Requirements of the ASME B30.26 &rdquoRigging Hardware&rdquo. These Include the Material Ductility Requirement (Section 26-1.1.2), the Design Factor Requirement (Section 26.1.2), the Identification Requirement (Section 26-1.5.1), and the Effective Temperature Range (Section 26-1.6.1). The Shackles Can Be Proof Tested in Accordance with Section 26-1.4 Upon Request
Certification Available Upon Request
5 to 1 Design Factor
Pins and Bolts Are Heat-Treated and Made of Alloy Steel and Painted Orange
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:690-5411695
- 1" Alloy Anchor Shackle, Screw Pin, Forged Alloy, Galvanized
Shackle Bodies Are Drop-Forged Alloy Steel
Galvanized to Meet ASTM A-153 Specifications
A-419-G Shackles Meet the Design Requirements of Federal Specification RR-C-271, Type IVA, Grade B, Class 2
Working Load Limit, Size, Manufacture Name, Date Code, "CE" Mark, and USA Permanently Marked on Each Shackle
Statistically Tested for Impact Resistance, Tensile Strength, Hardness, Ductility and Fatigue
419 Series Shackles Meet or Exceed All Manufacturing Requirements of the ASME B30.26 &rdquoRigging Hardware&rdquo. These Include the Material Ductility Requirement (Section 26-1.1.2), the Design Factor Requirement (Section 26.1.2), the Identification Requirement (Section 26-1.5.1), and the Effective Temperature Range (Section 26-1.6.1). The Shackles Can Be Proof Tested in Accordance with Section 26-1.4 Upon Request
Certification Available Upon Request
5 to 1 Design Factor
Pins and Bolts Are Heat-Treated and Made of Alloy Steel and Painted Orange
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Displaying: 1 - 24 of 48 Matching Items