Worthington Cylinders
Apex Tool Group
View:
Active Filters :
- Manufacturer: Apex Tool Group Worthington Cylinders
Part #:500924
- The Bernzomatic® 14.1 oz Propane Hand Torch Cylinder is a portable, convenient way to fuel your hand torch. Constructed of durable steel, the slim, lightweight cylinder is easy to grip and maneuver as you work. This product is compatible with our Digital Fuel Gauge to easily measure how much fuel is remaining in the cylinder. Propane fuel has an in-air flame temperature of 3,600 degrees Fahrenheit.
Uses
Small Diameter Soldering
Softening Putty and Paint
Qty:
Part #:405675
- #72 "S" Hook, Zinc Plated
For Attaching Accessories to Chain
After Engaging Chain, Close the "S" Hook to Prevent Disengagement
Standard Material Low Carbon Steel
Packaging 50 Per Carton or 6 Per Bag (Except #120, 2 Per Bag). 10 Bags Per Carton
Order Unit is "Each"
DO NOT EXCEED THE WORKING LOAD LIMIT
Do Not Use for Overhead Lifting or Hoisting
Qty:
Part #:505234
- TS4000T Advanced Performance Torch
The Bernzomatic® Advanced Performance Torch is built with instant on/off ignition, a swirl flame profile and flame lock option for continuous use. It is pressure regulated for consistent performance when inverted, making it ideal for large diameter soldering, light brazing, woodworking and cooking. The Advanced Performance Torch is compatible with 14.1 oz Bernzomatic MAP-Pro® fuel and 14.1 oz and 16 oz Bernzomatic Propane fuel, sold separately. Limited Lifetime Warranty.
Uses
Brazing
Cooking
Small to Large Diameter Soldering
Woodworking
Qty:
Part #:841-329-86996
- Extra Large Kneeling Pad
The GEARWRENCH® Kneeling Pad is the super convenient way to keep your knees comfortably off of a hard or rough floor. A built in grab handle makes it easy to position or hang up when not in use. Three layers of high-density solvent resistant foam provide an unmatched degree of cushioning so you can get the job done in comfort. A magnetized recess holds nuts, bolts, and spare parts.
Qty:
Part #:500125
- 14.1oz Map-Pro Hand Torch Cylinder
The Bernzomatic® 14.1 oz MAP-Pro® Hand Torch Cylinder enables you to complete tasks faster and more efficiently using a higher burn temperature than standard propane. MAP-Pro is premium fuel suited for a variety of job site projects including soldering large copper pipes, brazing and heat treating. The durable steel cylinder is the slim and lightweight for easy gripping and maneuvering. This product is compatible with our Digital Fuel Gauge to easily measure how much fuel is remaining in the cylinder. MAP-Pro fuel has an in-air flame temperature of 3,730 degrees Fahrenheit.
Qty:
Part #:502597
- Spark Lighter
The Bernzomatic® Spark Lighter is used to quickly ignite manual-start torches and appliances fueled by Bernzomatic Propane or Bernzomatic MAP-Pro gas, such as the Bernzomatic Classic Brass Torch, Brazing Torch or Outdoor Blaze Torch. This easy-to-use Spark Lighter is designed for convenient, one-handed operation. Flints are replaceable.
Qty:
Part #:501561
- Classic Brass Torch
The Bernzomatic® Classic Brass Torch has a durable, brass construction and an adjustable, pencil flame profile. This versatile, manual-ignition torch works best for basic projects including small diameter soldering and thawing frozen locks and pipes. For optimal performance, use upright. This torch is compatible with Bernzomatic Propane fuel, sold separately. Limited 3-Year Warranty.
Qty:
Part #:510952
- Jumbo Torch JT680The Bernzomatic® Jumbo Torch is a manual-ignition torch with an adjustable, wide pencil flame, making it ideal for a variety of projects. It is best used for DIY plumbing, small to medium diameter soldering and thawing frozen locks and pipes. For optimal performance, use upright. This torch is compatible with Bernzomatic Propane fuel. Limited 3-Year Warranty.
Adjustable, Wide Pencil Flame
Qty:
Part #:811450
- 1/2" Drive 1/2" F x 3/8" M Impact Adapter (Replaces Williams BS-131-BA
GEARWRENCH offers a wide range of impact products in open stock & sets that are designed to deliver the performance and strength that the professional users require. They are made from chrome molybdenum alloy steel for exceptional strength and durability. Our sockets have a manganese phosphate coating to resist corrosion. The sockets also feature highly visible laser etched markings and a secondary size hard stamping. The sockets feature off-corner loading to reduce fastener rounding. The GEARWRENCH impact product family will allow the professional user to FORGE AHEAD.
Qty:
Part #:841-329-80430
- 3/8" Drive Hex Bit Metric Socket 9mm
GEARWRENCH bit sockets have heat treated alloy steel base sockets for durability and long tool life. Our bits are manufactured from S2 steel for maximum strength. The hex bit sockets help users loosen & tighten internal hex fasteners.
Qty:
Part #:841-185-WE1010NA
- For many reasons, the Weller WE 1010 soldering station is a smart soldering solution for several different types of jobs. If you want a powerful tool that gets the job done quickly and reliably, try the WE 1010. This unit has many advantages, but some of its main draws are its
Power With the WE1010NA digital soldering station, you'll have exceptional power to get the job done fast. As the most powerful soldering station in its class, the 120V, 70W power station helps you work efficiently, reliably and precisely. With 40 percent more power than the WES / WESD station, the WEP 70 soldering iron heats up faster and has a shorter recovery time, which helps you produce high-quality results and get more done every time.
Ease of use The WE 1010 is extraordinarily user-friendly. The controls are designed to be intuitive, and the iron features an ergonomic design that's easier to control. The power station features an easy-to-read LCD screen, three push buttons and a power switch on the front of the unit. The iron is lightweight and features a pencil design that makes for comfort and easy maneuvering.
Precision When you use this product, you'll be able to more easily deliver consistently high-quality results. The smooth handling and control that the WEP 70 soldering iron offers and its user-friendly controls contribute to this quality. The excellent temperature stability and accuracy of the unit have a significant impact as well. Additionally, you can use a range of tips and temperatures to reliably get the exact results you need.
Safety WE1010NA has numerous features that will reduce potential hazards throughout your workday. It features a reinforced safety rest that provides extra stability when storing the iron between uses. The cables of the iron are also heat-resistant and meet industry standards for mechanical strength. The unit is also ESD safe and UL and CE certified for electrical safety.
Cost efficiency Despite having all of these incredible features, the WE 1010 is an extremely cost-effective tool. It's an affordable soldering iron overall and also contains elements meant to help you save money as you use it. The ET tips that the iron uses have an extremely long life, which significantly reduces operational costs. It also has a standby mode that the iron automatically enters into when not in use, which helps reduce energy use and further extend the life of your tips.
$
269.59
Qty:
Part #:841-193-7679038
- 020418224010
Swaging Tools, 1/8 in - 3/16 in Rope
Campbell® Swaging ToolsProduct DetailsFor swaging ferrules onto wire rope or cableDo Not use on coated cableIf used on coated cable, remove the coating from the assembly area
Qty:
Qty:
Part #:841-182-PQR1316N
- Country of Origin PEOPLE'S REPUBLIC OF CHINA HAZMAT Item NO Special Order Item NO State Restricted NO:
Qty:
Part #:841-192-CDS12N
- Product Category HAND TOOLS/Product Subcategory SOCKETS RATCHETS ADAPTORS & EXTENSIONS
Qty:
Part #:841-403-30209
- Superchuck Ball Bearing Chucks, K30
Jacobs Chuck® Superchuck Ball Bearing ChucksProduct DetailsBall bearing construction maximizes gripping force and drilling accuracyJaws center-ground for straightness and alignmentOne-piece sleeve eliminates crack between driving teeth often found in other designsThrough-hardened sleeve teeth plus hardened nose and keyholes provide outstanding wear resistanceFluted sleeve standard
Qty:
Part #:841-403-30598
- Country of Origin PEOPLE'S REPUBLIC OF CHINA HAZMAT Item NO Special Order Item NO State Restricted NO:
Qty:
Part #:690-5413205
- 2" Anchor Shackle, Screw Pin, Forged Carbon Steel, Painted Blue
Shackle Bodies Are Drop-Forged Carbon Steel
Self Colored (Painted Blue)
C-419-S Shackles Meet the Design Requirements of Federal Specification RR-C-271, Type IVA, Grade A, Class 2
Working Load Limit, Size, Manufacture Name, Date Code and USA Permanently Marked on Each Shackle
Statistically Tested for Impact Resistance, Tensile Strength, Hardness, Ductility and Fatigue
419 Series Shackles Meet or Exceed All Manufacturing Requirements of the ASME B30.26 &rdquoRigging Hardware&rdquo. These Include the Material Ductility Requirement (Section 26-1.1.2), the Design Factor Requirement (Section 26.1.2), the Identification Requirement (Section 26-1.5.1), and the Effective Temperature Range (Section 26-1.6.1). The Shackles Can Be Proof Tested in Accordance with Section 26-1.4 Upon Request
Certification Available Upon Request
6 to 1 Design Factor
Pins and Bolts Are Heat-Treated and Made of Alloy Steel
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:690-5410895
- 1/2" Alloy Anchor Shackle, Screw Pin, Forged Alloy, Galvanized
Shackle Bodies Are Drop-Forged Alloy Steel
Galvanized to Meet ASTM A-153 Specifications
A-419-G Shackles Meet the Design Requirements of Federal Specification RR-C-271, Type IVA, Grade B, Class 2
Working Load Limit, Size, Manufacture Name, Date Code, "CE" Mark, and USA Permanently Marked on Each Shackle
Statistically Tested for Impact Resistance, Tensile Strength, Hardness, Ductility and Fatigue
419 Series Shackles Meet or Exceed All Manufacturing Requirements of the ASME B30.26 &rdquoRigging Hardware&rdquo. These Include the Material Ductility Requirement (Section 26-1.1.2), the Design Factor Requirement (Section 26.1.2), the Identification Requirement (Section 26-1.5.1), and the Effective Temperature Range (Section 26-1.6.1). The Shackles Can Be Proof Tested in Accordance with Section 26-1.4 Upon Request
Certification Available Upon Request
5 to 1 Design Factor
Pins and Bolts Are Heat-Treated and Made of Alloy Steel and Painted Orange
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:690-5411295
- 3/4" Alloy Anchor Shackle, Screw Pin, Forged Alloy, Galvanized
Shackle Bodies Are Drop-Forged Alloy Steel
Galvanized to Meet ASTM A-153 Specifications
A-419-G Shackles Meet the Design Requirements of Federal Specification RR-C-271, Type IVA, Grade B, Class 2
Working Load Limit, Size, Manufacture Name, Date Code, "CE" Mark, and USA Permanently Marked on Each Shackle
Statistically Tested for Impact Resistance, Tensile Strength, Hardness, Ductility and Fatigue
419 Series Shackles Meet or Exceed All Manufacturing Requirements of the ASME B30.26 &rdquoRigging Hardware&rdquo. These Include the Material Ductility Requirement (Section 26-1.1.2), the Design Factor Requirement (Section 26.1.2), the Identification Requirement (Section 26-1.5.1), and the Effective Temperature Range (Section 26-1.6.1). The Shackles Can Be Proof Tested in Accordance with Section 26-1.4 Upon Request
Certification Available Upon Request
5 to 1 Design Factor
Pins and Bolts Are Heat-Treated and Made of Alloy Steel and Painted Orange
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:690-5411695
- 1" Alloy Anchor Shackle, Screw Pin, Forged Alloy, Galvanized
Shackle Bodies Are Drop-Forged Alloy Steel
Galvanized to Meet ASTM A-153 Specifications
A-419-G Shackles Meet the Design Requirements of Federal Specification RR-C-271, Type IVA, Grade B, Class 2
Working Load Limit, Size, Manufacture Name, Date Code, "CE" Mark, and USA Permanently Marked on Each Shackle
Statistically Tested for Impact Resistance, Tensile Strength, Hardness, Ductility and Fatigue
419 Series Shackles Meet or Exceed All Manufacturing Requirements of the ASME B30.26 &rdquoRigging Hardware&rdquo. These Include the Material Ductility Requirement (Section 26-1.1.2), the Design Factor Requirement (Section 26.1.2), the Identification Requirement (Section 26-1.5.1), and the Effective Temperature Range (Section 26-1.6.1). The Shackles Can Be Proof Tested in Accordance with Section 26-1.4 Upon Request
Certification Available Upon Request
5 to 1 Design Factor
Pins and Bolts Are Heat-Treated and Made of Alloy Steel and Painted Orange
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:690-0510426
- Country of Origin US:
Qty:
Part #:690-T9640835
- 1/2" Anchor Shackle, Screw Pin, Hot Galvanized
Drop-Forged Carbon Steel
WLL Marked on Each Shackle
UPC Tagged
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:690-5411095
- Country of Origin UNITED STATES:
Qty:
Displaying: 1 - 24 of 48 Matching Items