Imark/edn Milwaukee Electric
Armstrong International
View:
Active Filters :
Part #:500993
- Makes replacement, high performance O-rings in less than a minute. This compact kit contains four 3-foot lengths of common diameters of Buna N (nitrile) cord, LOCTITE® 404® Quick Set&trade Instant Adhesive, O-ring fixture, blade, a waterproofing solution, and a cleanup solution. Cut and splice tool and standard size cord stock are available. Included Cord Sizes 3/32 in., 1/8 in., 3/16 in., 1/4 in.
1 oz. waterproofing solution
# 74126 1 oz. cleanup solvent,
# 75326 1/3 oz. 404® Quick Set&trade instant adhesive,
# 46551 Fixture and cutting blade
98613 Precision O-Ring Cut & Splice Tool
8900591 O-Ring Stock, Buna N, 1/4 in. x 3 ft.
8900589 O-Ring Stock, Buna N, 1/8 in. x 3 ft.
8900588 O-Ring Stock, Buna N, 3/32 in. x 3 ft.
8900590 O-Ring Stock, Buna N, 3/16 in. x 3 ft.
Qty:
Part #:507247
- Technical Information
Agency Approvals / Specifications
UL
Application Method
Dispense System, Manual
Applications
Pipe Sealing, Thread Sealing
Breakaway Torque, Steel M10
12.0 N·m (110.0 in./lb. )
Color
White Off White
Cure Type
Anaerobic Cure
Key Characteristics
Immediate Low Pressure Sealing, Oil Tolerant, Strength Low Strength, Temperature High Temperature, Thixotropic
Operating Temperature
-55.0 - 200.0 °C (-65.0 - 400.0 °F )
Physical Form
Paste
Substrates
Metal, Metal Aluminum, Metal Steel - Galvanized Steel, Metal Steel - Stainless Steel, Thread Type Coarse, Thread Type Tapered
Technology
Acrylic
Viscosity, 20 RPM
540000.0 mPa·s
$
100.98
Qty:
Part #:506000
- Technical Specs Item Gasket Sealant Type Slow Dry Flexible Cure Size 7 oz Color Black Temp. Range -65F to 400 Degrees F Specific Gravity 1.5 Viscosity Paste Full Cure Remains Tacky Begins to Harden 4 hr Substrates Excellent for Sealing Flexible Metal to Metal Assemblies Characteristics Oil Resistant Application Cover Plates, Hose Connections, Valve Cover and Oil Pan Gaskets
$
15.20
Qty:
Part #:508141
- Technical Specs Item Instant Adhesive Materials Bonded Metal, Plastic Begins to Harden - Adhesives 15 sec Viscosity - Adhesives 150 to 450 cPs Container Type - Adhesives Tube Container Size - Adhesives 3 g Adhesive Color Clear Series 454 Gap Fill 0.01 in Functional Cure Not Specified Full Cure 24 hr Temp. Range -65 Degrees to 250 Degrees F Specific Gravity 1.05 Chemical Type Cyanoacrylate VOC Content 20g/L Characteristics General purpose, bonds a variety of porous surfaces Tensile Strength 3200 psi Standards 29 CFR 1910.1200 Application For Difficult to Bond Surfaces, Irregular Rough and Acidic Surfaces, Use on Porous Substrates
$
8.22
Qty:
Part #:521246
- Technical Specs Item Instant Adhesive Materials Bonded Metal, Plastic, Rubber Begins to Harden - Adhesives 15 sec Viscosity - Adhesives 90 cPs Container Type - Adhesives Bottle Container Size - Adhesives 20 g Adhesive Color Clear Series 401 Gap Fill 0.005 in Functional Cure Not Specified Full Cure 24 hr Temp. Range -65 Degrees to 250 Degrees F Specific Gravity 1.05 Chemical Type Cyanoacrylate VOC Content 20g/L Characteristics Resealable Squeeze Package Tensile Strength 3200 psi Standards 29 CFR 1910.1200, CFIA Application Bonds A Wide Range Of Materials Including Metals, Plastics, and Elastomers
$
30.19
Qty:
Part #:521020
- Product details Legacy part 51005 10 oz Brush Top Can Exclusive Formula Suspends Copper and Graphite in a High-Quality Grease Protects Metal Parts From Corrosion, Galling and Seizing at Temps to 1800 °F Use On Metals, Plastics and Non-Metallic Gaskets description Exclusive formula suspends copper and graphite in a high-quality grease. applications Electrically conductive Aluminum Soft metals features Protects metal from rust and corrosion Resists seizing and galling Temperatures to 1,800 F (982 C) CARB Complies with VOC regulations as detailed by the California Air Resource Board OTC Complies with VOC regulations as detailed by the Ozone Transport Commission Mil-PRF907-F CFIA approved Equipment associated with petroleum chemicals, steel mills, paper plants, marine and foundries
$
31.92
Qty:
Part #:521212
- Technical Specs Item Pipe Thread Sealant Size 50 mL Container Type Tube Chemical Type Dimethacrylate Ester Strength Medium Color White Gas Pressure Range 10,000 psi Begins to Harden 24 hr Application Temp. Range 72 Degrees F Performance Temp. Range -65 Degrees to 400 Degrees F Flash Point 199.94 Degrees F Specific Gravity 1.21 @ 25 Degrees C Viscosity 350,000cP For Use With NF Application Thread sealing
$
24.67
Qty:
Part #:516691
- Technical Specs
Patching Application Mortars and Patching Cements Item Flooring/Grouting Concrete Repair Color Gray Number of Components 2 Container Size 1 gal Container Style Pail Coverage 4.8 sq ft VOC Less Than 1.0%, 10g/L Flash Point Greater Than 212 Degrees F Starts to Harden Not Specified Full Cure Time Not Specified For Use On Surface Material Concrete, Glass, Steel, Wood Application 000 PSI, Chemically Resistant, Compressive Strength 13, Rapid Setting, Summer and Winter Additives Also Available to Aid Cure Times Characteristics 2-Part, Rapid Set Time Meets OSHA Cured Color Family Grays
Qty:
Part #:201554
- Barricade Safety Tapes 2 Mil Caution Tape 3" Wide x 1,000ft
&bull Rolls are individually labeled with UPC code&bull 2" Black characters on 3" wide yellow tape unless indicated.&bull Ask us about other legends and sizes available&bull Boxed packaging
Qty:
Part #:220175
- Flat Boring Bit 6" Universal Set - 8PC
Get added convenience and reach with the Milwaukee® 8-Piece 6" Universal QUIK-LOK&trade Flat Boring Bit Set. Bore small, clean holes at any angle in a variety of materials. The double wing spurs provide easy hole formation while reducing vibration and preventing "break out." The patented cutting edge produces easier and faster wood boring and fast chip removal, allowing heat from the bit to dissipate. The Universal QUIK-LOK&trade allows quick and easy accessory changes, as well as added reach in hard-to-work areas. The kit includes 3/8", 1/2", 5/8", 3/4", 7/8", 1" and 1-1/8" bits plus a 6" QUIK-LOK Extension in a carrying case.
Qty:
Part #:805360
- 12" 10/14 TPI SAWZALL® Blades (5 Pk)
Milwaukee® designs and manufactures SAWZALL® blades for the toughest professional applications. Material, blade geometry and heat treating are designed to maximize general purpose cutting performance.
Qty:
Part #:729-2759-22
- M18 FUEL&trade with ONE-KEY&trade 1/2" Compact Impact Wrench w/ Pin Detent Kit (Discontinued, Replaced by 2759-20)
The M18 FUEL&trade 1/2&rdquo Compact Impact Wrench is the Most Powerful tool in its class, delivering up to 220 ft-lbs of torque in a compact design. The POWERSTATE&trade Brushless Motor not only provides unmatched power, but also greater efficiency, delivering up to 25% more run-time than the leading competitors. REDLINK PLUS&trade Intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. REDLITHIUM&trade Batteries deliver more work per charge and more work over the life of the pack than competitive batteries on the market.Compatible with ONE-KEY&trade, this is the industry&rsquos first Impact Wrench that wirelessly connects to a smart phone to Customize, Track and Manage a tool&rsquos performance and location. Unlimited Tool Customization allows you to connect to the tool and access predetermined set-ups for specific fasteners and materials, or have complete control over output speed and power for the specific application at hand. Once the desired output performance is reached, the custom profile is then saved to the memory of the tool and the connection to the smart phone is no longer necessary. The tool&rsquos memory supports up to 4 custom profiles that can be easily accessed with the touch of a button on the tool. Your custom profiles are also saved in the cloud so that they can be accessed at any time. Integrated Tool Tracking, also available through ONE-KEY&trade, provides full visibility to how and where tools are being used across your network of jobs and users. The app will track all ONE-KEY&trade compatible devices within 100 ft range of your phone. By building the functionality into the tool, not the battery, all devices are trackable even if the battery is not charged or on the tool. The app will automatically keep records of the last time a tool was within range of the app, allowing you to pinpoint missing tools quicker and increase accountability of your crew. If you&rsquore having trouble locating a lost tool, expand your search with the help of anybody with the ONE-KEY&trade app. By opting in, when any phone with the app comes within 100 ft of your tool, you will receive an updated location
Qty:
Part #:504526
- Technical Specs Item RTV Silicone Sealant Type Shrink-Resistant for Precut Gaskets Size 300 mL Color Blue Temp. Range -65 to 500 Degrees F Specific Gravity 1.04 Flash Point 199.4 Degrees F Full Cure 24 hr Begins to Harden 10 min Application Coat Pre-cut Gaskets for Increased Reliability
Qty:
Part #:507497
- Technical Specs Item RTV Silicone Sealant Type High Temp. Size 80 mL Color Red Temp. Range -75 to 600 Degrees F Specific Gravity 1.01 Flash Point 199.4 Degrees F Full Cure 24 hr Begins to Harden 10 min Application Coat Pre-cut Gaskets for Increased Reliability
Qty:
Part #:505834
- Technical Specs
Item RTV Silicone Sealant Type High Temp. Size 300 mL Color Red Temp. Range -75 to 600 Degrees F Specific Gravity 1.01 Flash Point 199.4 Degrees F Full Cure 24 hr Begins to Harden Not Specified Application Fills Gaps to 0.25 in Between Parts that are Mated
$
50.09
Qty:
closeout
$203.00 MSRP
$
144.21
Part #:507361
- Availability: Will be backordered (Typically arrives in 10 days)
- 7.5 Amp 4-1/2" Small Angle Grinder (Discontinued, Being Replaced by 6141-30)
The 6140-30 4-1/2" 7.5 Amp Small Angle Grinder delivers performance, durability and ease-of-use features for industrial users. The X-large paddle switch with lock-on provides increased comfort and ease-of use when operating the grinder in various positions. Milwaukee's built in advanced airflow system, including Debris Baffles and Multi-Port Exhaust, extends tool life. 25% longer lasting epoxy motor protection extends tool life by protecting the copper wires from abrasion. The tool-free burst resistant guard allows the user to quickly adjust the guard without the use of a tool.
Qty:
closeout
$494.00 MSRP
$
360.00
Part #:805309
- CLOSEOUTS Only 2 Left!
- M18&trade 1/2" Compact Hammer Drill/Driver Kit (Discontinued, Replaced by 2607-22CT Our Number 805306)
The most Hammer Drill/Driver in its class is more powerful than the competition. Built with a Milwaukee® 4-Pole frameless motor, the M18&trade 1/2" Hammer Drill/Driver delivers 525 in-lbs of torque and up to 1,800 RPM. At only 7-3/4" length, this drill driver allows you access to the tightest work spaces. An all-metal gear case and 1/2" metal chuck provide maximum durability, even on the most challenging worksites. REDLINK&trade Intelligence provides advanced protection in abusive situations and manages the tool's temperature to provide maximum life. The REDLITHIUM&trade Battery Pack delivers more work per charge and more work over pack life than the competitors. The kit includes two M18&trade XC REDLITHIUM&trade batteries, an M18&trade and M12&trade multi-voltage charger, and a carrying case.
Qty:
Part #:805467
- M18 FUEL&trade 1/2" High Torque Impact Wrench w/ Friction Ring
Our M18 FUEL&trade ½&rdquo High Torque Impact Wrench w/ Friction Ring is the most power-dense impact wrench in its class, provides greater access in tight spaces, and maximizes productivity through faster removal speeds. The POWERSTATE&trade Brushless Motor delivers up to 1,200 ft-lbs of Fastening Torque and 1,600 ft-lbs of Nut-Busting Torque when paired with our M18&trade REDLITHIUM&trade FORGE&trade Batteries, while the compact size at 7.6" in length gives users greater access in tight spaces. The M18 FUEL&trade ½&rdquo High Torque Impact Wrench w/ Friction Ring maximizes productivity on the jobsite and in the shop by removing stubborn bolts and fasteners faster than cordless competitors. Our patented battery isolation system provides a secure battery connection and controls vibration transmitted to the pack. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL&trade offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF&trade control applies no more than 50 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers our users full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. The ½&rdquo Friction Ring design allows for quick & tool-free socket changes.
Qty:
Part #:276722
- M18 FUEL&trade High Torque ½&rdquo Impact Wrench with Friction Ring Kit (Replaces 2767-22 & 2767-22R)
Our M18 FUEL&trade 1/2" High Torque Impact Wrench with Friction Ring eliminates the need to use a pneumatic tool for those stubborn and rusted bolts by delivering 1,000 ft-lbs of fastening torque and 1400 ft-lbs of nut-busting torque. With 2X faster removal speed, our users will be able to get the job done faster and be more productive throughout their day. By providing the industry&rsquos most compact cordless High Torque Impact Wrench at 8.39&rdquo in length, this tool allows for more access in tight spaces. 4-Mode DRIVE CONTROL&trade with Bolt Removal mode gives our users the most control over their fasteners. Bolt Removal mode gives the user more control when removing fasteners by slowing to 750rpm once the fastener has been busted loose. Our tool offers quick, tool-free socket changes with a 1/2 in. friction ring anvil. A premium rubber overmold material gives our users ultimate comfort during prolonged use while lasting longer against corrosive materials. Our M18 REDLITHIUM&trade XC5.0 Extended Capacity Resistant Battery Packs included provide increased protection against oils, greases, and solvents.
Qty:
$
26.89
Qty:
Part #:503330
- Technical Specs Item Threadlocker Threadlocker Classification Threadlocker Threadlocker Strength Medium Threadlocker Color Blue Threadlocker Disassembly Removable Physical Form Liquid Threadlocker Container Bottle Size 10 mL Chemical Type Anaerobic For Fastener Dia. 1/4 in to 3/4 in Begins to Harden 5 min Series 242 Gap Fill 0.005 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Greater Than 93.3 Degrees C Specific Gravity 1.1 Viscosity 1,200 to 5,000 cP Removable With Hand Tools Application Locking Nuts and Bolts 1/4 in to 3/4 in . Removable With Hand Tools. Standards ASTM-D5363 Group 3 Class 2 Grade 1, CFIA, MIL-S-46163A Type II Grade N, NSF P1, OSHA Hazard Communication, RoHS Compliant Green Certification or Other Recognition NSF(R) Certified (Sustainability or Environmental Standard) Technical Specs Item Threadlocker Threadlocker Classification Threadlocker Threadlocker Strength Medium Threadlocker Color Blue Threadlocker Disassembly Removable Physical Form Liquid Threadlocker Container Bottle Size 10 mL Chemical Type Anaerobic For Fastener Dia. 1/4 in to 3/4 in Begins to Harden 5 min Series 242 Gap Fill 0.005 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Greater Than 93.3 Degrees C Specific Gravity 1.1 Viscosity 1,200 to 5,000 cP Removable With Hand Tools Application Locking Nuts and Bolts 1/4 in to 3/4 in . Removable With Hand Tools. Standards ASTM-D5363 Group 3 Class 2 Grade 1, CFIA, MIL-S-46163A Type II Grade N, NSF P1, OSHA Hazard Communication, RoHS Compliant Green Certification or Other Recognition NSF(R) Certified (Sustainability or Environmental Standard) Technical Specs Item Threadlocker Threadlocker Classification Threadlocker Threadlocker Strength Medium Threadlocker Color Blue Threadlocker Disassembly Removable Physical Form Liquid Threadlocker Container Bottle Size 10 mL Chemical Type Anaerobic For Fastener Dia. 1/4 in to 3/4 in Begins to Harden 5 min Series 242 Gap Fill 0.005 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Greater Than 93.3 Degrees C Specific Gravity 1.1 Viscosity 1,200 to 5,000 cP Removable With Hand Tools Application Locking Nuts and Bolts 1/4 in to 3/4 in . Removable With Hand Tools. Standards ASTM-D5363 Group 3 Class 2 Grade 1, CFIA, MIL-S-46163A Type II Grade N, NSF P1, OSHA Hazard Communication, RoHS Compliant Green Certification or Other Recognition NSF(R) Certified (Sustainability or Environmental Standard) Technical Specs Item Threadlocker Threadlocker Classification Threadlocker Threadlocker Strength Medium Threadlocker Color Blue Threadlocker Disassembly Removable Physical Form Liquid Threadlocker Container Bottle Size 10 mL Chemical Type Anaerobic For Fastener Dia. 1/4 in to 3/4 in Begins to Harden 5 min Series 242 Gap Fill 0.005 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Greater Than 93.3 Degrees C Specific Gravity 1.1 Viscosity 1,200 to 5,000 cP Removable With Hand Tools Application Locking Nuts and Bolts 1/4 in to 3/4 in . Removable With Hand Tools. Standards ASTM-D5363 Group 3 Class 2 Grade 1, CFIA, MIL-S-46163A Type II Grade N, NSF P1, OSHA Hazard Communication, RoHS Compliant Green Certification or Other Recognition NSF(R) Certified (Sustainability or Environmental Standard) Technical Specs Item Threadlocker Threadlocker Classification Threadlocker Threadlocker Strength Medium Threadlocker Color Blue Threadlocker Disassembly Removable Physical Form Liquid Threadlocker Container Bottle Size 10 mL Chemical Type Anaerobic For Fastener Dia. 1/4 in to 3/4 in Begins to Harden 5 min Series 242 Gap Fill 0.005 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Greater Than 93.3 Degrees C Specific Gravity 1.1 Viscosity 1,200 to 5,000 cP Removable With Hand Tools Application Locking Nuts and Bolts 1/4 in to 3/4 in . Removable With Hand Tools. Standards ASTM-D5363 Group 3 Class 2 Grade 1, CFIA, MIL-S-46163A Type II Grade N, NSF P1, OSHA Hazard Communication, RoHS Compliant Green Certification or Other Recognition NSF(R) Certified (Sustainability or Environmental Standard)
$
21.20
Qty:
Part #:506991
- Technical Specs Item Threadlocker Threadlocker Classification Threadlocker Threadlocker Strength Medium Threadlocker Color Blue Threadlocker Disassembly Removable Physical Form Liquid Threadlocker Container Bottle Size 50 mL Chemical Type Anaerobic For Fastener Dia. 1/4 in to 3/4 in Begins to Harden 5 min Series 242 Gap Fill 0.005 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Greater Than 93.3 Degrees C Specific Gravity 1.1 Viscosity 1,200 to 5,000 cP Removable With Hand Tools Application Locking Nuts and Bolts 1/4 in to 3/4 in . Removable With Hand Tools. Standards ASTM-D5363 Group 3 Class 2 Grade 1, CFIA, MIL-S-46163A Type II Grade N, NSF P1, OSHA Hazard Communication, RoHS Compliant Green Certification or Other Recognition NSF(R) Certified (Sustainability or Environmental Standard) Technical Specs Item Threadlocker Threadlocker Classification Threadlocker Threadlocker Strength Medium Threadlocker Color Blue Threadlocker Disassembly Removable Physical Form Liquid Threadlocker Container Bottle Size 50 mL Chemical Type Anaerobic For Fastener Dia. 1/4 in to 3/4 in Begins to Harden 5 min Series 242 Gap Fill 0.005 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Greater Than 93.3 Degrees C Specific Gravity 1.1 Viscosity 1,200 to 5,000 cP Removable With Hand Tools Application Locking Nuts and Bolts 1/4 in to 3/4 in . Removable With Hand Tools. Standards ASTM-D5363 Group 3 Class 2 Grade 1, CFIA, MIL-S-46163A Type II Grade N, NSF P1, OSHA Hazard Communication, RoHS Compliant Green Certification or Other Recognition NSF(R) Certified (Sustainability or Environmental Standard)
$
60.41
Qty:
Part #:506992
- Technical Specs
Item Threadlocker Threadlocker Classification Threadlocker Threadlocker Strength High Threadlocker Color Red Threadlocker Disassembly Permanent Physical Form Liquid Threadlocker Container Bottle Size 50 mL Chemical Type Anaerobic For Fastener Dia. Up to 3/4 in Begins to Harden 10 min Series 262 Gap Fill 0.005 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Greater Than 93.3 Degrees C Specific Gravity 1.05 Viscosity 1,800 to 5,000 cP Removable With Heat and Hand Tools Application Chemical Conditions, Heavy Shock and Vibration Applications. High Strength Requires Heat and/or Special Tools For Removal, Locking Bolts Up to 3/4 in . For Extreme Environmental Standards MIL-S-46163A Type II Grade 0, OSHA Hazard Communication, RoHS Compliant
$
60.41
Qty:
Part #:509136
- Technical Specs Item Wicking Grade Threadlocker Threadlocker Classification Wicking Grade Threadlocker Threadlocker Strength Medium Threadlocker Color Green Threadlocker Disassembly Removable Physical Form Liquid Threadlocker Container Bottle Size 50 mL Chemical Type Anaerobic For Fastener Dia. Up to 1/2 in Begins to Harden 20 min Series 290 Gap Fill 0.003 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Greater Than 93.3 Degrees C Specific Gravity 1.07 Viscosity 25 to 55 cP Removable With Hand Tools Application For Locking Preassembled Fasteners No. 2 to 1/2 in . Penetrates By Capillary Action Standards MIL-S-46163A Type III Grade R, NSF P1/ANSI 61 Certified, OSHA Hazard Communication, RoHS Certified
$
57.02
Qty:
Displaying: 1 - 24 of 2,226 Matching Items