Carborundum
Avery Products Corp
View:
Active Filters :
- Brand: Avery Products Corp Carborundum
Part #:507472
- Carborundum Aluminum Oxide Resin Cloth Sheets, Aluminum Oxide Cloth, P240
Product DetailsSuperior conformability to complex surfaces and better finishes
Qty:
Part #:507707
- Area of ApplicationArcal Weld-O is a ready-to-use X-Ray quality welding prep for aluminum and all grades of aluminum alloys. Weld-O is an innovative chemical formulation that consists of a blend of mineral acids, surface active and sequestering agents and degreasers.
Weld-O deoxidizes the surface instantly and conditions the surface for X-ray quality welding. The weld joint is cleaner and stronger. By using Weld-O, the need for wire brushing and other time consuming cleanup procedures are eliminated. A simple water rinse may be done but in many cases is not required.
Qty:
Part #:501754
- Silicon Carbide Paper Sheets Better Tier / Silicon Carbide Resin Waterproof Paper
Exceptional finishing in wet applications.
BF 0416 W
Qty:
Part #:501742
- Silicon Carbide Paper Sheets Good Tier / Silicon Carbide Resin Waterproof Paper
May be used wet or dry on plastic or painted surfaces. Best results are obtained when used wet.Excellent for machine and hand rubbing of lacquer, urethane and varathane between coats. Ideal forobtaining fine finishes and feather-edging painted surfaces.
Qty:
closeout
$7.74 MSRP
$
3.50
Part #:500702
- CLOSEOUTS Only 75 Left!
- Silicon Carbide Sandscreen SheetsGood Tier / Silicon Carbide Waterproof Resin Sandscreen
Features &bull Black, silicon carbide abrasive&bull P-graded in 220 and coarser grits &bull Full resin bond system &bull Screen backing &bull Both sides are usable
Benefits
&bull Very sharp and hard, but brittle
&bull Provides consistent finishes
&bull Maximum grain adhesion
&bull Load resistant
Qty:
Part #:500975
- Aluminum Oxide Cloth Rolls Good Tier / Aluminum Oxide Resin Cloth
Ideal for cleaning and deburring metal surfaces. May be used dry or with oil.
Part #:507583
- Aluminum Oxide Cloth Rolls Good Tier / Aluminum Oxide Resin ClothIdeal for cleaning and deburring metal surfaces. May be used dry or with oil.
JCF 0852
Qty:
Part #:507471
- Aluminum Oxide Cloth Sheets Good Tier / Aluminum Oxide Resin Cloth
Ideal for hand sanding, deburring, polishing and removing cutting tool marks on all metal parts.
JCF 0852
Qty:
Part #:507465
- Aluminum Oxide Cloth Sheets Good Tier / Aluminum Oxide Resin Cloth
Ideal for hand sanding, deburring, polishing and removing cutting tool marks on all metal parts.
JCF 0852
Qty:
Part #:504491
- Aluminum Oxide Narrow Belts Good Tier / Aluminum Oxide Resin Waterproof Cloth
Ideal for operations requiring a belt specification that does not generate heat, but is capable of sandinga variety of materials. Closed coat for fast metal removal.
Qty:
Part #:507452
- Silicon Carbide Paper Sheets Better Tier / Silicon Carbide Resin Waterproof Paper
Exceptional finishing in wet applications
BF 0416 W
Qty:
Part #:505674
- Fibrate x Non-Woven Hand Pads Good Tier / Aluminum Oxide, Silicon Carbide, or Non-Abrasive
Very fine, aluminum oxide pads for general cleaning and finishing, removal of rust and oxidation from metals, and lightlysanding old paint or new primers. No color bleeding when working with solvents. 84700 is perforated to create two smaller4-1/2" x 6" pads.
Fibrate x Non-Woven Hand PadsGood Tier / Aluminum Oxide, Silicon Carbide, or Non-Abrasive
Very Fine A/O Gen. Purp. Maroon
Qty:
Part #:500847
- Green &ndash 05539579600 A very fine grit aluminum oxide pad for general clean-up as well as finishing stainless steel.
Fibrate x Non-Woven Hand PadsGood Tier / Aluminum Oxide, Silicon Carbide, or Non-Abrasive
Fibratex products are a non-woven nylon web impregnated with abrasive grain and resin bond. They arenon-metallic, won't rust, and are ideal as replacements for steel wool and/or wire brushes.
Qty:
Part #:841-481-05539510797
- Carborundum Silicon Carbide Waterproof Paper SheetsProduct DetailsBest results are obtained when used wetExcellent for machine and hand rubbing of lacquer, urethane and varathane between coatsMay be used wet or dry on plastic or painted surfaces
Qty:
Part #:501070
-
3-1/2" x 5"
Rectangle
White
Laser
Permanent-Adhesive
50 Sheets
4 Labels per Sheet
200 Total Labels
$
46.60
Qty:
Part #:501073
-
2" x 2"
Rectangle
White
Laser
Permanent-Adhesive
50 Sheets
12 Labels per Sheet
600 Total Labels
$
46.60
Qty:
Part #:506512
-
Specifications
Abrasive Material
Aluminum Oxide
Applications
Deburring
Body Material
Cloth
Brand
CARBORUNDUM
Country of Origin
FR
Grit
P80
Hazmat
NO
Height [Nom]
2.6 in
Length [Nom]
50 yd
Quantity
1 per pack
Type
Rolls
Width [Nom]
2 in
Wt.
3.45 lb
Qty:
Part #:508973
Qty:
Part #:800613
- Aluminum Oxide Cloth Rolls Good Tier / Aluminum Oxide Resin Cloth
Ideal for cleaning and deburring metal surfaces. May be used dry or with oil.
2" x 50 Yards &ndash Economy Rolls
Grading P50
XC 0851
Qty:
Part #:501546
- Bench and Pedestal Wheels Good Tier / Aluminum Oxide
Ideal for removing burrs on steel parts, as well as sharpening high-speed steel cutting tools.Note arbor hole reducing bushings included.
Max RPM 2,705
For Steel/Metal
Qty:
Part #:508490
- Bench and Pedestal Wheels Good Tier / Aluminum Oxide
Ideal for removing burrs on steel parts, as well as sharpening high-speed steel cutting tools.Note arbor hole reducing bushings included
36-M Grading
3,250 Max RPM
Qty:
Part #:510222
- Bench and Pedestal Wheels Good Tier / Aluminum Oxide
Ideal for removing burrs on steel parts, as well as sharpening high-speed steel cutting tools.Note arbor hole reducing bushings included.
For Steel/MetalType 01 &ndash For Bench and Pedestal Grinders
10" x 1-1/2" x 1-1/4" Grading 24-P max RPM 2,485
Qty:
Part #:507632
- Bench and Pedestal Wheels Good Tier / Aluminum Oxide
Ideal for removing burrs on steel parts, as well as sharpening high-speed steel cutting tools.Note arbor hole reducing bushings included.
For Steel/MetalType 01 &ndash For Bench and Pedestal Grinders
60-M
Max RPM 3,250
Qty:
Displaying: 1 - 24 of 129 Matching Items