Dixon Valve & Coupling Company Llc
Avery
View:
Active Filters :
Part #:511262
-
HDM Manual adhesive dispenser Manual dispenser HDM 500 + black cartr #3498241
Manual hybrid/epoxy adhesive anchor dispenser
Dispenser typeManual
$
292.49
Qty:
Part #:511296
-
HIT-Z Anchor rod Anchor rod HIT-Z 5/8" x 9-1/2" #2018448Material, corrosionCarbon steel, zinc-platedWrench/nut size15/16 inDrill bit diameter3/4 inBase materialsConcrete (cracked), Concrete (uncracked)PROFIS SoftwareYesApprovals / Test reportsICC-ES report (concrete)Cleaning proceduresNon CleaningType of fixingPre-fastening, Through-fasteningProduct ClassUltimate
Part #:511332
-
HIT-RE 500 V3 Epoxy anchor Epoxy adh RE 500-V3 11.1oz/330ml #2123401 Base materialsConcrete (cracked), Concrete (uncracked)Base material conditionDry, Submerged, Water-filled, WetApprovals / Test reportsICC-ES report (concrete)Seismic loadingYesPROFIS SoftwareYesClean-TecNoCleaning proceduresAutomatic Cleaning (SafeSet Hollow Drill Bit), Compressed-Air CleaningStorage and transportation temperature range41 - 77 °FIn-service temperature &ndash range-40 - 158 °FShelf life from date of manufacture (at 73°F/23°C and 50% relative humidity)12 monthsProduct informationThis product is subject to the Chemicals Prohibition Ordinance (ChemVerbotsV). It is to be used by professionals within the scope of their work and, in accordance with § 8 para. 3 no. 1 of the ChemVerbotsV, is to be used exclusively for its intended purpose as anchor adhesive, for rebar connections (typically steel-to-concrete and/or concrete-to-concrete connections), as well as for other intended fastening and uses within the scope of construction activities. Purchasers must comply with all existing legal requirements for the use of these products and may use them only as permitted. Information in the safety data sheets and operating instructions on the use of these products, the hazards associated with their use, the necessary safety measures during intended use and in the event of unforeseen spillage or release, and proper disposal must always be observed. The operating instructions and safety data sheets can be accessed in the detailed view of the products concerned at www.hilti.de in a format that can be saved and printed, and the operating instructions are enclosed with the products. Safety instructions Wear protective gloves/protective clothing/eye protection/face protection. Do not get in eyes, on skin or on clothing. In case of contact with eyes rinse thoroughly with water for several minutes. Remove contact lenses if possible, continue rinsing. If eye irritation, skin irritation or rash persist seek medical advice/attention. In case of contact with skin wash with plenty of soap and water. Disposal Completely emptied cartridges can be disposed of via the Dual System (yellow garbage can). Full/partially emptied containers are to be disposed of as special waste.Product ClassUltimate
$
81.77
Qty:
Part #:511442
- CSC-T12-1 - Convoluted Crimp Collar
Attributes
Weight
0.12 lb
Break Quantity
0
Optional Package/Box Quantity
0
Size
3/4"
Material
Carbon Steel
$
7.80
Qty:
Part #:511731
-
HDM Manual adhesive dispenser Manual dispenser HDM 500 + red cartr #3498242
Manual hybrid/epoxy adhesive anchor dispenser
Dispenser typeManual
$
292.49
Qty:
$
44.92
Qty:
Part #:511740
-
Cartridge holder red HIT-CR 500 #2007059
$
45.81
Qty:
Part #:600571
- Features&bull High flow performance featuringrugged design for the mostdemanding applications&bull Ideal for those installations calling forconstant pressure with wide variationin flow&bull Diaphragm operated design withbalanced poppet design for quick andaccurate regulation&bull Secondary aspiration plus balancedpoppet provides quick response andaccurate pressure regulation&bull Heavy duty tee handle adjustment&bull Reverse flow version available&bull High flow 1-1/2" 500 SCFM
$
240.17
Qty:
Part #:511451
- FJC-T12 - True I.D. Female JIC Swivel
Attributes
Weight
0.26 lb
Break Quantity
0
Optional Package/Box Quantity
0
Size
3/4"
Material
Carbon Steel
$
13.06
Qty:
Part #:511331
-
HIT-HY 200-A V3 Adhesive anchor (New Verision)
Ultimate-performance injectable hybrid mortar with approvals for anchoring structural steel baseplate and post-installed rebar connections
Base materialsConcrete (cracked), Concrete (lightweight), Concrete (uncracked)
Approvals / Test reportsDOT approval (contact Hilti), ICC-ES report (concrete), ICC-ES report (masonry), LABC, Seismic
PROFIS SoftwareYes
Base materialsConcrete (cracked), Concrete (lightweight), Concrete (uncracked)Approvals / Test reportsDOT approval (contact Hilti), ICC-ES report (concrete), ICC-ES report (masonry), LABC, SeismicPROFIS SoftwareYesClean-TecNoCleaning proceduresAutomatic Cleaning (SafeSet Hollow Drill Bit), Compressed-Air Cleaning, Non CleaningStorage and transportation temperature range41 - 77 °FIn-service temperature &ndash range-40 - 248 °FShelf life from date of manufacture (at 73°F/23°C and 50% relative humidity)12 monthsProduct ClassUltimate
HIT-HY 200-A Adhesive anchor Hybrid adh HY 200-A 11.1oz/330ml #2022791 (Old Verision)Base materialsConcrete (cracked), Concrete (uncracked), Masonry (grout-filled CMU)Base material conditionDry, WetApprovals / Test reportsICC-ES report (concrete), SeismicSeismic loadingYesFatigue loadingNoFire resistanceNoPROFIS SoftwareYesClean-TecNoAnchoring elementsHAS threaded rods, HIS-N internally threaded sleeves, HIT-Z torque controlled bonded anchors, RebarCleaning proceduresAutomatic Cleaning (SafeSet Hollow Drill Bit), Compressed-Air Cleaning, Non CleaningStorage and transportation temperature range41 - 77 °FIn-service temperature &ndash range-40 - 248 °FShelf life from date of manufacture (at 73°F/23°C and 50% relative humidity)12 monthsProduct ClassUltimate
$
64.39
Qty:
Part #:511683
-
HIT-HY 200-R Adhesive anchor Hybrid adh HY 200-R 11.1oz/330ml #2022793 Replaced By
HIT-HY 200-R V3 Adhesive anchor
Ultimate-performance injectable hybrid mortar with approvals for post-installed rebar connections and anchoring structural steel baseplate
Base materials Concrete (cracked), Concrete (lightweight), Concrete (uncracked)
Approvals / Test reports DOT approval (contact Hilti), ICC-ES report (concrete), ICC-ES report (masonry), LABC, Seismic
PROFIS Software Yes
$
64.39
Qty:
Part #:500192
- Kwik Bolt 1 carbon steel wedge anchor
High-performance wedge anchor for cracked concrete and seismic (carbon steel)
Material, corrosionCarbon steel, zinc-plated
Head configurationExternally threaded
Drilling Method (AS)Hammer Drilling, Hollow Drill Bit Drilling
Material, corrosionCarbon steel, zinc-platedHead configurationExternally threadedDrilling Method (AS)Hammer Drilling, Hollow Drill Bit DrillingInstallation toolsTE 6-A36 Cordless rotary hammer, SIW 6AT-A22 Cordless impact wrench
$
7.49
Qty:
Part #:508597
-
TE-CX (SDS Plus) Imperial hammer drill bit Hammer drill bit TE-CX 5/8" x 12" #435019
Connection endTE-C (SDS Plus)Base materialReinforced concrete, Concrete, Brick, MasonryWorking modeHammer drillingHead shapeMulti CutterHead material compositionTungsten carbideNumber of cutting edges4Diameter5/8 inLength12 inWorking length10 inProduct ClassUltimate
$
92.32
Qty:
Part #:507221
-
HVU2 Anchor capsule Adhesive capsule HVU2 1/2" x 4 1/4" #2234721
Ultimate-performance foil capsule for heavy-duty anchoring in concrete
PROFIS SoftwareYes
Tested/approved for diamond drillingYes
In-service temperature &ndash range-40 - 248 °F
PROFIS SoftwareYesTested/approved for diamond drillingYesIn-service temperature &ndash range-40 - 248 °FStorage and transportation temperature range-4 - 77 °FShelf life from date of manufacture (at 73°F/23°C and 50% relative humidity)24 monthsProduct ClassUltimate
Part #:508616
- Kwik Bolt 1 carbon steel wedge anchor
High-performance wedge anchor for cracked concrete and seismic (carbon steel)
Material, corrosionCarbon steel, zinc-plated
Head configurationExternally threaded
Drilling Method (AS)Hammer Drilling, Hollow Drill Bit Drilling
Material, corrosionCarbon steel, zinc-platedHead configurationExternally threadedDrilling Method (AS)Hammer Drilling, Hollow Drill Bit DrillingInstallation toolsTE 6-A36 Cordless rotary hammer, SIW 6AT-A22 Cordless impact wrench
$
2.53
Qty:
Part #:805310
- Kwik Bolt 1 carbon steel wedge anchor
High-performance wedge anchor for cracked concrete and seismic (carbon steel)
Material, corrosionCarbon steel, zinc-plated
Head configurationExternally threaded
Drilling Method (AS)Hammer Drilling, Hollow Drill Bit Drilling
Material, corrosionCarbon steel, zinc-platedHead configurationExternally threadedDrilling Method (AS)Hammer Drilling, Hollow Drill Bit DrillingInstallation toolsTE 6-A36 Cordless rotary hammer, SIW 6AT-A22 Cordless impact wrench
$
3.36
Qty:
Part #:508621
- Kwik Bolt 1 carbon steel wedge anchor
High-performance wedge anchor for cracked concrete and seismic (carbon steel)
Material, corrosionCarbon steel, zinc-plated
Head configurationExternally threaded
Drilling Method (AS)Hammer Drilling, Hollow Drill Bit Drilling
Material, corrosionCarbon steel, zinc-platedHead configurationExternally threadedDrilling Method (AS)Hammer Drilling, Hollow Drill Bit DrillingInstallation toolsTE 6-A36 Cordless rotary hammer, SIW 6AT-A22 Cordless impact wrench
$
4.72
Qty:
Part #:501620
- Nominal Smooth Bore PTFE Hose Non-conductive (Replaces 919-12)
Attributes
Weight
0.17 lb
Break Quantity
0
Optional Package/Box Quantity
1
Material
PTFE
Color
White
Working Pressure
1200 PSI
Temperature Range
-100°F to 450°F (-73°C to 232°C)
Burst Pressure
4800 PSI
Length
1'
Nominal Size
3/4"
Hose Size
dash 12
ID
.625"
$
7.76
FT
Qty:
Part #:334-2721212C
- Male NPT x Push-on Hose Barb Attributes
Weight
0.194 lb
Material
Brass
Component Material
Yellow Plastic Cap
Male Thread
NPTF
Temperature Range
-40°F to 150°F
Length
2.55"
Hose ID
3/4"
Hex
1-1/16"
Male Thread Size
3/4"-14
Pressure Rating
350 PSI
$
6.38
Qty:
Part #:104403
- Conical Muffler Attributes
Maximum Operating Pressure
300 PSI
Weight
0.0355 lb
Material
Nickel Plated Steel
Male Thread
NPT
Temperature Range
35°F to 300°F (1.7°C to 149°C)
Length
1-3/8"
Male Thread Size
1/4"
$
2.67
Qty:
Part #:521785
-
Call attention to documents, inventory, sale items, calendars and more with bright color
Labels are removable so you can peel away when no longer needed
Customize with free templates at avery.com
For use with laser or inkjet printers
Not recommended for use with color laser printers
$
6.55
Qty:
Part #:100696
- SSE31 - Stretch Strap
Attributes
Weight
0.36 lb
Break Quantity
0
Optional Package/Box Quantity
0
Length
31"
$
3.06
Qty:
Part #:509866
-
TE-YX FM Flat chisels Narrow-Flat Chisel TE-YP FM 28 #2241990
Connection endTE-Y (SDS Max)Length11 inWidth1 inProduct ClassUltimate
$
69.89
Qty:
Part #:505194
- Kwik Bolt 1 carbon steel wedge anchor
High-performance wedge anchor for cracked concrete and seismic (carbon steel)
Material, corrosionCarbon steel, zinc-plated
Head configurationExternally threaded
Drilling Method (AS)Hammer Drilling, Hollow Drill Bit Drilling
Material, corrosionCarbon steel, zinc-platedHead configurationExternally threadedDrilling Method (AS)Hammer Drilling, Hollow Drill Bit DrillingInstallation toolsTE 6-A36 Cordless rotary hammer, SIW 6AT-A22 Cordless impact wrench
$
1.39
Qty:
Displaying: 1 - 24 of 314 Matching Items