J. H. Williams
Carborundum
View:
Active Filters :
Part #:304331
- 20A Double Pole, Double Throw Switch, Brown
Oversize silver alloy contacts for long life and better heat dissipation.
Side wired terminals accept #14 - #10 AWG copper or copper-clad conductors.
Fiber terminal insulation barriers standard.
Can be mounted in standard device boxes or in NEMA 1 sheet steel enclosures.
Bodies, covers, and toggles molded of durable nylon.
Single Pole-Double Throw and Double Pole-Double Throw.
Locking Switches supplied with one 1498-NT key.
Normally open.
For covering patents, see www.legrand.us/patents.
For compatible wall plate options, from our TradeMaster unbreakable plates to our radiant screwless plates to our metal wall plates, click here.
CSA File Number 17949
Qty:
Part #:304966
- Extremely durable for hard-use institutional applications. Spring-loaded covers close automatically when plugs are removed. Die-cast copper-free aluminum construction. Stainless steel springs. Screws and spring covers are chrome-plated brass. Baked-on lacquer finish. Heavy rubber gaskets provide positive seal. All covers below are for 4 screw mounting only. Comply with 2005 NEC Section 406.8(A) and 406.8(B)(2).
$
12.35
Qty:
closeout
$94.22 MSRP
$
50.21
Part #:308114
- CLOSEOUTS Only 3 Left!
- In-Line Portable 15A GFCI, Manual Reset
In-line portable GFCI interrupter
Qty:
Part #:308442
- 60A Power Interrupting Receptacle, Diecast with Lift Lid Enclosure
$
964.68
Qty:
Part #:507472
- Carborundum Aluminum Oxide Resin Cloth Sheets, Aluminum Oxide Cloth, P240
Product DetailsSuperior conformability to complex surfaces and better finishes
Qty:
Part #:501754
- Silicon Carbide Paper Sheets Better Tier / Silicon Carbide Resin Waterproof Paper
Exceptional finishing in wet applications.
BF 0416 W
Qty:
Part #:501742
- Silicon Carbide Paper Sheets Good Tier / Silicon Carbide Resin Waterproof Paper
May be used wet or dry on plastic or painted surfaces. Best results are obtained when used wet.Excellent for machine and hand rubbing of lacquer, urethane and varathane between coats. Ideal forobtaining fine finishes and feather-edging painted surfaces.
Qty:
closeout
Part #:507581
- CLOSEOUTS Only 1 Left!
- Aluminum Oxide Cloth Rolls Good Tier / Aluminum Oxide Resin Cloth Ideal for cleaning and deburring metal surfaces. May be used dry or with oil.
JCF 0852
$
28.32
Qty:
closeout
$7.74 MSRP
$
3.50
Part #:500702
- CLOSEOUTS Only 100 Left!
- Silicon Carbide Sandscreen SheetsGood Tier / Silicon Carbide Waterproof Resin Sandscreen
Features &bull Black, silicon carbide abrasive&bull P-graded in 220 and coarser grits &bull Full resin bond system &bull Screen backing &bull Both sides are usable
Benefits
&bull Very sharp and hard, but brittle
&bull Provides consistent finishes
&bull Maximum grain adhesion
&bull Load resistant
Qty:
Part #:500975
- Aluminum Oxide Cloth Rolls Good Tier / Aluminum Oxide Resin Cloth
Ideal for cleaning and deburring metal surfaces. May be used dry or with oil.
Part #:507583
- Aluminum Oxide Cloth Rolls Good Tier / Aluminum Oxide Resin ClothIdeal for cleaning and deburring metal surfaces. May be used dry or with oil.
JCF 0852
Qty:
Part #:505714
- Aluminum Oxide Cloth Sheets Good Tier / Aluminum Oxide Resin Cloth
Ideal for hand sanding, deburring, polishing and removing cutting tool marks on all metal parts.
P320 JCF 0852
Qty:
Part #:507471
- Aluminum Oxide Cloth Sheets Good Tier / Aluminum Oxide Resin Cloth
Ideal for hand sanding, deburring, polishing and removing cutting tool marks on all metal parts.
JCF 0852
Qty:
Part #:507466
- Aluminum Oxide Cloth Sheets Good Tier / Aluminum Oxide Resin Cloth
Ideal for hand sanding, deburring, polishing and removing cutting tool marks on all metal parts.
JCF 0852
Qty:
Part #:507465
- Aluminum Oxide Cloth Sheets Good Tier / Aluminum Oxide Resin Cloth
Ideal for hand sanding, deburring, polishing and removing cutting tool marks on all metal parts.
JCF 0852
Qty:
Part #:503817
- Aluminum Oxide Narrow Belts Good Tier / Aluminum Oxide Resin Waterproof Cloth
Ideal for operations requiring a belt specification that does not generate heat, but is capable of sandinga variety of materials. Closed coat for fast metal removal.
Grading P60
YP 0998 W
Qty:
Part #:504491
- Aluminum Oxide Narrow Belts Good Tier / Aluminum Oxide Resin Waterproof Cloth
Ideal for operations requiring a belt specification that does not generate heat, but is capable of sandinga variety of materials. Closed coat for fast metal removal.
Qty:
Part #:507452
- Silicon Carbide Paper Sheets Better Tier / Silicon Carbide Resin Waterproof Paper
Exceptional finishing in wet applications
BF 0416 W
Qty:
Part #:505674
- Fibrate x Non-Woven Hand Pads Good Tier / Aluminum Oxide, Silicon Carbide, or Non-Abrasive
Very fine, aluminum oxide pads for general cleaning and finishing, removal of rust and oxidation from metals, and lightlysanding old paint or new primers. No color bleeding when working with solvents. 84700 is perforated to create two smaller4-1/2" x 6" pads.
Fibrate x Non-Woven Hand PadsGood Tier / Aluminum Oxide, Silicon Carbide, or Non-Abrasive
Very Fine A/O Gen. Purp. Maroon
Qty:
Part #:500847
- Green &ndash 05539579600 A very fine grit aluminum oxide pad for general clean-up as well as finishing stainless steel.
Fibrate x Non-Woven Hand PadsGood Tier / Aluminum Oxide, Silicon Carbide, or Non-Abrasive
Fibratex products are a non-woven nylon web impregnated with abrasive grain and resin bond. They arenon-metallic, won't rust, and are ideal as replacements for steel wool and/or wire brushes.
Qty:
Part #:300393
- Industrial Extra Heavy Duty Specification Grade Switch, Brown
One-piece toggle molded from chemical-,impact-,and heat-resistant thermoplastic.
Impact- and chemical-resistant cover.
Glass-reinforced, chemical-resistant thermoplastic back body for durability, strength, and resistance to harsh cleaners.
One-piece nickel-plated brass strap for superior corrosion-resistance.
Auto-ground clip assures positive ground.
Cam control and spring actuator for positive ''makes and breaks.''
Heavy-duty bumpers for quiet, smooth operation.
Locking support provides resistance to face and back body separation.
Oversized silver-alloy contacts for long life and better heat dissipation.
Side and external screw-pressure-plate back wire with #14 - #10 AWG copper or copper-clad wire.
Heavy-duty, brass alloy, one-piece contact arm virtually eliminates contact bounce.
Grounding terminal is standard with screw-pressure plate back wire.
Shallow design for easier installation.
For covering patents, see www.legrand.us/patents.
For compatible wall plate options, from our TradeMaster unbreakable plates to our radiant screwless plates to our metal wall plates, click here.
Qty:
Part #:304701
- Weatherproof Cover for Flanged Inlet/Outlet
Unbreakable glass-filled polycarbonate construction to withstand years of job site abuse and harsh environmental exposure.
Stainless steel mounting screws also resist corrosion.
Covers comply with 2005 NEC Section 406.8(A) and 406.8(B)(2).
Molded-in label area (2.8 sq. in.) for pre-printed or handwritten labels for identification of circuits, ratings and other application data.
WPG1 and WPG2 have lockable bullnose for OSHA locktag/tagout compliance.
Covers fit all competitive inlets and outlets.
Pre-attached gaskets for easy installation and tight seal to panel or weatherproof box -- with no misaligned or collapsed gaskets.
Tamper-proof hinge features permanent, locked-in pins for added security.
cULus ListingNumber 143222
Qty:
Part #:511684
- 1/2" Drive Crowfoot Wrench Set, Open End, SAE, 12 Pieces
10840 12 Piece 1/2" Drive Crowfoot Wrenches on Clip RailsContents IncludeProduct Code Size (Inches) 10810 15&frasl16 10811 1 10812 1 1&frasl16 10813 1 1&frasl8
10814 1 3&frasl16
10815 1 1&frasl4
10816 1 5&frasl16
10817 1 3&frasl8
10818 1 7&frasl16
10819 1 1&frasl2
10820 1 9&frasl16
10821 1 5&frasl8
Qty:
Part #:307113
- 20A NEMA Plug L142
Quick-thread assembly screws and cord-grip screws come backed-out, ready-to-wire.
Industrial-strength, brass alloy plug blades and connector contacts resist heat rise, provide excellent conductivity.
Raised ribs provide non-slip gripping profile for turning to lock and unlock.
Double dovetail design provides superior protection against cord pull-out forces.
Impact- and corrosion-resistant durable nylon 6 shell material.
Rounded back contour reduces snags and hang-ups on the job site.
Scallop shell design provides non-slip gripping surface for insertion and withdrawal.
Visible stamped NEMA configuration and device rating.
New-design external cord grips provide visible assurance of safe and proper cord retention.
Integral flexible rubber cord grommet conforms to and seals around SO cord to provide protection from oils, water, or chips entering wiring chamber.
- Black Back, White Front Body
cULus ListingNumber 146159
Qty:
Displaying: 1 - 24 of 641 Matching Items