Hilti
Columbus McKinnon (C-M)
View:
Active Filters :
- Brand: Columbus McKinnon (C-M) Hilti
Part #:511262
-
HDM Manual adhesive dispenser Manual dispenser HDM 500 + black cartr #3498241
Manual hybrid/epoxy adhesive anchor dispenser
Dispenser typeManual
$
340.02
Qty:
Part #:511296
-
HIT-Z Anchor rod Anchor rod HIT-Z 5/8" x 9-1/2" #2018448Material, corrosionCarbon steel, zinc-platedWrench/nut size15/16 inDrill bit diameter3/4 inBase materialsConcrete (cracked), Concrete (uncracked)PROFIS SoftwareYesApprovals / Test reportsICC-ES report (concrete)Cleaning proceduresNon CleaningType of fixingPre-fastening, Through-fasteningProduct ClassUltimate
Part #:511332
-
HIT-RE 500 V3 Epoxy anchor Epoxy adh RE 500-V3 11.1oz/330ml #2123401 Base materialsConcrete (cracked), Concrete (uncracked)Base material conditionDry, Submerged, Water-filled, WetApprovals / Test reportsICC-ES report (concrete)Seismic loadingYesPROFIS SoftwareYesClean-TecNoCleaning proceduresAutomatic Cleaning (SafeSet Hollow Drill Bit), Compressed-Air CleaningStorage and transportation temperature range41 - 77 °FIn-service temperature &ndash range-40 - 158 °FShelf life from date of manufacture (at 73°F/23°C and 50% relative humidity)12 monthsProduct informationThis product is subject to the Chemicals Prohibition Ordinance (ChemVerbotsV). It is to be used by professionals within the scope of their work and, in accordance with § 8 para. 3 no. 1 of the ChemVerbotsV, is to be used exclusively for its intended purpose as anchor adhesive, for rebar connections (typically steel-to-concrete and/or concrete-to-concrete connections), as well as for other intended fastening and uses within the scope of construction activities. Purchasers must comply with all existing legal requirements for the use of these products and may use them only as permitted. Information in the safety data sheets and operating instructions on the use of these products, the hazards associated with their use, the necessary safety measures during intended use and in the event of unforeseen spillage or release, and proper disposal must always be observed. The operating instructions and safety data sheets can be accessed in the detailed view of the products concerned at www.hilti.de in a format that can be saved and printed, and the operating instructions are enclosed with the products. Safety instructions Wear protective gloves/protective clothing/eye protection/face protection. Do not get in eyes, on skin or on clothing. In case of contact with eyes rinse thoroughly with water for several minutes. Remove contact lenses if possible, continue rinsing. If eye irritation, skin irritation or rash persist seek medical advice/attention. In case of contact with skin wash with plenty of soap and water. Disposal Completely emptied cartridges can be disposed of via the Dual System (yellow garbage can). Full/partially emptied containers are to be disposed of as special waste.Product ClassUltimate
Qty:
Part #:511731
-
HDM Manual adhesive dispenser Manual dispenser HDM 500 + red cartr #3498242
Manual hybrid/epoxy adhesive anchor dispenser
Dispenser typeManual
$
340.02
Qty:
Qty:
Part #:511740
-
Cartridge holder red HIT-CR 500 #2007059
$
53.26
Qty:
$
448.55
Qty:
Part #:510283
- CM Series 632
close radius trolley With revolutionary advances, this shorter, more compact
trolley is 50% lighter than competitive trolleys, yet every bit
as tough. Negotiates radius curves as tight as 7 to 10 inches
Made of highest quality rolled steel
Unique double row, ball bearing wheel design
for greater wear capacity
Larger V-bars available for wider flange adjustment
For low headroom applications
Bearings prepacked with lifetime lubricant
Exclusive Dial-Fit collar quickly adapts trolley to
wide range of beams and patented rails
Dust covers shield and protect bearings
Trolleys available for larger beams, rails or tracks
contact CM
Cast iron trolley guards available (except for 3 ton)
Lifetime warranty
Made in U.S.A.
$
588.72
Qty:
Part #:800373
- The CM Puller is designed for heavy-duty construction and industrial
applications. Used to pull, lift, drag or stretch, it features Tough aluminum alloy construction
and powder coat finish
Weatherproof for outdoor service
Simple construction with fewer parts
for ease of maintenance and lower
inventories
Hoistaloy hardened steel link type
load chain for strength, long wear
life and flexibility
Weatherized Weston-type automatic
braking system for positive load
control
Easy, one-hand operation and
control only 58 pounds of pull
required for 34 ton model capacity
Forged upper and lower hooks with
latches standard
Free wheeling for fast and easy
attachment to load
Upper and lower Latchlok hooks
available for all capacities
Optional Load Limiter protection
device stops transmission of lever
forces protecting against dangerous
overload
Optional anchor sling simplifies
attachment to allow anchor
hook to swivel in tight space
applications (34 & 112 ton
units only)
Optional Load Sentry warns of
overload condition
Optional zinc-plated chain available
Unlimited lift
Lifetime warranty
Metric rated
Made in U.S.A.
$
1,005.72
Qty:
Part #:800375
- The CM Puller is designed for heavy-duty construction and industrial
applications. Used to pull, lift, drag or stretch, it features Tough aluminum alloy construction
and powder coat finish
Weatherproof for outdoor service
Simple construction with fewer parts
for ease of maintenance and lower
inventories
Hoistaloy hardened steel link type
load chain for strength, long wear
life and flexibility
Weatherized Weston-type automatic
braking system for positive load
control
Easy, one-hand operation and
control only 58 pounds of pull
required for 34 ton model capacity
Forged upper and lower hooks with
latches standard
Free wheeling for fast and easy
attachment to load
Upper and lower Latchlok hooks
available for all capacities
Optional Load Limiter protection
device stops transmission of lever
forces protecting against dangerous
overload
Optional anchor sling simplifies
attachment to allow anchor
hook to swivel in tight space
applications (34 & 112 ton
units only)
Optional Load Sentry warns of
overload condition
Optional zinc-plated chain available
Unlimited lift
Lifetime warranty
Metric rated
Made in U.S.A.
$
2,130.66
Qty:
Part #:511331
-
HIT-HY 200-A V3 Adhesive anchor (New Verision)
Ultimate-performance injectable hybrid mortar with approvals for anchoring structural steel baseplate and post-installed rebar connections
Base materialsConcrete (cracked), Concrete (lightweight), Concrete (uncracked)
Approvals / Test reportsDOT approval (contact Hilti), ICC-ES report (concrete), ICC-ES report (masonry), LABC, Seismic
PROFIS SoftwareYes
Base materialsConcrete (cracked), Concrete (lightweight), Concrete (uncracked)Approvals / Test reportsDOT approval (contact Hilti), ICC-ES report (concrete), ICC-ES report (masonry), LABC, SeismicPROFIS SoftwareYesClean-TecNoCleaning proceduresAutomatic Cleaning (SafeSet Hollow Drill Bit), Compressed-Air Cleaning, Non CleaningStorage and transportation temperature range41 - 77 °FIn-service temperature &ndash range-40 - 248 °FShelf life from date of manufacture (at 73°F/23°C and 50% relative humidity)12 monthsProduct ClassUltimate
HIT-HY 200-A Adhesive anchor Hybrid adh HY 200-A 11.1oz/330ml #2022791 (Old Verision)Base materialsConcrete (cracked), Concrete (uncracked), Masonry (grout-filled CMU)Base material conditionDry, WetApprovals / Test reportsICC-ES report (concrete), SeismicSeismic loadingYesFatigue loadingNoFire resistanceNoPROFIS SoftwareYesClean-TecNoAnchoring elementsHAS threaded rods, HIS-N internally threaded sleeves, HIT-Z torque controlled bonded anchors, RebarCleaning proceduresAutomatic Cleaning (SafeSet Hollow Drill Bit), Compressed-Air Cleaning, Non CleaningStorage and transportation temperature range41 - 77 °FIn-service temperature &ndash range-40 - 248 °FShelf life from date of manufacture (at 73°F/23°C and 50% relative humidity)12 monthsProduct ClassUltimate
Qty:
Part #:511683
-
HIT-HY 200-R Adhesive anchor Hybrid adh HY 200-R 11.1oz/330ml #2022793 Replaced By HIT-HY 200-R V3
Ultimate-performance injectable hybrid mortar with approvals for post-installed rebar connections and anchoring structural steel baseplate
Base materials Concrete (cracked), Concrete (lightweight), Concrete (uncracked)
Approvals / Test reports DOT approval (contact Hilti), ICC-ES report (concrete), ICC-ES report (masonry), LABC, Seismic
PROFIS Software Yes
Qty:
Part #:500192
- Kwik Bolt 1 carbon steel wedge anchor
High-performance wedge anchor for cracked concrete and seismic (carbon steel)
Material, corrosionCarbon steel, zinc-plated
Head configurationExternally threaded
Drilling Method (AS)Hammer Drilling, Hollow Drill Bit Drilling
Material, corrosionCarbon steel, zinc-platedHead configurationExternally threadedDrilling Method (AS)Hammer Drilling, Hollow Drill Bit DrillingInstallation toolsTE 6-A36 Cordless rotary hammer, SIW 6AT-A22 Cordless impact wrench
Qty:
Part #:507221
-
HVU2 Anchor capsule Adhesive capsule HVU2 1/2" x 4 1/4" #2234721
Ultimate-performance foil capsule for heavy-duty anchoring in concrete
PROFIS SoftwareYes
Tested/approved for diamond drillingYes
In-service temperature &ndash range-40 - 248 °F
PROFIS SoftwareYesTested/approved for diamond drillingYesIn-service temperature &ndash range-40 - 248 °FStorage and transportation temperature range-4 - 77 °FShelf life from date of manufacture (at 73°F/23°C and 50% relative humidity)24 monthsProduct ClassUltimate
Part #:508616
- Kwik Bolt 1 carbon steel wedge anchor
High-performance wedge anchor for cracked concrete and seismic (carbon steel)
Material, corrosionCarbon steel, zinc-plated
Head configurationExternally threaded
Drilling Method (AS)Hammer Drilling, Hollow Drill Bit Drilling
Material, corrosionCarbon steel, zinc-platedHead configurationExternally threadedDrilling Method (AS)Hammer Drilling, Hollow Drill Bit DrillingInstallation toolsTE 6-A36 Cordless rotary hammer, SIW 6AT-A22 Cordless impact wrench
Qty:
Part #:805310
- Kwik Bolt 1 carbon steel wedge anchor
High-performance wedge anchor for cracked concrete and seismic (carbon steel)
Material, corrosionCarbon steel, zinc-plated
Head configurationExternally threaded
Drilling Method (AS)Hammer Drilling, Hollow Drill Bit Drilling
Material, corrosionCarbon steel, zinc-platedHead configurationExternally threadedDrilling Method (AS)Hammer Drilling, Hollow Drill Bit DrillingInstallation toolsTE 6-A36 Cordless rotary hammer, SIW 6AT-A22 Cordless impact wrench
Qty:
Part #:508621
- Kwik Bolt 1 carbon steel wedge anchor
High-performance wedge anchor for cracked concrete and seismic (carbon steel)
Material, corrosionCarbon steel, zinc-plated
Head configurationExternally threaded
Drilling Method (AS)Hammer Drilling, Hollow Drill Bit Drilling
Material, corrosionCarbon steel, zinc-platedHead configurationExternally threadedDrilling Method (AS)Hammer Drilling, Hollow Drill Bit DrillingInstallation toolsTE 6-A36 Cordless rotary hammer, SIW 6AT-A22 Cordless impact wrench
Qty:
Part #:800374
- The CM Puller is designed for heavy-duty construction and industrial
applications. Used to pull, lift, drag or stretch, it features Tough aluminum alloy construction
and powder coat finish
Weatherproof for outdoor service
Simple construction with fewer parts
for ease of maintenance and lower
inventories
Hoistaloy hardened steel link type
load chain for strength, long wear
life and flexibility
Weatherized Weston-type automatic
braking system for positive load
control
Easy, one-hand operation and
control only 58 pounds of pull
required for 34 ton model capacity
Forged upper and lower hooks with
latches standard
Free wheeling for fast and easy
attachment to load
Upper and lower Latchlok hooks
available for all capacities
Optional Load Limiter protection
device stops transmission of lever
forces protecting against dangerous
overload
Optional anchor sling simplifies
attachment to allow anchor
hook to swivel in tight space
applications (34 & 112 ton
units only)
Optional Load Sentry warns of
overload condition
Optional zinc-plated chain available
Unlimited lift
Lifetime warranty
Metric rated
Made in U.S.A.
$
1,497.46
Qty:
Part #:801791
- SERIES 622
MODEL 622-A
1/2 TO 5 TON CAPACITIES
STANDARD LIFTS UP TO 30 FT.
HAND CHAIN HOIST. The CM Series 622 hand chain hoist features
a simple, efficient and economical design. With an ultra-low-headroom profile and lightweight steel construction, the CM 622 is easy to install, even in confined spaces. Redesigned for optimal performance, this hoist requires even less pull force for operation and has larger hook throat openings for easier attachment.
$
392.04
Qty:
closeout
$
421.92
Qty:
Part #:802163
- CM Series 632
close radius trolley With revolutionary advances, this shorter, more compact
trolley is 50% lighter than competitive trolleys, yet every bit
as tough. Negotiates radius curves as tight as 7 to 10 inches
Made of highest quality rolled steel
Unique double row, ball bearing wheel design
for greater wear capacity
Larger V-bars available for wider flange adjustment
For low headroom applications
Bearings prepacked with lifetime lubricant
Exclusive Dial-Fit collar quickly adapts trolley to
wide range of beams and patented rails
Dust covers shield and protect bearings
Trolleys available for larger beams, rails or tracks
contact CM
Cast iron trolley guards available (except for 3 ton)
Lifetime warranty
Made in U.S.A.
$
699.60
Qty:
Part #:801783
- SERIES 622
MODEL 622-A
1/2 TO 5 TON CAPACITIES
STANDARD LIFTS UP TO 30 FT.
HAND CHAIN HOIST. The CM Series 622 hand chain hoist features
a simple, efficient and economical design. With an ultra-low-headroom profile and lightweight steel construction, the CM 622 is easy to install, even in confined spaces. Redesigned for optimal performance, this hoist requires even less pull force for operation and has larger hook throat openings for easier attachment.
$
343.44
Qty:
Part #:500704
- Kwik Bolt 1 carbon steel wedge anchor
High-performance wedge anchor for cracked concrete and seismic (carbon steel)
Material, corrosionCarbon steel, zinc-plated
Head configurationExternally threaded
Drilling Method (AS)Hammer Drilling, Hollow Drill Bit Drilling
Material, corrosionCarbon steel, zinc-platedHead configurationExternally threadedDrilling Method (AS)Hammer Drilling, Hollow Drill Bit DrillingInstallation toolsTE 6-A36 Cordless rotary hammer, SIW 6AT-A22 Cordless impact wrench
Qty:
Part #:509866
-
TE-YX FM Flat chisels Narrow-Flat Chisel TE-YP FM 28 #2241990
Connection endTE-Y (SDS Max)Length11 inWidth1 inProduct ClassUltimate
$
86.04
Qty:
Displaying: 1 - 24 of 149 Matching Items