Victor
Devcon
Part #:500440
- Product Details
Typical Use
Bonds metals, fabrics, ceramics, glass, wood, and concrete (in combinations).
Brand
5 Minute Epoxy
Chemical Composition
Epoxy resin polyamines
Color
Light Amber
Components
2 part
Cure System
Room Temperature
Cure Time
12h @ 22.2 °C
Dielectric Strength
490 V/mil
Elongation
1%
Flash Point
>204.4 °C
Hardness
85 D
Impact Resistance
5.5 ft-lb/in^2
Mix Ratio
11 by volume 11 by weight
Peel Strength
2 to 3 pli
Service Temperature
-40 to 93.3 °C
Shear Strength
1,900
Specific Gravity
1.17
Viscosity
Mixed 10,000
Working Time
3 to 6min @ 22.2 °C
$
21.25
Qty:
Part #:508073
- Devcon® Plastic Steel® Putty (A)The original metal-filled epoxy putty, itis ideal for repairing areas wherewelding or brazing would be impractical.Can be drilled, tapped and machined.Conforms to the requirements ofMIL-PRF-24176C, Type I.
$
95.13
Qty:
Part #:508082
- Description
Aluminum-filled epoxy putty for dependable non-rusting repairs to aluminum castings, machinery and equipment widely used in HVAC applications.
Key Features
Repairs air conditioning system components
Listed under NSN Stock #8030-00-051-4511 #8030-00-670-8553
Bonds to aluminum and many other metals
Fills porosity in aluminum castings
Can be machined drilled or tapped using conventional metalworking tools
Qualifies under Mil Spec MIL-PRF-24176C, Type II
Open Time 60 Minutes
Gap Fill 0.0625&Prime &ndash 0.75&Prime
Devcon® Metal Repair PuttiesMetal-filled epoxy putties allow fast, economical, permanent repairs to plantand equipment cure quickly and resist corrosion and harsh chemicals
$
137.59
Qty:
Part #:510290
- Description
High-performance, brushable urethane coating that cures to a medium hard rubber (Hardness Shore A 86) for protection against wear due to abrasion and impact.
Key Features
Applies in thicknesses of 50 mils in one application
Protects hoppers, chutes, pump impellers, feeder bowls, and fans
Used with Flexane® primers for maximum adhesion to metals, rubber, wood, fiberglass, and concrete
Open Time 45 Minutes
Color Black
Unit Size 1lb
Part #:508074
- Devcon® Plastic Steel® Putty (A)The original metal-filled epoxy putty, itis ideal for repairing areas wherewelding or brazing would be impractical.Can be drilled, tapped and machined.Conforms to the requirements ofMIL-PRF-24176C, Type I.
$
428.46
Qty:
Part #:508083
- Description
Aluminum-filled pourable epoxy for making molds, patterns, and holding fixtures.
Key Features
Mixes and pours easily
Hardens in just over 1 hour cures in 16 hours
Can be cast over models for accurate reproduction of details
Low viscosity permits reproduction of delicate or intricate parts
Listed under NSN stock #8030-00-229-8740 #8030-00-159-5032
Open Time 75 Minutes
Gap Fill .0625&Prime &ndash .075&Prime
Liquids and Metal Casting CompoundsPourable epoxy compounds provide accurate detail reproductionand are ideal for making molds, patterns, holding fixtures andforming dies.
Part #:509841
- Description
Rapid-curing, general-purpose adhesive/encapsulant which easily dispenses and mixes in seconds, dries in 15 minutes and reaches functional strength in 1 hour.
Key Features
Bonds rigid durable substrates such as metals, glass, ceramics, concrete and wood in all combinations
Forms a clear hard rigid bond self leveling liquid in minutes
Listed under NSN Stock#8040-00-264-6816#8040-01-067-6126
Functional strength in 1 hour
100% reactive, no solvents
Low viscosity (10,000 cps)
Open Time 4-7 minutes
Fixture Time 10-15 minutes
Color Clear
Mix Ratio 11
Working Time Min 3
Working Time Max 6
Fixture Time Min 10
Fixture Time Max 15
Devcon® advanced epoxy adhesives are used for structural bonding, potting and encapsulating,and come in a variety of cure times and package sizes.
$
12.45
Qty:
$
109.03
Qty:
Part #:506005
- Description
Stainless steel-filled epoxy putty for patching, repairing and rebuilding stainless steel food processing equipment.
Devcon Stainless Steel Putty (ST)Product DetailsStainless steel-filled epoxy putty for patching, repairing, and rebuilding stainless steel food processing equipment Bonds to ferrous and non-ferrous metals Non-rusting NSF certified for potable water applications Acceptable for use in meat and poultry plants 58-minute working time
NSF/ANSI 61
$
198.65
Qty:
Part #:502554
- Devcon® Ceramic Repair Putty
Smooth, trowelable, alumina-filled epoxy compound for rebuilding and protecting processing equipment exposed to corrosion, erosion, cavitation, chemicals, and acids.
$
482.49
Qty:
Part #:841-0781-9405
- Medium Duty G Series, Acetylene, CGA 510
Qty:
Part #:841-341-0781-9400
- Victor Medium Duty G SeriesProduct DetailsEasy-to-read high contrast gauges for clarityColor-coded knobs indicate gas typeDesigned for better comfort when adjusting gas pressureHigh Strength alloy bonnet with nearly twice the yield strength of brassLower profile regulator with less knob stickout
Qty:
Part #:511445
- Description
Mixing and delivery tool for11 and 21 epoxy adhesives (50 ml), 11 and 101 methacrylate adhesives (35 ml and 47 ml) and 11 urethane adhesives.
Key Features
Automatically and thoroughly mixes adhesive components for application
Easy to load
20 element
635 mm (.25&Prime) diameter
6 in. length
Use with 14280 and 74001 Mark 5 Manual Gun
Part #:841-341-0657-0015
- FlameBuster&trade Flashback Arrestors, FB-FR, Fuel, &ldquoB&rdquo 9/16 in-18 RH CGA 023
Victor FlameBusterTM Flashback ArrestorsProduct DetailsFor all oxygen and fuel welding and cutting torchesFor preventing flashback from torch to hoseGas tight O-ring sealThreads for connection to torch or regulatorIncludesBuilt-In Reverse Flow Check ValveNut & Swivel Assembly
Qty:
Part #:841-341-0781-0043
- SR 250 Series Single Stage Med Duty Regulators, Inert Gas, CGA 540, 3,000 psig
Victor SR 250 Series Single Stage Medium Duty RegulatorsProduct DetailsCompact single stage constructionStem type seat mechanismDelrin® cap bushing for smooth adjustmentsExternal self reseating relief valve not designed to protect downstream apparatus
$
360.55
Qty:
Part #:841-341-0781-0087
- SR 250 Series Single Stage Medium Duty Regulators, Acetylene, CGA510, 3,000 psig
Victor SR 250 Series Single Stage Medium Duty RegulatorsProduct DetailsCompact single stage constructionStem type seat mechanismDelrin® cap bushing for smooth adjustmentsExternal self reseating relief valve not designed to protect downstream apparatus
$
381.30
Qty:
Part #:841-341-0781-0527
- SR 450 Single Stage Heavy Duty Regulators, Inert Gas, CGA540, 3,000 psig
Victor SR 450 Series Single Stage Heavy Duty RegulatorsProduct DetailsMedium to high gas service capacitySingle stage designStem type seat mechanismDelrin® cap bushing for smooth adjustmentsExternal self reseating relief valve not designed to protect downstream apparatusTesting and ApprovalsUL Listed Conforms to CGA E-4
$
514.78
Qty:
Part #:841-341-0781-0584
- SR 450 Single Stage Heavy Duty Regulators, Acetylene, CGA510, 3,000 psig inlet
Victor SR 450 Series Single Stage Heavy Duty RegulatorsProduct DetailsMedium to high gas service capacitySingle stage designStem type seat mechanismDelrin® cap bushing for smooth adjustmentsExternal self reseating relief valve not designed to protect downstream apparatusTesting and ApprovalsUL Listed Conforms to CGA E-4
$
514.78
Qty:
Part #:841-230-14260
- Product Category ADHESIVES SEALANTS & TAPES
UPC Code 78143142604
$
34.21
Qty:
Part #:841-230-14280
- Product Category ADHESIVES SEALANTS & TAPES
UPC Code 78143142802
$
131.31
Qty:
Part #:511327
- Item Details
Victor® FM 300 Medium Capacity Single Gas Calibration Flow meter offers 30 - 100 SCFH flow range for carbon dioxide. Flow meter with 80 psig inlet pressure features 1/4" NPT(M) inlet fitting and 5/8"- 18 RH(F) outlet fitting. It is ideal for MIG/TIG welding and cover tube of the flow meter consist of overpressure protection. Flow tube and outer tube of the flow meter are made of impact resistant lexan.
Features
Gas flow measurement in SCFH
Flow tube and outer tube are made of impact resistant lexan for severe applications
Pressure compensated for low surge requirement
Cover tube contains overpressure protection
MIG/TIG applications
Applications
Industrial And General Fabrication
Light Fabrication
Repair And Maintenance
Structural Steel Fabrication
Caution
Not designed for cylinder use
Do not exceed calibrated inlet pressure
Product Attributes
Regulator Type
» Flowmeter Regulator
Gas Service
» Carbon Dioxide » CO2
Delivery Rate
» 30 - 100 scfh
Inlet Connection
» 1/4" NPT (Male)
Workload
» Medium Duty
Outlet Connection
» 5/8" - 18 (RH Female)
Qty:
Displaying: 1 - 21 of 21 Matching Items