Cutter
Electrical Equipment
View:
Active Filters :
- Main Category: Electrical Equipment
- Electrical Tools: Cutter Fish Tape
Part #:505102
- Cable Cutter
&bull High-leverage design for exceptional cutting capability of 4/0 aluminum, 2/0 soft copper, 100-pair 24 AWG communications cable&bull Precision, one-hand shearing action&bull Cable-gripping shear-type jaws&bull Perfect for working in confined spaces&bull Can be carried in most tool pouches&bull Beveled jaw tips provide proper mating and shearing action, which protects leading jaw edges&bull Through-hardened (not case-hardened) for longer-lasting cutting surfaces&bull Hot-riveted joint ensures smooth action and no handle wobble&bull Custom, US-made tool steel&bull Has a jaw capacity of 1.06'' (26.9 mm)
Qty:
Part #:505271
- Ratcheting Cable Cutter
&bull Reduced hand force for easier cutting&bull Patented two-step ratchet mechanism requires fewer strokes per cut&bull Cuts up to 600 MCM Copper and 750 MCM Aluminum&bull Quick release lever opens blades easily in every cutting position, to allow removal of the cable before completion of cut&bull Hardened steel cutting blades for lasting strength and sharpness&bull Locking lever keeps handles closed for easy transport fits in a tool box or bag&bull New higher cutting capacity and reduced hand force make it easier to cut large diameter cables&bull Cable Cutter Replacement Part List available for reference if needed
Qty:
Part #:504785
- End-Cutting Pliers, 8-Inch
&bull Wide throat clearance for clean, even, close range cutting of wire or nails&bull High-leverage design provides greater cutting power at the knives than other plier designs&bull Extended handles for longer reach and increased leverage&bull Hot-riveted joint for smooth action and no handle wobble&bull Forged steel for maximum durability&bull Made in the USA
Qty:
Part #:508516
- Multi Tool, Stripper, Crimper, Wire Cutter, 8-22 AWG
&bull Two wire cutters double the utility of this tool&bull Crimps 7-8 mm insulated and non-insulated terminals, lugs and splices&bull Cuts and strips 8-22 AWG solid and 10-26 AWG stranded wire&bull Cleanly shears bolts&bull Pivot nut adjusts tension&bull Full-sized, plastic-covered cushioned handles for comfort&bull Wire cutter in nose and below pivot&bull Crimping dies color-coded for easy identification
Qty:
Part #:511167
- Long Nose Multi Tool Wire Stripper, Wire Cutters, Crimping Tool
&bull Easily cuts and strips 10-22 AWG wire&bull Narrow, serrated plier jaws pull, loop and bend wire&bull Cleanly shears 4-40, 5-40, 6-32, 10-32 and 10-24 screws&bull Cutters and strippers are in front of the pivot to easily reach into tight places&bull Crimps insulated, non-insulated terminals and 7-8 mm ignition terminals&bull Plastic-covered cushioned handles for comfort
Qty:
Part #:506147
- Hand-Held Cable Cutter
Easily cuts heavier copper and aluminum cables up to 2/0 (70 mm²)
Precision-ground, shear-action, curved cutting blades
727 has PVC-covered, high-leverage handles for easier cuts
Heat-treated for long life
Made of heavy-duty forged steel
Rust-resistant black oxide finish
$
39.05
Qty:
Part #:510307
- 240' Steel Fish Tape
Oil-tempered spring steel for excellent fishing performance
Dirt-free tape finish keeps hands cleaner during use
Advanced comfort handle grip reduces fatigue
Superior rapid tape pay-out and rewind
Smaller Fish Eye with offset bend for improved fishing ability
Improved low profile tip for easy fishing through all sizes of conduit
Viewing Port gives visibility to remaining tape and ability to remove jobsite debris quickly
Rugged case design improves drop impact capability
Flared case with Grip Ridges for no slip handling
Fish tape is available in 50 FT (15
2 m), 65 FT (19
8 m), 125 FT (38
1 m) and 240 FT (73
2 m) lengths
1/8 IN, 1/4 IN and flat steel profiles to accommodate different fishing situations
$
115.80
Qty:
Part #:310704
- 100' S-Class® Fiberglass Fish Tape w/Metal Eyelet & Rapid-Pak® Case
S-Class® Fiberglass Fish Tapes are non-conductive, and the best choice when working near live circuits. A high quality fiberglass core provides column strength for optimum pushing and pulling capability. Its round shape allows an omni-directional capability perfect for multiple bends, or bends that change planes. Choose from three end types metal eyelet, a leader for even better maneuverability, and a nonconductive eyelet which prevents arc flash. Offered in two case choices our standard Tuff-Grip&trade Pro, as well as our own unique Rapid-Pak® design with an easy winder knob. Available in three lengths 50 ft., 100 ft., and 200 ft. Replacement tapes also available.
3/16" diameter
Non-conductive fish tape designed for use around live circuits
Strong S-Class® fiberglass core for strength and greater pushing power
Smooth nylon jacket protects fiberglass, and provides smooth surface for great handling around bends
Round shape provides omni-directional pushing through tough bends
Pulling strength 500 lbs.
Qty:
Part #:806744
- Diagonal Cutting Pliers, Semi-Flush, 6-Inch
&bull Trims plastic or printed circuit boards&bull Spring-loaded for self-opening action&bull Short jaws and beveled cutting edges permit close cutting of wire&bull Induction-hardened cutting knives for long life&bull Hot-riveted joint ensures smooth action and no handle wobble&bull Plastic-dipped handles for comfort and ease of identification&bull Custom, US-made tool steel
Qty:
Part #:300217
- Sir Nickless&trade Armored Cable Cutter
The Sir Nickless&trade protects armored cable wires by drawing the wires down, creating airspace above the wires and providing room for the cutter blade to shear through and sever the armored casing without nicking the wires within. The Sir Nickless&trade is unique in that it has a curved design that allows the wires to draw down providing room for the cutting blade. The cable Cutter works well on all popular types of armored cable up to 3/8 inch diameter.
Handles all common BX, MCAP®, MC and Flex cables
Blade cuts armor without damage to internal conductors
Splices cleanly through casings with only a few turns
Handle knob stores up to six replacement blades
$
48.16
Qty:
Part #:302953
- 120' Blued-Steel&trade Fish Tape w/Formed Hook & Tuff-Grip&trade Pro Case
Perfect for longer conduit runs, this fish tape boasts the highest tensile strength, and highest grade carbon steel for professional durability and reliability. The Blued-Steel&trade also provides rust and corrosion resistance for longer life. The Tuff-Grip&trade Pro case and handle are impact resistant, while the unique design keeps the wire inside the case, even after a long fall. Multiple width, length and eyelet options are available for ease of use for any application. Replacement tapes also available.
1/8" x .060"
Laser etched in 12 in. increments to provide instant conduit length (Tuff-Grip&trade Pro models only)
Unique "blued" finish is non-oily and resists rust
Industry's straightest wire
Stiffer for long runs
Tensile strength 1,600 lbs.
The Fish Tape square inlay with notched corner combined with an ergonomic handle is a registered trademark of IDEAL INDUSTRIES, INC. Reg. U.S. Pat. & Tm Off.
The blue color of the Fish Tape products is a registered trademark of IDEAL INDUSTRIES, INC. Reg. U.S. Pat. & Tm. Off.
$
55.27
Qty:
Part #:300240
- Replacement Blade, BX Cutter, 1/pack
Handles all common BX, MCAP®, MC and Flex cables
Blade cuts armor without damage to internal conductors
Splices cleanly through casings with only a few turns
Handle knob stores up to six replacement blades
$
39.25
Qty:
Part #:509622
- 100' Nylon Fishtape
Non-conductive, curl resistant nylon tape for fast, clean fishing
Good for fishing in conduit with wire or cable present
Rugged case design improves drop impact capability
Advanced comfort handle grip reduces fatigue
Nylon fish tape is intended for fishing only
Rope or line is recommended for pulling
$
143.10
Qty:
Part #:500934
- 100' REEL-X Non-Conductive Fish Tape
Free-spinning interior reel for faster fishing
Utilize secondary exit and set case on the ground to free-up both hands for fishing
Anti-Bind Design
Quick-Change replacement reels
Fatigue/Strain reducing ergonomic case design
Bulk Pack Available (Qty 3) - FTXF-100BP
Compatible Replacement Reels RFTXF-50, RFTXF-100
$
251.45
Qty:
Part #:500095
- Utility Cable Cutter
Cable Cutters cuts 350 MCM Copper and 350 MCM Aluminum cable
Shears made of forged steel with black-oxide finish for long life
Shear-type hook jaws grab and hold cable while shear-cutting action makes clean cuts
Made in USA with beveled tips for positive mating
Hinge bolt with pin-set nut for proper blade tension
Non-slip vinyl grips
Does not cut steel or ACSR
This Utility Cable Cutter features shear-cutting blades that cut 350 MCM Copper and 350 MCM Aluminum cable. Made from forged steel with black-oxide finish for long life. Shear-type hook jaws grab and hold cable. Non-slip vinyl grips on 16-Inch handles keep this tool safely in your hands. Does not cut steel or ACSR.
Qty:
closeout
$49.66 MSRP
$
34.76
Part #:500025
- CLOSEOUTS Only 1 Left!
- Diagonal Cutting Pliers, Heavy-Duty, Tapered Nose, 7-Inch
Diagonal Cutters have heavy-duty tapered nose design
Pliers with 1-Inch jaws easily reach into confined spaces
Short jaws and beveled cutting edges permit close cutting of wire
Induction-hardened, standard cutting knives for long life
Forged in the USA with custom, US-made tool steel
Hot-riveted joint ensures smooth action and no handle wobble
Handform handles for comfort and ease of identification
These Heavy Duty, Diagonal-Cutting Pliers come with a 1-Inch tapered nose design. The pliers are made of US-made steel and have induction hardened beveled cutting edges for added durability. They also have plastic dipped handles and a hot-riveted joint for added comfort and no handle wobble while working.
Qty:
Part #:509620
- 65' Steel Fish Tape
Oil-tempered spring steel for excellent fishing performance
Dirt-free tape finish keeps hands cleaner during use
Advanced comfort handle grip reduces fatigue
Superior rapid tape pay-out and rewind
Smaller Fish Eye with offset bend for improved fishing ability
Improved low profile tip for easy fishing through all sizes of conduit
Viewing Port gives visibility to remaining tape and ability to remove jobsite debris quickly
Rugged case design improves drop impact capability
Flared case with Grip Ridges for no slip handling
Available in 50 FT (15
2 m), 65 FT (19
8 m), 125 FT (38
1 m) and 240 FT (73
2 m) lengths
1/8 IN, 1/4 IN and flat steel profiles to accommodate different fishing situations
$
56.15
Qty:
Part #:509621
- 125' Steel Fish Tape
Oil-tempered spring steel for excellent fishing performance
Dirt-free tape finish keeps hands cleaner during use
Advanced comfort handle grip reduces fatigue
Superior rapid tape pay-out and rewind
Smaller Fish Eye with offset bend for improved fishing ability
Improved low profile tip for easy fishing through all sizes of conduit
Viewing Port gives visibility to remaining tape and ability to remove jobsite debris quickly
Rugged case design improves drop impact capability
Flared case with Grip Ridges for no slip handling
Available in 50 FT (15
2 m), 65 FT (19
8 m), 125 FT (38
1 m) and 240 FT (73
2 m) lengths
1/8 IN, 1/4 IN and flat steel profiles to accommodate different fishing situations
$
83.50
Qty:
Part #:500364
- 50' Steel Fish Tape - 5 Pack
Oil-tempered spring steel for excellent fishing performance
Dirt-free tape finish keeps hands cleaner during use
Advanced comfort handle grip reduces fatigue
Superior rapid tape pay-out and rewind
Smaller fish eye with offset bend for improved fishing ability
Improved low profile tip for easy fishing through all sizes of conduit
Viewing port gives visibility to remaining tape and ability to remove jobsite debris quickly
Rugged case design improves drop impact capability
Flared case with grip ridges for no slip handling
Available in 50 FT (15
2 m), 65 FT (19
8 m), 125 FT (38
1 m) and 240 FT (73
2 m) lengths
1/8 IN, 1/4 IN and flat steel profiles to accommodate different fishing situations
$
28.25
Qty:
closeout
$
87.90
Qty:
Part #:539-31-061
- 100' S-Class® Fiberglass Fish Tape w/Leader & Tuff-Grip&trade Pro Case
S-Class® Fiberglass Fish Tapes are non-conductive, and the best choice when working near live circuits. A high quality fiberglass core provides column strength for optimum pushing and pulling capability. Its round shape allows an omni-directional capability perfect for multiple bends, or bends that change planes. Choose from three end types metal eyelet, a leader for even better maneuverability, and a nonconductive eyelet which prevents arc flash. Offered in two case choices our standard Tuff-Grip&trade Pro, as well as our own unique Rapid-Pak® design with an easy winder knob. Available in three lengths 50 ft., 100 ft., and 200 ft. Replacement tapes also available.
3/16" diameter
Non-conductive fish tape designed for use around live circuits
Strong S-Class® fiberglass core for strength and greater pushing power
Smooth nylon jacket protects fiberglass, and provides smooth surface for great handling around bends
Round shape provides omni-directional pushing through tough bends
Pulling strength 500 lbs.
The Fish Tape square inlay with notched corner combined with an ergonomic handle is a registered trademark of IDEAL INDUSTRIES, INC. Reg. U.S. Pat. & Tm Off.
The blue color of the Fish Tape products is a registered trademark of IDEAL INDUSTRIES, INC. Reg. U.S. Pat. & Tm Off.
Qty:
Part #:539-31-087
- 100' S-Class® Fiberglass Fish Tape w/Non-Conductive Eyelet & Tuff-Grip&trade Pro Case
S-Class® Fiberglass Fish Tapes are non-conductive, and the best choice when working near live circuits. A high quality fiberglass core provides column strength for optimum pushing and pulling capability. Its round shape allows an omni-directional capability perfect for multiple bends, or bends that change planes. Choose from three end types metal eyelet, a leader for even better maneuverability, and a nonconductive eyelet which prevents arc flash. Offered in two case choices our standard Tuff-Grip&trade Pro, as well as our own unique Rapid-Pak® design with an easy winder knob. Available in three lengths 50 ft., 100 ft., and 200 ft. Replacement tapes also available.
The Fish Tape square inlay with notched corner combined with an ergonomic handle is a registered trademark of IDEAL INDUSTRIES, INC. Reg. U.S. Pat. & Tm Off.
The blue color of the Fish Tape products is a registered trademark of IDEAL INDUSTRIES, INC. Reg. U.S. Pat. & Tm Off.
3/16" diameter
Non-conductive fish tape designed for use around live circuits
Strong S-Class® fiberglass core for strength and greater pushing power
Smooth nylon jacket protects fiberglass, and provides smooth surface for great handling around bends
Round shape provides omni-directional pushing through tough bends
Pulling strength 500 lbs.
Qty:
Part #:539-31-088
- 200' S-Class® Fiberglass Fish Tape w/Non-Condutive Eyelet & Tuff-Grip&trade Pro Case
S-Class® Fiberglass Fish Tapes are non-conductive, and the best choice when working near live circuits. A high quality fiberglass core provides column strength for optimum pushing and pulling capability. Its round shape allows an omni-directional capability perfect for multiple bends, or bends that change planes. Choose from three end types metal eyelet, a leader for even better maneuverability, and a nonconductive eyelet which prevents arc flash. Offered in two case choices our standard Tuff-Grip&trade Pro, as well as our own unique Rapid-Pak® design with an easy winder knob. Available in three lengths 50 ft., 100 ft., and 200 ft. Replacement tapes also available.
The Fish Tape square inlay with notched corner combined with an ergonomic handle is a registered trademark of IDEAL INDUSTRIES, INC. Reg. U.S. Pat. & Tm Off.
The blue color of the Fish Tape products is a registered trademark of IDEAL INDUSTRIES, INC. Reg. U.S. Pat. & Tm Off.
3/16" diameter
Non-conductive fish tape designed for use around live circuits
Strong S-Class® fiberglass core for strength and greater pushing power
Smooth nylon jacket protects fiberglass, and provides smooth surface for great handling around bends
Round shape provides omni-directional pushing through tough bends
Pulling strength 500 lbs.
Qty:
Displaying: 1 - 23 of 23 Matching Items