Greenlee
Electrical Equipment
View:
Active Filters :
- Main Category: Electrical Equipment
- Brand: Greenlee Klein
Part #:505102
- Cable Cutter
&bull High-leverage design for exceptional cutting capability of 4/0 aluminum, 2/0 soft copper, 100-pair 24 AWG communications cable&bull Precision, one-hand shearing action&bull Cable-gripping shear-type jaws&bull Perfect for working in confined spaces&bull Can be carried in most tool pouches&bull Beveled jaw tips provide proper mating and shearing action, which protects leading jaw edges&bull Through-hardened (not case-hardened) for longer-lasting cutting surfaces&bull Hot-riveted joint ensures smooth action and no handle wobble&bull Custom, US-made tool steel&bull Has a jaw capacity of 1.06'' (26.9 mm)
Qty:
Part #:505271
- Ratcheting Cable Cutter
&bull Reduced hand force for easier cutting&bull Patented two-step ratchet mechanism requires fewer strokes per cut&bull Cuts up to 600 MCM Copper and 750 MCM Aluminum&bull Quick release lever opens blades easily in every cutting position, to allow removal of the cable before completion of cut&bull Hardened steel cutting blades for lasting strength and sharpness&bull Locking lever keeps handles closed for easy transport fits in a tool box or bag&bull New higher cutting capacity and reduced hand force make it easier to cut large diameter cables&bull Cable Cutter Replacement Part List available for reference if needed
Qty:
Part #:504785
- End-Cutting Pliers, 8-Inch
&bull Wide throat clearance for clean, even, close range cutting of wire or nails&bull High-leverage design provides greater cutting power at the knives than other plier designs&bull Extended handles for longer reach and increased leverage&bull Hot-riveted joint for smooth action and no handle wobble&bull Forged steel for maximum durability&bull Made in the USA
Qty:
Part #:503335
- Wire Stripper/Cutter (10-18 AWG Solid)
&bull Cuts, strips, loops and gauges 10-18 AWG solid wire&bull Spring-loaded action for self-opening&bull Easy-to-read wire gauge markings on both sides for stripping in either direction&bull Hardened steel with precision ground stripping holes&bull Wire looping and bending holes&bull Black-oxide finish resists corrosion&bull Textured handles provide a firm, comfortable grip&bull Color-coded handles red indicates stranded wire, yellow indicates solid wire&bull Shear-type cutting blades for clean cuts.
Qty:
Part #:306067
- Solid and Stranded Copper Wire Stripper and Cutter
Cuts, strips, and loops 10-18 AWG Solid and 12-20 AWG Stranded wire and cleanly shears 6-32 and 8-32 screws
Precision ground stripping holes
Strong-gripping serrated nose for easy bending, shaping, and pulling of wire
Holes for looping and bending wire
Made in USA
Shear-type cutting blades for clean cuts
Double-dipped comfort grips with curved handles
Coil spring provides fast self-opening action
Easy-to-read markings
Handy closure lock for convenient storage
Qty:
Part #:501642
- Crimping and Cutting Tool for Connectors
&bull Crimps 10 to 22 AWG insulated and non-insulated terminals&bull Specially hardened wire cutter in nose&bull Tapered nose design for working in confined spaces&bull Crimping die marked for insulated and non-insulated solderless terminals and connectors&bull Plastic-dipped, cushioned handles for comfort
Qty:
Part #:501617
- Crimping and Cutting Tool for Non-Insulated Terminals
&bull Crimps non-insulated 10 to 22 AWG solderless terminals and connectors&bull Specially hardened wire cutter in nose&bull Tapered nose for working in confined spaces&bull Plastic-dipped, cushioned handles for comfort&bull Forged steel for maximum durability&bull Hot-riveted joint for smooth action and no handle wobble
Qty:
Part #:508516
- Multi Tool, Stripper, Crimper, Wire Cutter, 8-22 AWG
&bull Two wire cutters double the utility of this tool&bull Crimps 7-8 mm insulated and non-insulated terminals, lugs and splices&bull Cuts and strips 8-22 AWG solid and 10-26 AWG stranded wire&bull Cleanly shears bolts&bull Pivot nut adjusts tension&bull Full-sized, plastic-covered cushioned handles for comfort&bull Wire cutter in nose and below pivot&bull Crimping dies color-coded for easy identification
Qty:
Part #:511167
- Long Nose Multi Tool Wire Stripper, Wire Cutters, Crimping Tool
&bull Easily cuts and strips 10-22 AWG wire&bull Narrow, serrated plier jaws pull, loop and bend wire&bull Cleanly shears 4-40, 5-40, 6-32, 10-32 and 10-24 screws&bull Cutters and strippers are in front of the pivot to easily reach into tight places&bull Crimps insulated, non-insulated terminals and 7-8 mm ignition terminals&bull Plastic-covered cushioned handles for comfort
Qty:
Part #:510307
- 240' Steel Fish Tape
Oil-tempered spring steel for excellent fishing performance
Dirt-free tape finish keeps hands cleaner during use
Advanced comfort handle grip reduces fatigue
Superior rapid tape pay-out and rewind
Smaller Fish Eye with offset bend for improved fishing ability
Improved low profile tip for easy fishing through all sizes of conduit
Viewing Port gives visibility to remaining tape and ability to remove jobsite debris quickly
Rugged case design improves drop impact capability
Flared case with Grip Ridges for no slip handling
Fish tape is available in 50 FT (15
2 m), 65 FT (19
8 m), 125 FT (38
1 m) and 240 FT (73
2 m) lengths
1/8 IN, 1/4 IN and flat steel profiles to accommodate different fishing situations
$
115.80
Qty:
Part #:306243
- Insulated 1/8-Inch Slotted Screwdriver, 4-Inch
Perfect for working in control boxes or other terminal block applications where insulated tools are necessary
1000V Rated for safety
Meets or exceeds IEC 60900 2012, ASTM F1505-10
Durable, two-layer, molded insulation to meet or exceed all ASTM and IEC standards for insulated tools
Made in USA with custom US-made tool steel
Cushion-Grip&trade handle for superior torque and comfort
Made in the USA
Protect yourself when working near an energized source. Clearly marked with the official 1000-volt rating symbol, Klein insulated tools exceed IEC 60900 and ASTM F1505 standards for insulated tools. Two layers of insulation provide protection against electric shock. Perfect for working in control boxes or other terminal block applications where insulated tools are necessary.
Qty:
Part #:306233
- Dual Range Non-Contact Voltage Tester with Flashlight, 12 - 1000V AC
Voltage Tester provides non-contact detection of low voltage in security, entertainment, communications, environmental control, and irrigation systems
Detects voltage with simultaneous visual and audible voltage indicators
Bright flashlight illuminates work area and may be used independent of voltage detection function
Green light indicates no voltage
Lightweight, compact tool with pocket clip provides convenient storage and quick access
Auto power-off feature conserves and extends battery life
CAT IV 1000V rating provides expanded operation and protection
Screw-thread battery cap with O-ring ensures protection against dust and water ingress
6.6-Foot (2 m) drop protection
IP67 Dustproof and waterproof
Conforms to CE requirements
US Patent 10,073,142, D750,985 and other patents pending
The NCVT-3P is a non-contact voltage tester with an integrated flashlight. The voltage sensor detects 12 to 1000V AC and indicates the presence of voltage in cables, cords, circuit breakers, light fixtures, switches, outlets and wires as well as AC voltage in doorbells, thermostats, low voltage lighting and irrigation systems. Includes both visual and audible signals. The NCVT-3P is rugged enough for any job site.
Qty:
Part #:806744
- Diagonal Cutting Pliers, Semi-Flush, 6-Inch
&bull Trims plastic or printed circuit boards&bull Spring-loaded for self-opening action&bull Short jaws and beveled cutting edges permit close cutting of wire&bull Induction-hardened cutting knives for long life&bull Hot-riveted joint ensures smooth action and no handle wobble&bull Plastic-dipped handles for comfort and ease of identification&bull Custom, US-made tool steel
Qty:
Part #:500282
- Wire Stripper/Cutter 10-20 Solid, 12-22 AWG Stranded
Cuts, strips, loops and bends 10-20 AWG solid and 12-22 AWG stranded wire
Shear-type cutting for clean cuts
Serrated nose jaws to bend, shape, or pull wire holes for looping wire ends
Spring-loaded for self-opening action and comfortable, plastic-covered handles
Made in USA
The versatile Klein Tools Multi-Purpose Wire Stripper and Cutter can strip six standard wire sizes without nicking the wire. The scissor action of the cutting jaw makes clean cuts with little effort. Plastic-covered handles are comfortable to use.
Qty:
Part #:306147
- 1/4-Inch Cabinet Tip Insulated Screwdriver, 4-Inch
1000V rated for safety
Durable, flame-retardant, molded dual-layer insulation
Custom US-made tool steel
Cushion-Grip&trade handle for superior torque and comfort
Made in the USA
Protect yourself when working near an energized source. Clearly marked with the official 1000-volt rating symbol, Klein insulated tools exceed IEC 60900 and ASTM F1505 standards for insulated tools. Two layers of insulation provide protection against electric shock. Built to handle the tough jobs with ease.
Qty:
Part #:306161
- Insulated Screwdriver, #2 Phillips Tip, 4-Inch
1000V rated for safety
Durable, two-layer, molded insulation to meet or exceed all ASTM and IEC standards for insulated tools
Cushion-Grip&trade handles for greater torque and comfort
Custom US-made steel
Made in USA
The Klein Tools #2 Insulated Phillips Head Screwdriver provides safe electrical insulation up to 1,000-Volt. This screwdriver features 2 layers of insulation around a steel construction to ensure dielectric protection and impact resistance. Cushion-Grip&trade handle ensures excellent torque and comfort.
Qty:
Part #:508126
- Conduit Fitting and Reaming Screwdriver
&bull Hooded-blade design keeps tip from slipping out of screws, especially when tightening hard-to-reach conduit fittings thicker hood is designed for rugged use&bull Reams and smooths 1/2-Inch (13 mm), 3/4-Inch (19 mm), and 1-Inch (25 mm) thin-wall conduit ends to protect wire and permit correct installation of fittings&bull Reams both the inside and outside of the conduit at the same time&bull Longer Cushion-Grip handle provides comfort and more torque for reaming&bull Replaceable reaming blade is now held in place with a 1/16-Inch hex socket set screw&bull Designed to be used on Electrical Metallic Tubing (EMT)
Qty:
Part #:501682
- Slug-Buster® 1/2" Conduit Size Replacement Punch
Made in USA
Alignment Markings improve punching accuracy and productivity
Punches and dies are clearly marked for quick part identification
$
34.30
Qty:
Part #:504951
- Standard Round 1/2" - 1-1/4" Manual Knockout Set
For use with new Greenlee KRW-1 high-leverage ratchet wrench
Slug-Buster® punch profile splits slugs for easy slug removal
Knurled edge on punches for better grip
New die design optimized for widest range of materials and drivers
Easy threading - draw studs with "dog point" tip helps eliminate cross-threading.
Knockout set punches, dies and case made in the USA
Draw stud manufactured in the USA from US and global components
Laser markings for quick part identification. Alignment markings for improved accuracy.
$
299.00
Qty:
Part #:500437
- 1/2" Conduit Size Slug-Buster® Manual Knockout Set
Unique punch profile splits slugs allowing for easy slug removal
Knurled edge for better grip
Laser markings for quick part identification
Alignment markings for improved accuracy
Punch and die Made in USA
Replaces 60246
$
60.60
Qty:
Part #:500493
- 3/4" Conduit Size Slug-Buster® Manual Knockout Set
Unique punch profile splits slugs allowing for easy slug removal
Knurled edge for better grip
Knockout sets are laser marked for quick part identification
Alignment markings for improved accuracy
Punch and die Made in USA
Replaces 7211BB-3/4
$
78.75
Qty:
Part #:511006
- Digital Light Meter
Measures incandescent, fluorescent, metal halide, high-pressure sodium and halogen lamp output
Color and cosine-corrected for enhanced accuracy
Measures up to 50,000 lux
Peak and data hold means no lost measurements
Accessories included (1) 9V battery and carrying case
Lifetime Limited Warranty
$
261.55
Qty:
Part #:804724
- 1/2" EMT Hand Bender
Bends offsets in one easy operation
Insert conduit, depress handle, release and remove conduit Makes identical offsets every time for wall mounted boxes with exposed conduit Creates offset that matches the knockout in box Maximum offset of 0
.56" (9/16)
$
351.55
Qty:
Part #:501961
- Ratchet Reel Stand 28" - 46-5/8" (711 mm - 1184 mm)
Ratchet mechanism to easily raise or lower the height
Roller bearings fit in the spindle groove to keep the spindle in place and turning freely
Two stands and a spindle are required for a complete setup
$
1,085.15
Qty:
Displaying: 1 - 24 of 53 Matching Items