MSA
General Tools
View:
Active Filters :
- Manufacturer: General Tools MSA
Part #:841-454-10009971
- Confidence Plus Germicidal Cleaners, MSA Respirators
Confidence Plus 2 is a multipurpose, one-step germicidal detergent that is the recommended cleaner sanitizer for MSA PPE and respiratory equipment. ConfidencePlus 2 is a quaternary ammonium based, EPA-registered (#47371-130-4204) disinfectant and is effective against multiple pathogens including SARS-associatedCoronavirus.&bull Used for cleaning and disinfection of respirators and other PPE such as headgear, faceshields and hearingprotection. May be wiped on hard surfaces of respirator cartridges &bull Confidence Plus 2 may also be used as a disinfectant in schools, hospitals, nursing homes or other institutionalsettings.&bull One bottle makes 32 gallons of disinfecting solution.&bull The use-solution may be applied with a mop, sponge or spray.&bull May not be used for sterilization of medical devices.&bull The packaged product does not have an expiration diluted product in solution is shelf-stable for up to 1 year.&bull See respirator instruction manual for cleaning and disinfection instructionsof respirators.
$
171.00
CASE
Qty:
Part #:510047
- V-Gard HDPE Frame for MSA Slotted Caps, w/o Debris Control, Black
Part Number
10121266
Color
BLACK
Size
ONE SIZE FITS ALL
Length
8.031 IN (204.000 MM)
Width
11.417 IN (290.000 MM)
Height
4.646 IN (118.000 MM)
Weight
0.265 LB (0.120 KG)
Approvals
ANSI/ISEA Z87.1-2015 CSA Z94.3 EN 166 AS/NZS 1337
$
16.81
Qty:
Part #:522300
- MSA 13016 FogPruf 4 oz Spray Lens CleanerPrevents glasses, goggles, and face-piece lenses from foggingEffectively keeps lenses bright and cleanDesigned for fast, easy, convenient clean-up4 oz bottle 15% Isopropyl Alcohol
$
18.00
Qty:
Part #:804543
- Tap Wrench for No. 0 to 1/4 In. Taps
The #164 Tap Wrench for No. 0 to 1/4 In. Taps is designed to hold and turntaps&mdashtools that cut threads on the inner surface of a hole or pipe&mdashor other small tools, such as hand reamers and screw extractors.
Length 2-7/8 in.
Qty:
Part #:502753
- The #300/1 Industrial Precision 6 In. Flexible Steel Rule can make very precise measurements.
Features
Ultra-fine black graduations
Polished stainless steel finish
Pocket clip
Includes
Plastic sleeve
Dimensions
6 x 3-7/8 in.
Qty:
Part #:800387
- Five-blade Screwdriver Set
The #S605 Five-blade Screwdriver Set includes slotted and crosspoint blades.
Qty:
closeout
$9.84 MSRP
$
8.97
Part #:510965
- CLOSEOUTS Only 3 Left!
- Tungsten Carbide Point Scriber/Etching Pen with MagnetThe #88CM Tungsten Carbide Point Scriber/Etching Pen with Magnet can mark and scribe steel, ceramic and glass. The magnet can retrieve small ferrous and steel parts and chips from hard-to-reach places.
Point diameter 1/16 in. (1.6mm)
Qty:
Part #:841-318-71264
-
The #71264 1/2 In. Grommet Kit is ideal for repairing canvas, tarpaulins, tents, awnings, sailcloth, lawn furniture and pool covers. - See more at https//www.generaltools.com/1-2-in-grommet-kit#sthash.ALqfRhVy.dpuf
The #71264 1/2 In. Grommet Kit is ideal for repairing canvas, tarpaulins, tents, awnings, sailcloth, lawn furniture and pool covers. - See more at https//www.generaltools.com/1-2-in-grommet-kit#sthash.ALqfRhVy.dpuf
Qty:
$
241.52
Qty:
Part #:512032
- Magnetic Pick Up Tool with Rigid Or Flexible Shaft Extends From 18-inches to 32-Inched, 2lb Pull Capacity Grabber/Retrieving Magnet
Ideal for retrieving steel and iron parts from hard-to-reach and see work areas, the General Tools 384N Flexible Telescoping Magnetic Pick-Up is a great combination tool for retrieving lost items from confined areas. Equipped with a powerful 2 lb. pull Neodymium magnet the shaft can be either rigid or flexible by simply unscrewing the handle and removing the steel shaft. Without the shaft, the pick can easily snake around objects to retrieve lost items. The shaft can extend from 18" (457mm) to 32" (813mm).
Qty:
Part #:807557
- ANGLE-IZER® Contour Gauge, Profile Gauge, Shape Duplicator, 10-Inch
PRECISE SHAPE DUPLICATION- Easily copy any shape or duplicate a profile exactly for woodworking or tile flooring/linoleum installation where you want to replicate the shape of moldings or match cut outs around door casings and pipe
PERFECT PROFILES- 3" (76mm) deep fingers will measure profiles up to 1-1/4" (32mm) precisely record the cross-sectional shape of a surface
EXTRA LENGTH- 10&rdquo gauge is ideal for woodworking, linoleum installation, ceramic tile installation or any job where contour duplication is essential
Qty:
Part #:507204
- Product Description
The #SPC75 4 In. Drive Pin Punches, Eight-piece Set is ideal for removing metal pins from holes in machine shops and motor service bays.
Features
Made of hardened, tempered and heat-treated tool steel
Ground square ends
Knurled finger grips
Qty:
Part #:804527
- Drill Bit Gauge, 1/16&rdquo to ½&rdquo By 64ths Fractional Size With Decimal Equivalents, Stainless Steel
The 14 Drill Gauge helps to quickly and conveniently determine the size of a fractional drill bit. The durable, stainless steel gauge measures drill bits from 1/16 in. to ½ in. by 64ths. The sizes are all permanently etched into the gauge and also show the criminal equivalents. The gauge&rsquos size is 6-1/2 x 2-1/2 inches wide.
6-1/2 x 2-1/2 in.Accuracy ±1/64 in
Qty:
closeout
$8.72 MSRP
$
8.36
Part #:804511
- CLOSEOUTS Only 1 Left!
- Product Description
The #818 Scratch Awl is ideal for scribing and layout work, starting screw holes and piercing soft materials.
Blade length 2-3/4 in.
Overall length 6-1/2 in.
Qty:
Part #:804517
- Drill Bit Grinding AttachmentThe #825 Drill Bit Grinding Attachment can hone drill bits to their original sharpness, extending their life and improving drilling accuracy.
Works with 1/8 to 3/4 in., #1 to #30, A to Z, and 3 to 19mm drill bits
Qty:
Part #:800083
- 24 in. Lighted Mechanical PickupThe #70396 24 In. Lighted Mechanical Pickup is ideal for retrieving items from dark or hard-to-reach places.
Qty:
closeout
$12.47 MSRP
$
11.95
Part #:800086
- CLOSEOUTS Only 3 Left!
- Lighted Tweezer with Smooth Point Tip
The #70401 Lighted Tweezer with Smooth Point Tip is ideal for retrieving items from dark or hard-to-reach places.
Qty:
Part #:812217
- Automatic Center PunchThe #77 Automatic Center Punch can punch, mark, scribe and start drill, nail or screw holes. It is ideal for machinists and automotive repair pros.
Qty:
Part #:814555
- Replacement Point for #78 Heavy-duty Center Punch
Point diameter 0.083 in. (2.1mm)
Qty:
Part #:512030
- Product Description
The #80 Fixed Two Point Scriber is preferred by machinists, engravers, mechanics and craftspeople for use on metal, glass, plastics and ceramics.
Features
Aluminum body with knurled finger grip and two fixed, hardened and ground steel points straight and 90°
Qty:
Part #:804477
- Tungsten Carbide Point Scriber/Etching PenThe #88 Tungsten Carbide Point Scriber/Etching Pen can mark and scribe steel, ceramic and glass.
Point diameter 1/16 in. (1.6mm)
Qty:
closeout
$14.61 MSRP
$
13.99
Part #:804542
- CLOSEOUTS Only 1 Left!
- Tap Wrench for No. 0 to No. 8 Taps
The #163 Tap Wrench for No. 0 to No. 8 Taps is designed to hold and turntaps&mdashtools that cut threads on the inner surface of a hole or pipe&mdashor other small tools, such as hand reamers and screw extractors.
Length 2-1/4 in.
Qty:
Part #:804544
- Tap Wrench for No. 12 to 1/2 In. Taps
The #166 Tap Wrench for No. 12 to 1/2 In. Taps is designed to hold and turn taps&mdashtools that cut threads on the inner surface of a hole or pipe&mdashor other small tools, such as hand reamers and screw extractors.
Length 3-3/4 in.
Qty:
Part #:815444
- Outside Caliper can measure outside dimensions.
Measurement range 0 to 6-5/16 in.
Reach 6-1/8 in.
Qty:
Displaying: 1 - 24 of 53 Matching Items