1/2in
HVAC and Plumbing
View:
Active Filters :
- Main Category: HVAC and Plumbing
- Size: 1/2in 3/4in 6in
Qty:
Part #:521536
- In-Line Lubricator Attributes
Maximum Operating Pressure
500 PSI at 70°F (21°C)
Weight
0.88 lb
Female Thread Size Metric
15mm
Material
Aluminum
Capacity
1.4 fluid oz. oil (40ml)
Female Thread
NPT
Flow
30 SCFM
Female Thread Size
1/2"
$
77.07
Qty:
Part #:604221
-
This 1/2 inch lead free small water pressure regulator is used in small general purpose applications to regulate water pressure in piping systems using water and No. 2 fuel oil. It has an oversized orifice and is ideally used on beverage dispensing and paint spraying equipment, ice cube machines, humidifiers, drinking fountains, and other small process applications. It consists of a lead free brass body with an adjusting tee handle, NPT threaded female connections, two-way low water pressure gauge port, aluminum spring cage, Buna-N stainless steel disc, and a reinforced Buna-N diaphragm. The reduced water pressure range is 1 to 25 psi (0.1 to 1.7 bar) and is factory set at 10 psi (0.7 bar).
Product Features
Oversized orifice
NPT threaded female inlet and outlet connections
Tee handle adjustment
Lead free brass body
Stainless steel stem and spring
Maximum working pressure is 300 psi (21 bar)
Temperature range is 0 to 140 degrees F (-18 to 60 degrees C)
Qty:
Part #:700506
-
This 3/4 inch steam radiator gate valve is used as a shutoff valve in steam or hydronic heating systems. It feature a bronze body with thread x male union connections.
Bronze body
Thread x male union connections
Rising stem
Solid wedge
Qty:
Part #:100146
-
This 3/4 inch bronze automatic reseating temperature and pressure relief valve with a 5 inch thermostat is installed directly in tank tapings and is used in commercial applications to provide automatic temperature and pressure protection for hot water supply tanks and hot water heaters. It features a bronze body with NPT male inlet and NPT female outlet connections, thermo-bonded coated thermostat, tamper resistant bonnet screws, automatic reseating feature, and test lever. The temperature relief is 210 degrees (99 degrees C) and the pressure relief is 150 psi.
Product Features
Thermo-bonded thermostat
Non-mechanical seat to disc alignment
Tamper resistant bonnet screws
Thermostat is accurate and proven
Qty:
Qty:
Qty:
Qty:
Qty:
Part #:605681
-
This 3/4 inch lead free temperature and pressure relief valve is designed to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU per hour. This two in one relief valve provides a proven and cost effective means to protect against excessive temperature and pressure emergency conditions. It features a lead free copper alloy body with NPT male inlet and NPT female outlet connections, a unique thermostat with special thermo-bonded coating, and test lever. The temperature relief is 210 degrees F (99 degrees C) and the pressure relief is set at 150 psi (10.3 bar).
Product Features
ASME rated and CSA listed
Extension thermostat with thermo-bonded coating
Stainless steel spring
Lead free copper alloy body
Qty:
Qty:
Qty:
Qty:
Qty:
Part #:700505
- This 1/2 inch steam radiator gate valve is used as a shutoff valve in steam or hydronic heating systems. It feature a bronze body with thread x male union connections.
Bronze body
Thread x male union connections
Rising stem
Solid wedge
Qty:
Qty:
Displaying: 1 - 24 of 32 Matching Items