1/4in
HVAC and Plumbing
View:
Active Filters :
- Main Category: HVAC and Plumbing
- Size: 1/4in 2in 3/4in 10in
Qty:
Part #:700506
-
This 3/4 inch steam radiator gate valve is used as a shutoff valve in steam or hydronic heating systems. It feature a bronze body with thread x male union connections.
Bronze body
Thread x male union connections
Rising stem
Solid wedge
Qty:
Part #:100146
-
This 3/4 inch bronze automatic reseating temperature and pressure relief valve with a 5 inch thermostat is installed directly in tank tapings and is used in commercial applications to provide automatic temperature and pressure protection for hot water supply tanks and hot water heaters. It features a bronze body with NPT male inlet and NPT female outlet connections, thermo-bonded coated thermostat, tamper resistant bonnet screws, automatic reseating feature, and test lever. The temperature relief is 210 degrees (99 degrees C) and the pressure relief is 150 psi.
Product Features
Thermo-bonded thermostat
Non-mechanical seat to disc alignment
Tamper resistant bonnet screws
Thermostat is accurate and proven
Qty:
Qty:
Qty:
Qty:
Part #:521535
- B07 Series 1 FRLs Miniature Filter/Regulator Attributes
Pressure Range
5-100 PSI
Weight
0.65 lb
Mandatory Package/Box Quantity
1
Inlet Pressure
150 PSI maximum
Maximum Temperature
125°F (51°C)
Flow
24 SCFM
Port
1/4"
$
86.98
Qty:
Qty:
$
36.26
Qty:
Part #:605681
-
This 3/4 inch lead free temperature and pressure relief valve is designed to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU per hour. This two in one relief valve provides a proven and cost effective means to protect against excessive temperature and pressure emergency conditions. It features a lead free copper alloy body with NPT male inlet and NPT female outlet connections, a unique thermostat with special thermo-bonded coating, and test lever. The temperature relief is 210 degrees F (99 degrees C) and the pressure relief is set at 150 psi (10.3 bar).
Product Features
ASME rated and CSA listed
Extension thermostat with thermo-bonded coating
Stainless steel spring
Lead free copper alloy body
Qty:
Qty:
Qty:
Qty:
Qty:
Part #:334-B18-02AGMB
- Wilkerson FRLs B18-Series Compact Filter/Regulator
Attributes
Maximum Operating Pressure Metric
17.2 Bar
Maximum Operating Pressure
250 PSIG
Weight
1.94 lb
Break Quantity
1
Mandatory Package/Box Quantity
1
Temperature Range
32°F to 150°F (0°C to 65.5°C)
Flow
148 SCFM
Port
1/4"
$
172.53
Qty:
Part #:559118
- The LFMMVM1 Thermostatic Mixing Valves maintain and limit mixed hot water to a desired, selectable temperature. The LFMMVM1 valves can be set to any temperature between 80°F and 120°F with flow rates as low as 0.5 gpm and as high as 12 gpm (refer to capacity chart on back). This mixing valve series is listed under ASSE 1017 for valves used in hot water source applications, ASSE 1069 for single-pipe, tempered water applications and ASSE 1070 for valves used in individual or multiple fixture applications and also listed IAPMO cUPC. The LFMMVM1's feature Lead Free construction to comply with Lead Free installation requirements. The LFMMVM1 uses a double throttling design to control both the hot and cold water supply to the mixed outlet. The superior flow characteristics of this valve provide accurate temperature control (±3°F) with low pressure drop across the rated flow range. As an added feature, the LFMMVM1 series incorporates integral inlet filter washers and check valves in both the hot and cold water inlets to protect against cross flow.
Features
Lead Free cast copper silicon alloy body construction
Solid wax hydraulic principle thermostat assures dependable mixing of hot and cold water
Thermostat controls both hot and cold water
Available union connection models include threaded (-UT), solder (-US), PEX (-PEX), PEX F1960 cold expansion fittings (-CEF), CPVC (-CPVC), Quick-Connect (-QC), or w/press
Adjustment cap with locking feature
Integral filter washers and check valves
Qty:
Part #:130-5419-027
- Press Fit Fittings - Coupling - Press x Press - No-Lead - CTS x CTS
Qty:
Qty:
Part #:422074
- 72230 3/4 TEE-NL
Part Type
Tee
Series
72230
Inlet Connection
FNPT
Outlet Connection
FNPT
Inlet Connection Size
3/4
Outlet Connection Size
3/4
Product Line
Plumbing
Product Class
156
CommercialCategory
Threaded Fittings
CommercialSubCategory
NL Brass
CommercialStyle
Tee FNPT x FNPT x FNPT
Qty:
Part #:284-PP901A1004
- Pressure Reducing Valve HONPP901A1004 Pressure Reducing Valve Single Pressure System
Pressure Reducing Valve
Type Pilot Operated
Actuation Type Diaphragm
Nominal Size 1/4 Inch
End Connection Female Threaded x Female Threaded
End to End Distance 8-7/8 Inch
Pressure Rating 0 to 25 PSI (Outlet), 45 to 150 PSI (Inlet)
Inclusions/Features Safety Relief Valve, Gage Tapping to Measure the Regulated Pressure
Application Pneumatic Control System
Overall Dimension 3-3/4 Inch Depth x 11 Inch Height
Mounting Type Bracket Furnished
PP901 pneumatic valve controls the pressure of the air delivered to pneumatic control systems. Models available for single-pressure systems or two-pressure systems (Day/Night or Summer/Winter) requiring two independently regulated pressure settings.
Qty:
Part #:284-PP901B1002
- Pressure Reducing Valve HONPP901B1002 Pressure Reducing Valve Two Pres. System 0-25 PSI Adjustable
Pressure Reducing Valve
Type Pilot Operated
Actuation Type Diaphragm
Nominal Size 1/4 Inch
End Connection Female Threaded x Female Threaded
End to End Distance 8-7/8 Inch
Pressure Rating 0 to 5 PSI (Outlet), 45 to 150 PSI (Inlet)
Inclusions/Features Safety Relief Valve, Gage Tapping to Measure the Regulated Pressure
Application Pneumatic Control System
Overall Dimension 3-3/4 Inch Depth x 11 Inch Height
Mounting Type Bracket Furnished
PP901 pneumatic valve controls the pressure of the air delivered to pneumatic control systems. Models available for single-pressure systems or two-pressure systems (Day/Night or Summer/Winter) requiring two independently regulated pressure settings.
Qty:
Part #:284-335
- TAC335 3/4" Bronze Pressure Reducing Valve With Fast Fill Feature Set @ 12 PSI 10-25 Adj
Part Description
Pressure Reducing Valve
Type Built-In Check
Actuation Type Adjustable Screw
Nominal Size 3/4 Inch
End Connection Female Threaded x Female Threaded
End to End Distance 3-3/4 Inch
Body Material Brass
Standard Factory Setting 12 PSI
Temperature Rating 212 Deg F
Pressure Rating 100 PSI
Exclusions Exclusive Fast Fill Lever Lock
Application Boiler
Applicable Standard ASSE 1012, CSA B64.3 -11
Pressure Setting Rating 10 to 25 PSI
$
135.18
Qty:
Displaying: 1 - 24 of 25 Matching Items