1-1/4"
Hand and Power Tools


Displaying: 1 - 24 of 56 Matching Items
56 Items
View:
Active Filters :
Part #:504351
Hex End L-Wrenches - ProGuard&trade Finish Chamfered tool tips eliminate burrs and help tools seat in screw head Sharp corners transfer more torque to the screw and reduce stripping Precision machined for ease of use and superior fit
$ 19.69
Qty:
add to cart
Part #:511751
Replacement for Discontinued Stanley 1-1/4in Satin Finish Standard Combination Wrench 86-846
$21.72 MSRP $ 19.20
Qty:
add to cart
Part #:503695
1-1/4" Shank Diameter Eyebolts Plain Pattern Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage Each lot is tested and inspected to insure conformance to specifications Available with UNC Class 2A thread only Plain pattern eyebolts must never be used to lift an angular load Eyebolt shanks should never be undercut or eyebolt shank diameters reduced To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
$75.45 MSRP $ 49.23
Qty:
add to cart
Part #:500375
9/16" 12-Point SAE SUPERCOMBO&reg Combination Wrench &bull SUPERCOMBO&reg open end has specially designed grooves that direct wrench force away from fastener corners &bull SUPERTORQUE&reg box opening design allows application of higher torque without rounding or deforming hex fastener points. No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points &bull Meets or exceeds AErospace specification AS 954 for 12 point fasteners (as defined by AS 870) to provide accurate torque/tension relationship for precision application &bull May be used on all common hex (6 point) fasteners with considerable advantage over conventional box end wrenches to increase both hand tool flexibility and economy &bull Box and open end openings are identical
$27.60 MSRP $ 18.01
Qty:
add to cart
Part #:503701
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage Each lot is tested and inspected to insure conformance to specifications Available with UNC Class 2A thread only Eyebolt shanks should never be undercut or eyebolt shank diameters reduced Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially. A steel washer or spacer may be required for proper seating To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
$9.40 MSRP $ 6.13
Qty:
add to cart
Part #:503456
9/16" Shank Diameter Eyebolts Shoulder Pattern Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage Each lot is tested and inspected to insure conformance to specifications Available with UNC Class 2A thread only Eyebolt shanks should never be undercut or eyebolt shank diameters reduced Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially. A steel washer or spacer may be required for proper seating To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
$13.80 MSRP $ 9.00
Qty:
add to cart
Part #:507925
1/4" Drive 6-Point SAE 7/16" Deep Socket SUPERTORQUE lobular openings for greater turning power without deforming the fastener Designed for maximum engagement on 6 point fasteners
$13.80 MSRP $ 9.00
Qty:
add to cart
Part #:811597
3/8" Drive 6-Point SAE 9/16" Deep Socket SUPERTORQUE lobular openings for greater turning power without deforming the fastener Designed for maximum engagement on 6-point fasteners
$13.50 MSRP $ 8.82
Qty:
add to cart
Part #:503805
1/2" Drive 6-Point SAE 1-1/4" Shallow Socket SUPERTORQUE lobular openings for greater turning power without deforming the fastener Designed for maximum engagement on 6 point fasteners
$26.10 MSRP $ 17.04
Qty:
add to cart
Part #:507857
3/4" Drive SAE 1-1/4" Impact Shallow Socket SUPERTORQUE lobular openings for greater turning power without deforming the fastener Designed for maximum engagement on 6 point fasteners Suitable for use with pneumatic and electric impact wrenches Specially heat treated for impact use to provide long life, safety, and durability
$37.75 MSRP $ 24.64
Qty:
add to cart
Part #:811645
1/2" Drive 6-Point SAE 7/16" Shallow Socket SUPERTORQUE lobular openings for greater turning power without deforming the fastener Designed for maximum engagement on 6 point fasteners
$12.25 MSRP $ 7.99
Qty:
add to cart
Part #:500373
7/16" 12-Point SAE SUPERCOMBO&reg Combination Wrench &bull SUPERCOMBO&reg open end has specially designed grooves that direct wrench force away from fastener corners &bull SUPERTORQUE&reg box opening design allows application of higher torque without rounding or deforming hex fastener points. No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points &bull Meets or exceeds AErospace specification AS 954 for 12 point fasteners (as defined by AS 870) to provide accurate torque/tension relationship for precision application &bull May be used on all common hex (6 point) fasteners with considerable advantage over conventional box end wrenches to increase both hand tool flexibility and economy &bull Box and open end openings are identical
$23.55 MSRP $ 15.37
Qty:
add to cart
Part #:500385
1-1/4" 12-Point SAE SUPERCOMBO&reg Combination Wrench &bull SUPERCOMBO&reg open end has specially designed grooves that direct wrench force away from fastener corners &bull SUPERTORQUE&reg box opening design allows application of higher torque without rounding or deforming hex fastener points. No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points &bull Meets or exceeds AErospace specification AS 954 for 12 point fasteners (as defined by AS 870) to provide accurate torque/tension relationship for precision application &bull May be used on all common hex (6 point) fasteners with considerable advantage over conventional box end wrenches to increase both hand tool flexibility and economy &bull Box and open end openings are identical
$101.80 MSRP $ 66.42
Qty:
add to cart
Part #:504821
Hex End L-Wrenches - ProGuard&trade Finish Chamfered tool tips eliminate burrs and help tools seat in screw head Sharp corners transfer more torque to the screw and reduce stripping Precision machined for ease of use and superior fit
$4.79 MSRP $ 4.04
Qty:
add to cart
Part #:504823
Hex End L-Wrenches - ProGuard&trade Finish Chamfered tool tips eliminate burrs and help tools seat in screw head Sharp corners transfer more torque to the screw and reduce stripping Precision machined for ease of use and superior fit
$7.74 MSRP $ 6.52
Qty:
add to cart
Part #:504840
Hex End L-Wrenches - ProGuard&trade Finish Chamfered tool tips eliminate burrs and help tools seat in screw head Sharp corners transfer more torque to the screw and reduce stripping Precision machined for ease of use and superior fit
$7.36 MSRP $ 6.20
Qty:
add to cart
Part #:500447
1/2" Drive 12-Point SAE 7/16" Shallow Socket &bull SUPERTORQUE&reg lobular openings for greater turning power without deforming the fastener &bull Designed for quick engagement on both 6 and 12 point fasteners
$12.25 MSRP $ 7.99
Qty:
add to cart
Part #:501121
7/16" 12-Point SAE SUPERCOMBO&reg Black Industrial Finish Combination Wrench &bull SUPERCOMBO&reg open end has specially designed grooves that direct wrench force away from fastener corners &bull SUPERTORQUE&reg box opening design allows application of higher torque without rounding or deforming hex fastener points. No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points &bull Meets or exceeds AErospace specification AS 954 for 12 point fasteners (as defined by AS 870) to provide accurate torque/tension relationship for precision application &bull May be used on all common hex (6 point) fasteners with considerable advantage over conventional box end wrenches to increase both hand tool flexibility and economy &bull Box and open end openings are identical
$20.20 MSRP $ 13.18
Qty:
add to cart
Part #:800221
7/16" Drive 12-Point SAE 11/32" Shallow Socket &bull SUPERTORQUE&reg lobular openings for greater turning power without deforming the fastener &bull Designed for quick engagement on both 6 and 12 point fasteners
$9.90 MSRP $ 6.47
Qty:
add to cart
Part #:811605
3/8" Drive 12-Point SAE 7/16" Deep Socket All tools are professional quality, made of high-grade chrome vanadium steel Sockets feature SUPERTORQUE lobular openings for greater turning power without deforming the fastener Metal tool box made for years of rugged use
$12.85 MSRP $ 8.38
Qty:
add to cart
Part #:812797
1/4" Drive 12-Point SAE 7/16" Shallow Socket &bull SUPERTORQUE&reg lobular openings for greater turning power without deforming the fastener &bull Designed for quick engagement on both 6 and 12 point fasteners
$9.55 MSRP $ 6.24
Qty:
add to cart
Part #:500442
3/8" Drive 12-Point SAE 9/16" Shallow Socket &bull All tools are professional quality, made of high-grade chrome vanadium steel &bull Sockets feature SUPERTORQUE&reg lobular openings for greater turning power without deforming the fastener &bull Metal tool box made for years of rugged use
$10.55 MSRP $ 6.89
Qty:
add to cart
Part #:501123
9/16" 12-Point SAE SUPERCOMBO&reg Black Industrial Finish Combination Wrench &bull SUPERCOMBO&reg open end has specially designed grooves that direct wrench force away from fastener corners &bull SUPERTORQUE&reg box opening design allows application of higher torque without rounding or deforming hex fastener points. No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points &bull Meets or exceeds AErospace specification AS 954 for 12 point fasteners (as defined by AS 870) to provide accurate torque/tension relationship for precision application &bull May be used on all common hex (6 point) fasteners with considerable advantage over conventional box end wrenches to increase both hand tool flexibility and economy &bull Box and open end openings are identical
$23.80 MSRP $ 15.53
Qty:
add to cart
Part #:507924
1/4" Drive 12-Point SAE 9/16" Shallow Socket &bull SUPERTORQUE&reg lobular openings for greater turning power without deforming the fastener &bull Designed for quick engagement on both 6 and 12 point fasteners
$9.65 MSRP $ 6.29
Qty:
add to cart
 
Displaying: 1 - 24 of 56 Matching Items