3/16"
Hand and Power Tools


Displaying: 1 - 24 of 38 Matching Items
38 Items
View:
Active Filters :
Part #:504832
Hex End L-Wrenches - ProGuard&trade Finish Chamfered tool tips eliminate burrs and help tools seat in screw head Sharp corners transfer more torque to the screw and reduce stripping Precision machined for ease of use and superior fit
$0.49 MSRP $ 0.39
Qty:
add to cart
Part #:503822
Hex End L-Wrenches - ProGuard&trade Finish Chamfered tool tips eliminate burrs and help tools seat in screw head Sharp corners transfer more torque to the screw and reduce stripping Precision machined for ease of use and superior fit
$32.83 MSRP $ 27.67
Qty:
add to cart
Part #:510575
Country of Origin USA:
$24.80 MSRP $ 16.50
Qty:
add to cart
Part #:500380
7/8" 12-Point SAE SUPERCOMBO&reg Combination Wrench &bull SUPERCOMBO&reg open end has specially designed grooves that direct wrench force away from fastener corners &bull SUPERTORQUE&reg box opening design allows application of higher torque without rounding or deforming hex fastener points. No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points &bull Meets or exceeds AErospace specification AS 954 for 12 point fasteners (as defined by AS 870) to provide accurate torque/tension relationship for precision application &bull May be used on all common hex (6 point) fasteners with considerable advantage over conventional box end wrenches to increase both hand tool flexibility and economy &bull Box and open end openings are identical
$47.15 MSRP $ 30.77
Qty:
add to cart
Part #:810310
10" Long Taper Punches Designed for aligning the holes in metal pieces through which rivets, bolts, or screws will be inserted Not intended for driving pins as punch may become stuck in work Also called line-up aligning or drift punches
$22.60 MSRP $ 14.75
Qty:
add to cart
Part #:810247
7 1/2" Cold Chisels The most commonly used chisels in the chisel line For cutting, shaping and removing metal softer than the cutting edge of the chisel
$29.60 MSRP $ 19.31
Qty:
add to cart
Part #:500171
3/8" Drive Standard Length Hex Bit Sockets, SAE, High-Polioshed Chrome Finish &bull All tools are professional quality, made of high-grade chrome vanadium steel &bull Sockets feature SUPERTORQUE&reg lobular openings for greater turning power without deforming the fastener &bull Metal tool box made for years of rugged use
$16.85 MSRP $ 10.99
Qty:
add to cart
Part #:810380
1/2" Drive 6-Point SAE 7/8" Shallow Socket SUPERTORQUE lobular openings for greater turning power without deforming the fastener Designed for maximum engagement on 6 point fasteners
$16.10 MSRP $ 10.51
Qty:
add to cart
Part #:811914
3/8" Drive 6-Point SAE 7/8" Shallow Socket &bull SUPERTORQUE&reg lobular openings for greater turning power without deforming the fastener &bull Designed for maximum engagement on 6 point fasteners
$12.25 MSRP $ 7.99
Qty:
add to cart
Part #:503820
Hex End L-Wrenches - ProGuard&trade Finish Chamfered tool tips eliminate burrs and help tools seat in screw head Sharp corners transfer more torque to the screw and reduce stripping Precision machined for ease of use and superior fit
$21.41 MSRP $ 18.04
Qty:
add to cart
Part #:802782
Steel Letter Stamp Sets &bull Letter sets contain 27 pieces A thru Z plusampersand (&amp)&bull Tempered shanks for extra safety
$80.00 MSRP $ 68.80
Qty:
add to cart
Part #:802783
Steel Number Stamp Sets &bull Number sets contain 9 pieces 0 thru 9(the 6 is used as a 9)&bull Crowned striking surface ensures full forceto the center of the stamp &amp textured shankprovides firm easy grip
$25.00 MSRP $ 21.50
Qty:
add to cart
closeout
Part #:511852
CLOSEOUTS Only 12 Left!
7/8" Wire Rope Clip, Forged Carbon Steel, Galvanized(Discontinued being replaced by 490-M253) Base is Drop-Forged Carbon Steel Hot Galvanized to ASTM A-153 to Resist Rust and Corrosion U-Bolts Are colored Blue for Identification Purposes and Use Heavy Duty Hex Nuts (UNC-2A) Designed to Meet Federal Specifications, FF-C-450, Type 1, Class 1 Designed to Meet or Exceed All Requirements of ASME B30.26 Including Identification, Ductility, Design Factor and Temperature Permanently Marked with Size and Manufacturer Sizes 1/4" and Above Marked with USA and Date Code Sizes 1/8" Through 1-1/4" Are Supplied Bagged and Unassembled Note See Application and Warning Information
$39.88 MSRP $ 36.30
Qty:
add to cart
Part #:500456
1/2" Drive 12-Point SAE 7/8" Shallow Socket &bull SUPERTORQUE&reg lobular openings for greater turning power without deforming the fastener &bull Designed for quick engagement on both 6 and 12 point fasteners
$16.10 MSRP $ 10.51
Qty:
add to cart
Part #:500046
1/2" Drive 6-Point SAE 7/8" Deep Socket &bull SUPERTORQUE&reg lobular openings for greater turning power without deforming the fastener &bull Designed for maximum engagement on 6 point fasteners
$25.50 MSRP $ 16.65
Qty:
add to cart
Part #:504814
Hex End L-Wrenches - ProGuard&trade Finish Chamfered tool tips eliminate burrs and help tools seat in screw head Sharp corners transfer more torque to the screw and reduce stripping Precision machined for ease of use and superior fit
$0.32 MSRP $ 0.27
Qty:
add to cart
Part #:500477
1/2" Drive 12-Point SAE 7/8" Deep Socket &bull SUPERTORQUE&reg lobular openings for greater turning power without deforming the fastener &bull Designed for quick engagement on both 6 and 12 point fasteners
$25.50 MSRP $ 16.65
Qty:
add to cart
Part #:500484
3/4" Drive Shallow Sockets, 12-Point, SAE, High Polished Chrome Finish &bull SUPERTORQUE&reg lobular openings for greater turning power without deforming the fastener &bull Designed for quick engagement on both 6 and 12 point fasteners
$31.35 MSRP $ 20.46
Qty:
add to cart
Part #:501162
7/8" 12-Point SAE SUPERCOMBO&reg Black Industrial Finish Combination Wrench &bull SUPERCOMBO&reg open end has specially designed grooves that direct wrench force away from fastener corners &bull SUPERTORQUE&reg box opening design allows application of higher torque without rounding or deforming hex fastener points. No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points &bull Meets or exceeds AErospace specification AS 954 for 12 point fasteners (as defined by AS 870) to provide accurate torque/tension relationship for precision application &bull May be used on all common hex (6 point) fasteners with considerable advantage over conventional box end wrenches to increase both hand tool flexibility and economy &bull Box and open end openings are identical
$40.10 MSRP $ 26.17
Qty:
add to cart
Part #:812883
7/8" Drive 12-Point SAE 11/32" Shallow Socket &bull SUPERTORQUE&reg lobular openings for greater turning power without deforming the fastener &bull Designed for quick engagement on both 6 and 12 point fasteners
$12.25 MSRP $ 7.99
Qty:
add to cart
Part #:507844
1/2" Drive SAE 7/8" Impact Deep Socket SUPERTORQUE lobular openings for greater turning power without deforming the fastener Designed for maximum engagement on 6 point fasteners Suitable for use with pneumatic and electric impact wrenches Specially heat treated for impact use to provide long life, safety, and durability
$24.30 MSRP $ 15.86
Qty:
add to cart
Part #:810276
5" Solid Punches 3/16" For loosening frozen or tight pins and keys or knocking out rivets Also called starter punches because they are ideal for loosening frozen pins
$13.70 MSRP $ 8.95
Qty:
add to cart
Part #:811375
5/8 X 11/16 12 Point SAE Double Head Ratcheting Box Wrench Allows fast removal of fasteners with a ratcheting action at each end Ideal for long bolt-through applications Flat handle allows access to tight clearance areas Turn wrench over to change direction
$41.70 MSRP $ 27.22
Qty:
add to cart
Part #:503705
7/8" Shank Diameter Eyebolts Shoulder Pattern Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage Each lot is tested and inspected to insure conformance to specifications Available with UNC Class 2A thread only Eyebolt shanks should never be undercut or eyebolt shank diameters reduced Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially. A steel washer or spacer may be required for proper seating To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
$29.60 MSRP $ 19.31
Qty:
add to cart
 
Displaying: 1 - 24 of 38 Matching Items