Polycarbonate
Leather
View:
Active Filters :
- Material: Leather Polycarbonate
Part #:503802
-
PIP® Superior Grade Split Cowhide Leather Welder's Glove with Cotton/Foam Lining and DuPont&trade Kevlar® Stitching
Side Split Cowhide leather construction provides comfort, durability, excellent abrasion resistance, and breathability
Side Split leather is durable and provides excellent protection due to its dense fibers
Fully welted to protect seams from abrasions
Stitched with Kevlar® adding strength and burn resistance
Cotton/foam lining gives welders additional heat protection but still absorbs moisture
One-piece back for extended glove life
Wing thumb increases comfort in open-handed work
Double reinforced palm and thumb strap increases durability and provides added protection at common wear points
Part #:510422
- Polycarbonate Fog Nozzle with Bumper Attributes
Maximum Operating Pressure
100 PSI (water only) at 70°F (21°C)
Weight
0.54 lb
Size
1-1/2"
Material
Polycarbonate
Thread
NPSH
Flow
90° Spray GPM at 100 PSI= 83.6
$
35.19
Qty:
Part #:334-FNB150NST
- Polycarbonate Fog Nozzle with Bumper Attributes
Maximum Operating Pressure
100 PSI (water only) at 70°F (21°C)
Weight
0.6 lb
Size
1-1/2"
Material
Polycarbonate
Thread
NST (NH)
Flow
90° Spray GPM at 100 PSI= 83.6
$
35.19
Qty:
$
93.89
Qty:
Part #:307241
- NightFox&trade Stem Mount Electronic Photocontrol, 120-277 V
NightFox&trade electronic photocontrols permanently install on outdoor electrical boxes or outdoor lighting fixtures. Ideal for LED fixtures with long-life expectations. ½&rdquo-14 NPSM threaded stem fits standard outlet boxes and wall packs with a minimum installation hole size of 7/8&rdquo diameter. Come with 9" wire leads.
$
22.40
Qty:
Part #:309735
- NightFox&trade Stem and Swivel Mount Electronic Photocontrol, 120-277 V
NightFox&trade electronic photocontrols permanently install on outdoor electrical boxes or outdoor lighting fixtures. Ideal for LED fixtures with long-life expectations. ½&rdquo-14 NPSM threaded stem fits standard outlet boxes and wall packs with a minimum installation hole size of 7/8&rdquo diameter. Come with 9" wire leads.
$
24.48
Qty:
$
83.38
Qty:
Part #:312425
- Stem Mount Thermal Photocontrol, 208-277 V
These photocontrols install on standard outdoor light fixtures and electrical boxes with 1&frasl2"-14 NPSM thread or 7&frasl8" knock-out holes for dusk-to-dawn ON/OFF control of outdoor lighting.
$
28.45
Qty:
Part #:308971
- NightFox&trade Button Electronic Photocontrol, 120-277 V
NightFox&trade electronic photocontrols permanently install on outdoor electrical boxes, in-wall boxes or outdoor lighting fixtures. Ideal for LED fixtures with long-life expectations. Mounts internally to an enclosure with a minimum installation hole size of 5/8&rdquo diameter. Comes with 9" wire leads.
$
21.59
Qty:
Part #:308196
- NightFox&trade Wall Mount Electronic Photocontrol, 120-277 V
NightFox&trade electronic photocontrols permanently install on standard single-gang in-wall boxes. Standard wall plate included. Ideal for LED fixtures with long-life expectations.
$
25.76
Qty:
Part #:334-PS732
- Watts FRLs Polycarbonate Bowl with Twist Drain
Attributes
Weight
0.8 lb
Optional Package/Box Quantity
1
Material
Polycarbonate
Used on
F602-02, F602-03, F602-04
$
89.32
Qty:
Part #:566-K4141C
- Stem Mount Thermal Photocontrol, 120 V, 25 A
These photocontrols install on standard outdoor light fixtures and electrical boxes with 1&frasl2"-14 NPSM thread or 7&frasl8" knock-out holes for dusk-to-dawn ON/OFF control of outdoor lighting.
$
33.82
Qty:
Part #:539-35-969
- Tuff-Tote&trade Tool Carrier, Premium Leather w/Strap
The Tuff-Tote® Tool Carrier comes with 4 center screwdriver slots, 2 interior compartments, 2 divided outside pockets, and 4 outside tool loops. Its unique stand-alone design keeps tools standing upright for easy identification and access. Tool carrier comes with removable should strap to help relieve lower back strain. It also has rust-resistant, plated-steel hardware and heavy, lock-stitched nylon thread for long term-durability, in addition to an oil and moisture-resistant reinforced bottom.
Lifetime warranty
$
292.78
Qty:
Part #:829-RWP262W
- radiant® Two-Gang Screwless Wall Plate White
Adds a touch of sophistication to any space with a sleek, screwless face and low-profile. Sized to fit even over ragged openings for a seamless look.
Designed to exclusively fit the designer switches, dimmers and outlets from the radiant® Collection, snapping into place with ease.
Ensures proper plate positioning with subplate screws.
Molded of highly durable polycarbonate, Wall Plates from the radiant® Collection are available in an array of classic colors and metallic finishes.
Qty:
Part #:829-RWP263W
- radiant® Three-Gang Screwless Wall Plate
Adds a touch of sophistication to any space with a sleek, screwless face and low-profile. Sized to fit even over ragged openings for a seamless look.
Designed to exclusively fit the designer switches, dimmers and outlets from the radiant® Collection, snapping into place with ease.
Ensures proper plate positioning with subplate screws.
Molded of highly durable polycarbonate, Wall Plates from the radiant® Collection are available in an array of classic colors and metallic finishes.
Qty:
Part #:829-RWP264W
- radiant® Four-Gang Screwless Wall Plate, White
Adds a touch of sophistication to any space with a sleek, screwless face and low-profile. Sized to fit even over ragged openings for a seamless look.
Designed to exclusively fit the designer switches, dimmers and outlets from the radiant® Collection, snapping into place with ease.
Ensures proper plate positioning with subplate screws.
Molded of highly durable polycarbonate, Wall Plates from the radiant® Collection are available in an array of classic colors and metallic finishes.
Qty:
Part #:829-RWP26W
- radiant® One-Gang Screwless Wall Plate
Adds a touch of sophistication to any space with a sleek, screwless face and low-profile. Sized to fit even over ragged openings for a seamless look.
Designed to exclusively fit the designer switches, dimmers and outlets from the radiant® Collection, snapping into place with ease.
Ensures proper plate positioning with subplate screws.
Molded of highly durable polycarbonate, Wall Plates from the radiant® Collection are available in an array of classic colors and metallic finishes.
Qty:
Part #:334-FNB100NST
- Polycarbonate Fog Nozzle with Bumper
Attributes
Maximum Operating Pressure
100 PSI (water only) at 70°F (21°C)
Weight
0.44 lb
Break Quantity
0
Optional Package/Box Quantity
24
Size
1"
Material
Polycarbonate
Thread
NST (NH)
Flow
90° Spray GPM at 100 PSI= 11.4
$
37.65
Qty:
Part #:566-K4021C
- Button Thermal Photocontrol, 120 V
These photocontrols install within lighting fixtures, post lamps, or in-wall boxes to provide dusk-to-dawn ON/OFF control of outdoor lighting.
$
13.82
Qty:
Part #:566-K4221C
- Stem and Swivel Mount Thermal Photocontrol, 120 V
These photocontrols are provided with a swivel arm for easy and flexible installation to standard outdoor light fixtures or electrical boxes.
$
26.20
Qty:
Part #:566-EK4736S
- NightFox&trade Top Lens Stem and Swivel Mount Electronic Photocontrol, 120-277 V
NightFox&trade electronic photocontrols permanently install on outdoor electrical boxes or outdoor lighting fixtures. Ideal for LED fixtures with long-life expectations. ½&rdquo-14 NPSM threaded stem fits standard outlet boxes and wall packs with a minimum installation hole size of 7/8&rdquo diameter. Come with 9" wire leads.
$
24.48
Qty:
Part #:334-FNPSO150S-70
- Catalog Pg 792. Package Qty Only N:
$
273.91
Qty:
Displaying: 1 - 22 of 22 Matching Items