3/4in
Safety and Welding Products
View:
Active Filters :
- Main Category: Safety and Welding Products
- Size: 3/4in Large
Part #:511851
-
3/4" Wire Rope Clip, Forged Carbon Steel, Galvanized
Base is Drop-Forged Carbon Steel
Hot Galvanized to ASTM A-153 to Resist Rust and Corrosion
U-Bolts Are colored Blue for Identification Purposes and Use Heavy Duty Hex Nuts (UNC-2A)
Designed to Meet Federal Specifications, FF-C-450, Type 1, Class 1
Designed to Meet or Exceed All Requirements of ASME B30.26 Including Identification, Ductility, Design Factor and Temperature
Permanently Marked with Size and Manufacturer
Sizes 1/4" and Above Marked with USA and Date Code
Sizes 1/8" Through 1-1/4" Are Supplied Bagged and Unassembled
Note See Application and Warning Information
Qty:
Part #:511897
-
3/4" Anchor Shackle, Screw Pin, Forged Carbon Steel, Painted Blue
Shackle Bodies Are Drop-Forged Carbon Steel
Self Colored (Painted Blue)
C-419-S Shackles Meet the Design Requirements of Federal Specification RR-C-271, Type IVA, Grade A, Class 2
Working Load Limit, Size, Manufacture Name, Date Code and USA Permanently Marked on Each Shackle
Statistically Tested for Impact Resistance, Tensile Strength, Hardness, Ductility and Fatigue
419 Series Shackles Meet or Exceed All Manufacturing Requirements of the ASME B30.26 &rdquoRigging Hardware&rdquo. These Include the Material Ductility Requirement (Section 26-1.1.2), the Design Factor Requirement (Section 26.1.2), the Identification Requirement (Section 26-1.5.1), and the Effective Temperature Range (Section 26-1.6.1). the Shackles Can Be Proof Tested in Accordance with Section 26-1.4
Certification Available Upon Request
6 to 1 Design Factor
Pins and Bolts Are Heat-Treated and Made of Alloy Steel
Qty:
Part #:810251
- Country of Origin MX:
$
44.23
Qty:
Part #:810200
- Country of Origin MX:
$
40.85
Qty:
Part #:810167
- Country of Origin MX:
$
50.23
Qty:
closeout
Part #:509771
- Availability: Will be backordered (Typically arrives in 3 days)
- Country of Origin MX:
$
114.98
Qty:
Part #:810197
- Country of Origin MX:
$
44.23
Qty:
Part #:511923
-
Universal Replacement Latch Kit, For Hook Sizes 2-22 (1/4")
Always Inspect the Hook and Latch Before Using
Always Make Sure the Spring Forces the Latch Against the Point of Hook
Check the Load Before Lifting to Make Sure the Hook (Not the Latch) is Supporting Load
To Assemble Latch on Hook, Follow Instructions Supplied with Latch Kit
Clapper Latches Are Zinc Plated
Spring Spacer Adapts Latch to Hooks with Narrow Cam
Bolt and Nut Permit Fast, Easy Installation
Note Latches Listed on This Page Cannot Be Used on Campbell'S Current Design of Integrated Sling and Hoist Hooks.
Please Refer to the Appropriate Catalog Pages for These Hooks for Proper Replacement Latch Kits.
Qty:
Part #:501013
- Lightweight Fall-Arrest Harness, Large
&bull Designed to arrest free falls and distribute impact forces over thighs, pelvis, chest and shoulders as required by OSHA&bull For workers who also need positioning in addition to fall arrest, this harness allows insertion of an existing positioning belt through 5-Inch (127 mm) backstrap loops on the harness&bull Easily adjusts for proper fit and function&bull Waist strap has friction-style buckle for adjustments over a continuous range of sizes&bull Friction slide adjusters hold shoulder straps in place so the user does not need to readjust for each use&bull Seat strap adds extra comfort and support&bull Tongue buckles with grommeted leg straps provide comfortable fit over a range of sizes&bull Drop-forged circle D-ring has corrosion-resistant finish, wear-minimizing roller and is proof-loaded to meet OSHA regulations&bull Identity and warning tags and/or labels are reminders of proper application and inspection procedures. The Klein name, model, date of manufacture and OPE-system application symbol(s) are permanently and clearly inscribed on these tags and labels&bull Certified and compliant with ANSI and CSA requirements&bull Durable 1-3/4'' (44 mm) Type 13, or equivalent, nylon webbing harness construction
Qty:
Brady BMP21 Plus Series All-Weather Vinyl Labels M21-750-595-RD 3/4in x 21ft White on Red 262-142801
- Country of Origin MX:
$
44.23
Qty:
Part #:511960
-
3/4" x 6" Jaw & Jaw Turnbuckle, Forged Carbon Steel, Galvanized
Drop-Forged Carbon Steel
Galvanized to Meet ASTM A-153 Specifications
5 to 1 Design Factor
Meets Design Requirements of ASTM F1145, Type 1, Grade 1, Class G
Jaws on Sizes 1/4&rdquo Through 5/8&rdquo Have Hex Head Bolt and Nut
Jaws on Sizes 3/4&rdquo Through 1-1/2&rdquo Have Cotter Key and Bolt
IMPORTANT Instructions For Use
Turnbuckles are Designed for a Static Load
In Loads Where There is Vibration, Lock Nuts (Jam Nuts) Should be Used to Prevent the Connection from Turning or Loosening
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:511961
-
3/4" x 9" Jaw & Jaw Turnbuckle, Forged Carbon Steel, Galvanized
Drop-Forged Carbon Steel
Galvanized to Meet ASTM A-153 Specifications
5 to 1 Design Factor
Meets Design Requirements of ASTM F1145, Type 1, Grade 1, Class G
Jaws on Sizes 1/4&rdquo Through 5/8&rdquo Have Hex Head Bolt and Nut
Jaws on Sizes 3/4&rdquo Through 1-1/2&rdquo Have Cotter Key and Bolt
IMPORTANT Instructions For Use
Turnbuckles are Designed for a Static Load
In Loads Where There is Vibration, Lock Nuts (Jam Nuts) Should be Used to Prevent the Connection from Turning or Loosening
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:511877
-
3/4" Connecting Link, Forged Carbon Steel, Galvanized, 5 Pcs per Box
Drop-Forged Heat-Treated Carbon or Alloy Steel
Standard Finish is Self-Colored or Galvanized to Meet ASTM A-153 Specifications
4 to 1 Design Factor
For Proper Closure, Peen the Prongs to Fill the Hole of the Mating Half as Much as Possible
Meets Design Requirements of Federal Specification RR-C-271D, Type II
Make Sure the Connecting Link Used is the Same Size as the Components Being Joined. e.g., a 3/8 in. Connecting Link is Used with 3/8 in. Chain
Any Assembly Made Using Connecting Links Should be Rated at the Working Load Limit of the Weakest Component.
The Working Load Limit of Connecting Links is Based on a Straight Line Pull. Any Side or Shock Loading Will Significantly Reduce the Actual Working Load Limit.
NEVER Re-Use a Connecting Link
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:511945
-
3/4" Heavy Wire Rope Thimble, Galvanized
Standard Material Hot Rolled, Mild Steel
Galvanized
Imported
A Thimble is a Wear Pad That Protects the Rope From Cuts, Kinking and Abrasions. Always Use An Appropriate Thimble When Making An Eye in a Rope.
When it is Necessary to Open a Thimble to Insert a Fitting, Make Sure the Points are Properly Aligned When the Thimble is Closed. Inspect Carefully for Cracks.
Thimbles ARE NOT Designed for Load Carrying Purposes Therefore Working Load Limits Have Not Been Established.
Qty:
Part #:841-150-72224
- Details
SUPPORTS WRIST JOINT &ndash Stabilizes wrist to prevent overextension and reduce risk of injury
THUMB LOOP &ndash Enhances stability and fit while keeping strap in place
DURABLE COMFORT &ndash Woven polyester-nylon-latex elastic for stretchable comfort and long-lasting wear
ADJUSTABLE &ndash Secure hook & loop closure adjusts for desired support and fit
AMBIDEXTROUS DESIGN &ndash For comfortable wear on either wrist
WORKDAY TO WEEKEND &ndash Designed for workers, athletes or anyone needing additional support
INCLUDES ONE (1) WRIST SUPPORT
MACHINE WASHABLE
$
4.15
Qty:
Part #:841-150-12534
- Country of Origin PEOPLE'S REPUBLIC OF CHINA. HAZMAT Item NO. Special Order Item YES.:
$
52.02
Qty:
Part #:841-012-69-318-L
- Country of Origin MALAYSIA. HAZMAT Item NO. Special Order Item NO. State Restricted NO:
$
18.96
BOX
Qty:
Part #:920062
- Five layers of protection providing a high level of breathability and protection against dry particulates and water based light liquid sprays and splashes. Good for use in industrial manufacturing, paper industry, food processing and any heavy dust environment.
When extra protection is needed this attached hood and elastic wrist and ankles does the trick to keep dirt and debris out
Full length zipper front and exceptional strength for easy donning
ANSI Sized for a wide range of motion
Elastic waistband for improved fit
Serged seams
Latex Free
NFPA 99 compliant antistatic material
One time use product
$
3.85
Qty:
Part #:841-127-N9690HVL
- Country of Origin PAKISTAN. HAZMAT Item NO. Special Order Item YES.:
$
111.53
DZ
Qty:
Part #:514152
- The Radians SJ07-3ZDS Reversible Windbreaker with Zip-Off Sleeves is an all-purpose, 4-in-1, windbreaker provides superior, cross-seasonal comfort and weather protection. Reverses from dark, low-profile grey to bright, hi-vis yellow. The zippered sleeves allow the Class 3 hi-vis jacket with sleeves to easily convert to a Class 2 hi-vis vest without sleeves.
Removable, Zippered Sleeves - Converts Jacket to Vest
Heavy Duty #5 Zipper Closure
2" Silver Reflective Tape
Reflective 1/8" Piping along back insert, yoke seams & zipper
Hemmed Elastic Sleeves
Bottom Hem Adjusted by Bungee Cord & Toggles
Garment Passes AATCC35 Rain Test
2" Drop Tail Back
POCKETS (TWO-TONE GREY SIDE) 2 Zippered Lower Front Pockets, 1 Vertical Zippered Chest Pocket
POCKETS (HI-VIS SIDE) 1 Left Chest Radio Pocket with Flap
MATERIALS Hi-Vis Polyester Coated Outer, Two-Tone Grey Polyester Outer
Type R, Class 3 (Class 2), ANSI 107
$
49.62
Qty:
Displaying: 1 - 20 of 20 Matching Items