Accuform
Safety and Welding Products
View:
Active Filters :
- Main Category: Safety and Welding Products
- Brand: Accuform PIP
Part #:303050
- Lock out machinery and inform readers not to operate the related device.
Properly lock out equipment and machinery in the workplace or facility to ensure safety of all personnel
Traditional OSHA-style signs, tags and labels are the most widely recognized design format in the industry
Danger header indicates a hazardous situation that, if not avoided, will result in death or serious injury
Qty:
Part #:506505
- Floor Stripe&trade High Performance Message Marking Tapes Identify and call attention to hazards throughout your facility. Printed 1-mil polyester tapes have 1-mil gloss over-laminate. Acrylic adhesive backing provides high tack and bond to a variety of smooth and rough surfaces. Available 3" wide x 50-ft. roll. Tapes can be custom printed with your message, graphic, or logo. Contact us with part number PTP155.
Part #:806845
- Clearly mark an exit in your warehouse, office, or facility. Clearly marked exits can make evacuating in an emergency easier.
Material Details
Plastic with protected surface coating (see details above)
Impact resistant with slight flexibility
Service temperature range -90°F to 168°
Lightweight indoor/outdoor use
Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes
Recycle code 6
$
13.60
Qty:
Part #:521047
Qty:
Part #:1484-813-6100/L
- West Chester IRONCAT 6100 Coated Welding Gloves
Product DetailsFR silicone coating provides cut and heat protectionPremium tactile qualitiesPalm is dotted with breaks where the hand and fingers bendDot-free fingertips for ultimate feel of the wireGreat feel and comfort
$
24.96
Qty:
Part #:506257
- Holds tight onto circuit breaker for a secure and solid lockout to avoid hazards.
Easily applied by standard flathead screwdriver
Red octagon shape reinforces lockout status
Fits most 120/240 circuit breakers
Accommodates up to 9/32-inch diameter padlock shackles (sold separately)
Single pole 13/16-inch W x 3-inch L x 3/4-inch H
Qty:
Part #:5020-CXB631
- Block access to a confined space, while indicating a permit only entry.
Use the crossbucks to physically block the entryway of a confined space
Restrict access by posting permit only entry
Traditional OSHA-style signs, tags and labels are the most widely recognized design format in the industry
Danger header indicates a hazardous situation that, if not avoided, will result in death or serious injury
Selected Material Details
Manufactured with 50% Post-Consumer Recycled plastic and is recyclable &ndash code 2
Polyethylene plastic with matte surface
Impact resistant with slight flexibility
Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes
Service temperature range -90°F to 168°
Qty:
Part #:5020-FBW555
$
78.00
Qty:
Part #:5020-FBW555 30IN X 30IN
$
56.00
Qty:
Part #:5020-TRF1218
$
46.00
Qty:
$
11.85
Qty:
Part #:5020-PRC202RD
- Set up a barrier quickly and economically with plastic chain and stanchion posts.
Use these chain links to corral or direct pedestrian traffic
Also can be used to designate an area that should not be entered
Lightweight, yet remarkably strong, polyethylene plastic
Available in solid colors and alternating color chain that changes color every two feet
Chain can be cut to your required length (maximum continuous length is 500 feet)
$
0.88
FT
Qty:
Part #:5020-FRMGT207CTP
Qty:
Part #:939111
- Size M ANSI Cut Level A4 Case Height 38.1 Case Length 53.4 Case Quantity 72 Case Quantity UOM PR Case Weight 15.04 Case Volume 82602.324000 Case Volume UOM cm3 Case Weight UOM kg Case Width UOM cm Category Hand Protection Color Brown Construction Cut-and-Sewn COO Pakistan Cuff Slip-on EN 388 3X22DX hide Top Grain Goatskin Cal Rating 43 PPE Level 4 Material Fleece lining Aramid packaging Pair Bagged Retail Ready palm Leather pim_style_id SID4187 Style KS9911KP resistancetype Cold ResistantWaterproofPuncture ResistantAbrasion ResistantCut ResistantArc Rated thumb type Keystone :
$
18.10
Qty:
Part #:920062
- Five layers of protection providing a high level of breathability and protection against dry particulates and water based light liquid sprays and splashes. Good for use in industrial manufacturing, paper industry, food processing and any heavy dust environment.
When extra protection is needed this attached hood and elastic wrist and ankles does the trick to keep dirt and debris out
Full length zipper front and exceptional strength for easy donning
ANSI Sized for a wide range of motion
Elastic waistband for improved fit
Serged seams
Latex Free
NFPA 99 compliant antistatic material
One time use product
$
3.85
Qty:
$
18.98
Qty:
$
3.45
Qty:
Part #:5020-TRM105CTP
$
14.13
PACK
Qty:
Part #:920063
- Five layers of protection providing a high level of breathability and protection against dry particulates and water based light liquid sprays and splashes. Good for use in industrial manufacturing, paper industry, food processing and any heavy dust environment.
When extra protection is needed this attached hood and elastic wrist and ankles does the trick to keep dirt and debris out
Full length zipper front and exceptional strength for easy donning
ANSI Sized for a wide range of motion
Elastic waistband for improved fit
Serged seams
Latex Free
NFPA 99 compliant antistatic material
One time use product
$
3.85
Qty:
Part #:920064
- Five layers of protection providing a high level of breathability and protection against dry particulates and water based light liquid sprays and splashes. Good for use in industrial manufacturing, paper industry, food processing and any heavy dust environment.
When extra protection is needed this attached hood and elastic wrist and ankles does the trick to keep dirt and debris out
Full length zipper front and exceptional strength for easy donning
ANSI Sized for a wide range of motion
Elastic waistband for improved fit
Serged seams
Latex Free
NFPA 99 compliant antistatic material
One time use product
$
4.08
Qty:
Displaying: 1 - 20 of 20 Matching Items