16in
2-7/16in
Part #:204566
Price is good for the quantity we have in stock. Prices could vary for ordered quantities for more than we have in stock.
- I.P.S. Pressure PVC Pipe conforms to ASTMD2241 for standard dimension ratios and is available in SDR 21 (200 psi) PVC compounds used in the extrusion of this pipe meet or exceed the requirements of ASTM D1784 cell class 12454. Gaskets conform to ASTM F477. Joint design is tested to the requirements of ASTM D3139.
2.375 OD
2.135 ID
.0113 Wall
$
2.20
Qty:
Part #:521321
- Technical Specifications
Pipe O.D. (inch) 1-1/2
Length (ft) 20
Color Blue
Length (m) 6
Pipe O.D. (mm) 40
Pipe Outside Diameter 1-1/2 inch, 40 mm
Length 20 ft, 6 m
Color Blue
Maximum Operating Pressure 232 psi, 15.9 bar
Minimum Operating Temperature -4 °F, -20 °C
Maximum Operating Temperature +115 °F, +46.1 °C
Weight 6.22 lb, 2.82 kg
Vacuum Pressure Rating 29.6 Inch-Hg
Materials of Construction Powder Coated Aluminum
Application Compressed Air, Vacuum, Industrial/Inert Gases
Specifications Met EN 755.2, EN 755.8, EN 573.3, ISO 9001, ASME B31.1 - 31.9, ISO 8573 (Air Quality), TUV Certification, CE Conformity, QUALICOAT
$
27.39
Qty:
Part #:700623
- DWV PVC (Drain, Waste, and Vent Polyvinyl Chloride) pipe. DWV pipe is similar to Schedule 40 PVC pipe in many ways but unlike Schedule 40 pipe, DWV pipe is not intended to contain any pressure. The drain, waste, and vent applications of DWV PVC pipe is limited to situations where the entire flow is generated by gravity, with no required pressure containment.
$
1.20
Qty:
Part #:700624
- DWV PVC (Drain, Waste, and Vent Polyvinyl Chloride) pipe. DWV pipe is similar to Schedule 40 PVC pipe in many ways but unlike Schedule 40 pipe, DWV pipe is not intended to contain any pressure. The drain, waste, and vent applications of DWV PVC pipe is limited to situations where the entire flow is generated by gravity, with no required pressure containment.
$
1.40
Qty:
Part #:700626
- DWV PVC (Drain, Waste, and Vent Polyvinyl Chloride) pipe. DWV pipe is similar to Schedule 40 PVC pipe in many ways but unlike Schedule 40 pipe, DWV pipe is not intended to contain any pressure. The drain, waste, and vent applications of DWV PVC pipe is limited to situations where the entire flow is generated by gravity, with no required pressure containment.
$
6.60
Qty:
Qty:
Qty:
Part #:503696
- 1/4" Shank Diameter Eyebolts Shoulder Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially. A steel washer or spacer may be required for proper seating
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
Qty:
Part #:521322
- Technical Specifications
Color Blue
Length (ft) 20
Pipe O.D. (mm) 25
Length (m) 6
Pipe O.D. (inch) 1
Pipe Outside Diameter 1 inch, 25 mm
Length 20 ft, 6 m
Color Blue
Maximum Operating Pressure 232 psi, 15.9 bar
Minimum Operating Temperature -4 °F, -20 °C
Maximum Operating Temperature +115 °F, +46.1 °C
Weight 4.24 lb, 1.92 kg
Vacuum Pressure Rating 29.6 Inch-Hg
Materials of Construction Powder Coated Aluminum
Application Compressed Air, Vacuum, Industrial/Inert Gases
Specifications Met EN 755.2, EN 755.8, EN 573.3, ISO 9001, ASME B31.1 - 31.9, ISO 8573 (Air Quality), TUV Certification, CE Conformity, QUALICOAT
$
14.95
Qty:
Part #:700625
- DWV PVC (Drain, Waste, and Vent Polyvinyl Chloride) pipe. DWV pipe is similar to Schedule 40 PVC pipe in many ways but unlike Schedule 40 pipe, DWV pipe is not intended to contain any pressure. The drain, waste, and vent applications of DWV PVC pipe is limited to situations where the entire flow is generated by gravity, with no required pressure containment.
$
3.80
Qty:
Part #:709811
- DWV PVC (Drain, Waste, and Vent Polyvinyl Chloride) pipe. DWV pipe is similar to Schedule 40 PVC pipe in many ways but unlike Schedule 40 pipe, DWV pipe is not intended to contain any pressure. The drain, waste, and vent applications of DWV PVC pipe is limited to situations where the entire flow is generated by gravity, with no required pressure containment.
$
25.35
Qty:
$
0.70
Qty:
$
38.00
Qty:
Part #:503205
- Spline Bit 2-Cutter 1/2" x 16"
Milwaukee®'s Spline 2-Cutter Rotary Hammer drill bits are used for drilling intro brick, block, and concrete
Qty:
Part #:500551
- 3/4" Drive Extensions
&bull Chrome plating provides increased protection from rust and corrosion
&bull Ball and spring socket retention
Qty:
Qty:
Qty:
Qty:
Displaying: 1 - 24 of 49 Matching Items