Hilti
Crescent
closeout
$36.39 MSRP
$
24.38
Qty:
Part #:501143
- 8" Adjustable Black Oxide Wrench - Carded
Crescent Adjustable Wrenches feature a large knurl for easy adjustment and a tight jaw fit. Its hex jaw design helps reduce slippage and tightly grips the fastener for solid, secure operation, while the corrosion-resistant black oxide finish helps prevent rusting. A wide handle design provides comfort and reduces fatigue during extended use, ideal for both pros and do-it-yourself enthusiasts.
Qty:
Part #:511253
- COO CN Prop 65 :
- WARNING
Qty:
Part #:511262
-
HDM Manual adhesive dispenser Manual dispenser HDM 500 + black cartr #3498241
Manual hybrid/epoxy adhesive anchor dispenser
Dispenser typeManual
$
307.12
Qty:
Part #:511296
-
HIT-Z Anchor rod Anchor rod HIT-Z 5/8" x 9-1/2" #2018448Material, corrosionCarbon steel, zinc-platedWrench/nut size15/16 inDrill bit diameter3/4 inBase materialsConcrete (cracked), Concrete (uncracked)PROFIS SoftwareYesApprovals / Test reportsICC-ES report (concrete)Cleaning proceduresNon CleaningType of fixingPre-fastening, Through-fasteningProduct ClassUltimate
Part #:511332
-
HIT-RE 500 V3 Epoxy anchor Epoxy adh RE 500-V3 11.1oz/330ml #2123401 Base materialsConcrete (cracked), Concrete (uncracked)Base material conditionDry, Submerged, Water-filled, WetApprovals / Test reportsICC-ES report (concrete)Seismic loadingYesPROFIS SoftwareYesClean-TecNoCleaning proceduresAutomatic Cleaning (SafeSet Hollow Drill Bit), Compressed-Air CleaningStorage and transportation temperature range41 - 77 °FIn-service temperature &ndash range-40 - 158 °FShelf life from date of manufacture (at 73°F/23°C and 50% relative humidity)12 monthsProduct informationThis product is subject to the Chemicals Prohibition Ordinance (ChemVerbotsV). It is to be used by professionals within the scope of their work and, in accordance with § 8 para. 3 no. 1 of the ChemVerbotsV, is to be used exclusively for its intended purpose as anchor adhesive, for rebar connections (typically steel-to-concrete and/or concrete-to-concrete connections), as well as for other intended fastening and uses within the scope of construction activities. Purchasers must comply with all existing legal requirements for the use of these products and may use them only as permitted. Information in the safety data sheets and operating instructions on the use of these products, the hazards associated with their use, the necessary safety measures during intended use and in the event of unforeseen spillage or release, and proper disposal must always be observed. The operating instructions and safety data sheets can be accessed in the detailed view of the products concerned at www.hilti.de in a format that can be saved and printed, and the operating instructions are enclosed with the products. Safety instructions Wear protective gloves/protective clothing/eye protection/face protection. Do not get in eyes, on skin or on clothing. In case of contact with eyes rinse thoroughly with water for several minutes. Remove contact lenses if possible, continue rinsing. If eye irritation, skin irritation or rash persist seek medical advice/attention. In case of contact with skin wash with plenty of soap and water. Disposal Completely emptied cartridges can be disposed of via the Dual System (yellow garbage can). Full/partially emptied containers are to be disposed of as special waste.Product ClassUltimate
$
85.86
Qty:
closeout
$25.67 MSRP
$
18.60
Part #:511464
- CLOSEOUTS Only 5 Left!
- 10" Nail Puller (Discontinued being replaced by NPWC10)
Tackle your next renovation or demolition project with the latest innovations from Crescent. Our new tools are designed around powerful innovations that allow the user to attack projects from the best angle, adjust your tool to fit the task at hand, and just get the job done faster and easier than before. This series of tools offers a wide array of demolition and renovation tools. All Crescent pry bars have precision ground edges that make it easier to access tight spaces and help minimize damage to finished areas, as well as a crow bar end with a nail puller slot for standard crow bar use. Durable two-tone dual material grips provide comfort, control, and added safety.
Qty:
Part #:511731
-
HDM Manual adhesive dispenser Manual dispenser HDM 500 + red cartr #3498242
Manual hybrid/epoxy adhesive anchor dispenser
Dispenser typeManual
$
307.12
Qty:
$
47.15
Qty:
Part #:511740
-
Cartridge holder red HIT-CR 500 #2007059
$
48.09
Qty:
closeout
$31.14 MSRP
$
20.86
Qty:
closeout
$64.85 MSRP
$
43.45
Part #:504410
- CLOSEOUTS Only 3 Left!
- (Discontinued being replaced by AC212VS)
Qty:
Part #:511331
-
HIT-HY 200-A V3 Adhesive anchor (New Verision)
Ultimate-performance injectable hybrid mortar with approvals for anchoring structural steel baseplate and post-installed rebar connections
Base materialsConcrete (cracked), Concrete (lightweight), Concrete (uncracked)
Approvals / Test reportsDOT approval (contact Hilti), ICC-ES report (concrete), ICC-ES report (masonry), LABC, Seismic
PROFIS SoftwareYes
Base materialsConcrete (cracked), Concrete (lightweight), Concrete (uncracked)Approvals / Test reportsDOT approval (contact Hilti), ICC-ES report (concrete), ICC-ES report (masonry), LABC, SeismicPROFIS SoftwareYesClean-TecNoCleaning proceduresAutomatic Cleaning (SafeSet Hollow Drill Bit), Compressed-Air Cleaning, Non CleaningStorage and transportation temperature range41 - 77 °FIn-service temperature &ndash range-40 - 248 °FShelf life from date of manufacture (at 73°F/23°C and 50% relative humidity)12 monthsProduct ClassUltimate
HIT-HY 200-A Adhesive anchor Hybrid adh HY 200-A 11.1oz/330ml #2022791 (Old Verision)Base materialsConcrete (cracked), Concrete (uncracked), Masonry (grout-filled CMU)Base material conditionDry, WetApprovals / Test reportsICC-ES report (concrete), SeismicSeismic loadingYesFatigue loadingNoFire resistanceNoPROFIS SoftwareYesClean-TecNoAnchoring elementsHAS threaded rods, HIS-N internally threaded sleeves, HIT-Z torque controlled bonded anchors, RebarCleaning proceduresAutomatic Cleaning (SafeSet Hollow Drill Bit), Compressed-Air Cleaning, Non CleaningStorage and transportation temperature range41 - 77 °FIn-service temperature &ndash range-40 - 248 °FShelf life from date of manufacture (at 73°F/23°C and 50% relative humidity)12 monthsProduct ClassUltimate
$
67.61
Qty:
Part #:511683
-
HIT-HY 200-R Adhesive anchor Hybrid adh HY 200-R 11.1oz/330ml #2022793 Replaced By HIT-HY 200-R V3
Ultimate-performance injectable hybrid mortar with approvals for post-installed rebar connections and anchoring structural steel baseplate
Base materials Concrete (cracked), Concrete (lightweight), Concrete (uncracked)
Approvals / Test reports DOT approval (contact Hilti), ICC-ES report (concrete), ICC-ES report (masonry), LABC, Seismic
PROFIS Software Yes
$
67.61
Qty:
Part #:690-AT215SPUD
- 16" Adjustable Black Oxide Construction Wrench
Crescent Adjustable Construction Wrenches feature a round, tapered tang for easy alignment of bolt holes. A large knurl allows for easy adjustment and a tight-fitting hex jaw design reduces slippage and tightly grips the fastener for solid, secure operation. The corrosion-resistant black oxide finish helps prevent rust. This is the ideal wrench for any iron or steel worker's tool box.
Qty:
Part #:500192
- Kwik Bolt 1 carbon steel wedge anchor
High-performance wedge anchor for cracked concrete and seismic (carbon steel)
Material, corrosionCarbon steel, zinc-plated
Head configurationExternally threaded
Drilling Method (AS)Hammer Drilling, Hollow Drill Bit Drilling
Material, corrosionCarbon steel, zinc-platedHead configurationExternally threadedDrilling Method (AS)Hammer Drilling, Hollow Drill Bit DrillingInstallation toolsTE 6-A36 Cordless rotary hammer, SIW 6AT-A22 Cordless impact wrench
$
7.49
Qty:
Part #:508597
-
TE-CX (SDS Plus) Imperial hammer drill bit Hammer drill bit TE-CX 5/8" x 12" #435019
Connection endTE-C (SDS Plus)Base materialReinforced concrete, Concrete, Brick, MasonryWorking modeHammer drillingHead shapeMulti CutterHead material compositionTungsten carbideNumber of cutting edges4Diameter5/8 inLength12 inWorking length10 inProduct ClassUltimate
$
96.94
Qty:
Part #:507221
-
HVU2 Anchor capsule Adhesive capsule HVU2 1/2" x 4 1/4" #2234721
Ultimate-performance foil capsule for heavy-duty anchoring in concrete
PROFIS SoftwareYes
Tested/approved for diamond drillingYes
In-service temperature &ndash range-40 - 248 °F
PROFIS SoftwareYesTested/approved for diamond drillingYesIn-service temperature &ndash range-40 - 248 °FStorage and transportation temperature range-4 - 77 °FShelf life from date of manufacture (at 73°F/23°C and 50% relative humidity)24 monthsProduct ClassUltimate
Part #:508616
- Kwik Bolt 1 carbon steel wedge anchor
High-performance wedge anchor for cracked concrete and seismic (carbon steel)
Material, corrosionCarbon steel, zinc-plated
Head configurationExternally threaded
Drilling Method (AS)Hammer Drilling, Hollow Drill Bit Drilling
Material, corrosionCarbon steel, zinc-platedHead configurationExternally threadedDrilling Method (AS)Hammer Drilling, Hollow Drill Bit DrillingInstallation toolsTE 6-A36 Cordless rotary hammer, SIW 6AT-A22 Cordless impact wrench
$
2.53
Qty:
Part #:805310
- Kwik Bolt 1 carbon steel wedge anchor
High-performance wedge anchor for cracked concrete and seismic (carbon steel)
Material, corrosionCarbon steel, zinc-plated
Head configurationExternally threaded
Drilling Method (AS)Hammer Drilling, Hollow Drill Bit Drilling
Material, corrosionCarbon steel, zinc-platedHead configurationExternally threadedDrilling Method (AS)Hammer Drilling, Hollow Drill Bit DrillingInstallation toolsTE 6-A36 Cordless rotary hammer, SIW 6AT-A22 Cordless impact wrench
$
3.36
Qty:
Part #:508621
- Kwik Bolt 1 carbon steel wedge anchor
High-performance wedge anchor for cracked concrete and seismic (carbon steel)
Material, corrosionCarbon steel, zinc-plated
Head configurationExternally threaded
Drilling Method (AS)Hammer Drilling, Hollow Drill Bit Drilling
Material, corrosionCarbon steel, zinc-platedHead configurationExternally threadedDrilling Method (AS)Hammer Drilling, Hollow Drill Bit DrillingInstallation toolsTE 6-A36 Cordless rotary hammer, SIW 6AT-A22 Cordless impact wrench
$
4.72
Qty:
Part #:510926
- 180 Piece 1/4" and 3/8" Drive 6 Point SAE/Metric Professional Tool Set
Crescent mechanics tools are made from Chrome alloy steel which is specially formulated and heat-treated for high strength and superior resistance to abrasion and corrosion. Wrenches, ratchets, sockets, and drive tools all have a flawless chrome finish to extend tool life. The sockets & the box end of the combination wrenches both feature off-corner loading which reduces fastener rounding. The wide selection of Crescent tools satisfies today&rsquos rigorous mechanics tool demands.
Qty:
Part #:811253
- 21 Piece 3/4" Drive 12 Point Standard SAE Mechanics Tool Set
The CRESCENT mechanic's tool sets are professional tool sets contain tools for industrial jobs. They come with durable, full polish Crestoloy® alloy steel ratchets, drive tools, and sockets that are reliable and resist rust and wear. The blow-molded case has a designated spot for each tool.
Contents
CRW19N
3/4" Drive 45-Tooth Quick Release Round Head Ratchet 20"
CDS100N
3/4" Drive 12 Point Standard SAE Socket 1-7/16"
CDS101N
3/4" Drive 12 Point Standard SAE Socket 1-1/2"
CDS102N
3/4" Drive 12 Point Standard SAE Socket 1-5/8"
CDS104N
3/4" Drive 12 Point Standard SAE Socket 1-3/4"
CDS105N
3/4" Drive 12 Point Standard SAE Socket 1-13/16"
CDS106N
3/4" Drive 12 Point Standard SAE Socket 1-7/8"
CDS107N
3/4" Drive 12 Point Standard SAE Socket 2"
CDS91N
3/4" Drive 12 Point Standard SAE Socket 7/8"
CDS92N
3/4" Drive 12 Point Standard SAE Socket 15/16"
CDS93N
3/4" Drive 12 Point Standard SAE Socket 1"
CDS94N
3/4" Drive 12 Point Standard SAE Socket 1-1/16"
CDS95N
3/4" Drive 12 Point Standard SAE Socket 1-1/8"
CDS97N
3/4" Drive 12 Point Standard SAE Socket 1-1/4"
CDS98N
3/4" Drive 12 Point Standard SAE Socket 1-5/16"
CDS99N
3/4" Drive 12 Point Standard SAE Socket 1-3/8"
CRW20N
3/4" Drive Extension 4"
CRW21N
3/4" Drive Extension 8"
CRW22N
3/4" Drive Extension 16"
CRW23N
3/4" Drive Flex Handle/Breaker Bar 19"
Qty:
Part #:510924
- 70 Piece 1/4" & 3/8" Drive 6 & 12 Point Standard SAE/Metric Mechanics Tool Set
The CRESCENT mechanics tool sets are professional tool sets contain tools for industrial jobs. They come with durable, full polish chrome alloy steel ratchets, drive tools, and sockets that are reliable and resist rust and wear. Also included in the CTK70C are full polish combination wrenches, bits, and hex keys. The heavy-duty blow-molded case with a designated spot for each tool.
Contents
CDS0N
1/4" Drive 6 Point Standard SAE Socket 5/32"
CDS11N
1/4" Drive 6 Point Standard Metric Socket 4mm
CDS12N
1/4" Drive 6 Point Standard Metric Socket 5mm
CDS13N
1/4" Drive 6 Point Standard Metric Socket 6mm
CDS14N
1/4" Drive 6 Point Standard Metric Socket 7mm
CDS15N
1/4" Drive 6 Point Standard Metric Socket 8mm
CDS16N
1/4" Drive 6 Point Standard Metric Socket 9mm
CDS17N
1/4" Drive 6 Point Standard Metric Socket 10mm
CDS18N
1/4" Drive 6 Point Standard Metric Socket 11mm
CDS19N
1/4" Drive 6 Point Standard Metric Socket 12mm
CDS1N
1/4" Drive 6 Point Standard SAE Socket 3/16"
CDS2N
1/4" Drive 6 Point Standard SAE Socket 7/32"
CDS3N
1/4" Drive 6 Point Standard SAE Socket 1/4"
CDS4N
1/4" Drive 6 Point Standard SAE Socket 9/32"
CDS5N
1/4" Drive 6 Point Standard SAE Socket 5/16"
CDS6N
1/4" Drive 6 Point Standard SAE Socket 11/32"
CDS7N
1/4" Drive 6 Point Standard SAE Socket 3/8"
CDS8N
1/4" Drive 6 Point Standard SAE Socket 7/16"
CDS25N
3/8" Drive 12 Point Standard SAE Socket 3/8"
CDS26N
3/8" Drive 12 Point Standard SAE Socket 7/16"
CDS27N
3/8" Drive 12 Point Standard SAE Socket 1/2"
CDS28N
3/8" Drive 12 Point Standard SAE Socket 9/16"
CDS29N
3/8" Drive 12 Point Standard SAE Socket 5/8"
CDS30N
3/8" Drive 12 Point Standard SAE Socket 11/16"
CDS31N
3/8" Drive 12 Point Standard SAE Socket 3/4"
CDS40N
3/8" Drive 12 Point Standard Metric Socket 10mm
CDS41N
3/8" Drive 12 Point Standard Metric Socket 11mm
CDS42N
3/8" Drive 12 Point Standard Metric Socket 12mm
CDS43N
3/8" Drive 12 Point Standard Metric Socket 13mm
CDS44N
3/8" Drive 12 Point Standard Metric Socket 14mm
CDS45N
3/8" Drive 12 Point Standard Metric Socket 15mm
CDS47N
3/8" Drive 12 Point Standard Metric Socket 17mm
CDTA6C
1/4" Drive Extension 2"
CDTA8C
3/8" Drive Extension 3"
CR14
1/4" Drive 72-Tooth Quick Release Teardrop Ratchet 5"
CRW25C
1/4" Drive Dual Material Bit Holding Screwdriver Handle
CR38
3/8" Drive 72-Tooth Quick Release Teardrop Ratchet 8.5"
Qty:
Displaying: 1 - 24 of 159 Matching Items